PA Parting out 72 Blazer

[doo142]

I would take Rear bumper brackets

[1rippen6]

Originally Posted by doo142

I would take Rear bumper brackets

30 plus shipping let me get them off may fit in a medium flat rate for 13.

Originally Posted by drillrod

Put me in line for rear view mirrow!

Mirror is there but junk

Originally Posted by bigrigpardo

how bad is the tub?

LOL tub is wasted PO sprayed foamed under the entire body and filled most cavities with it also

[bigrigpardo]

Originally Posted by 1rippen6

LOL tub is wasted PO sprayed foamed under the entire body and filled most cavities with it also

I guess he wanted a amphicar blazer version. what a shame it looked like a well optioned truck. you find good stuff in your neck of the woods.

[tjsblazer]

Passenger seat hold down shown in pic in post #18.

Is the front bumper OE or aftermarket? Condition ?

Drivers outer seatbelt. I am looking for one where the plastic boot isn't split in black.

The metal clips that bolt on the firewall for wire harness routing.

Condition of gaskets on the fuel filler. Both the thin flat one where it screws to the inner quarter panel and the lower thick on where it goes through the bed floor.

Condition of Wiper transmission arms.

W/H clips along the Drivers Frame rail.

Thanks.

[Blazerowner]

I would be interested in the drivers seat brackets. How much shipped to 95982?

[craneboy72]

What condition are the tail light lenses and backup light lens are the oe

[chevypoint]

How about the k5 fender badges and Lower trim?

[hybridchevy71]

Good morning Dwayne I take the seat brackets like have told, Pm me thank you

[dutchmanz]

Originally Posted by 1rippen6

Double wall

I was looking for a single so thanks.

How about the seat belts? If they are black, I'd be interested in front or rear or both.

[doo142]

Originally Posted by 1rippen6

30 plus shipping let me get them off may fit in a medium flat rate for 13.



Mirror is there but junk



LOL tub is wasted PO sprayed foamed under the entire body and filled most cavities with it also

Sounds good, no hurry just lmk, thanks

[dozerbill72]

Does it have a fuel filler cover? If so how much shipped to 46001?

Thanks,,,Bill

[1rippen6]

Originally Posted by dirish

I'll take the jack/ hardware pending pictures. Thanks
Daniel

Spring broke when I stretched it so 17 shipped for what is left let me know if interested

[1rippen6]

Originally Posted by bluek5

Gravel shields for the rear bumper?

Gravel shield are rough probably fixable but don't know if it is worth 20 plus shipping if interested let me know

[1rippen6]

Originally Posted by MikeCofield

Also interested in all hardware that hold top on

Tow hooks and leveling mats sold here are the mounting brackets 55 shipped let me know if interested.

[1rippen6]

Originally Posted by tjsblazer

Passenger seat hold down shown in pic in post #18.

Is the front bumper OE or aftermarket? Condition ?

Drivers outer seatbelt. I am looking for one where the plastic boot isn't split in black.

The metal clips that bolt on the firewall for wire harness routing.

Condition of gaskets on the fuel filler. Both the thin flat one where it screws to the inner quarter panel and the lower thick on where it goes through the bed floor.

Condition of Wiper transmission arms.

W/H clips along the Drivers Frame rail.

Thanks.

Seat hold down is sold with seat brackets

Front bumper is OE does have a bend under the DS light but I think it is very fixable let me know if still interested

Seat belts in this one are not original may have what you need but will have to dig it out.

I took a picture of the firewall not sure which clips you are talking about

Rubber gaskets 10 for the pair the round one was glued on so small pieces come off when removing it from the filler neck.

Transmission arms splines look good bushings on stems look good and the bronze bushings look good. 20

Just realized what you where asking for wiring harness I have some loose how many do you need will post a picture so we are on the same page.

Plus shipping on prices

[1rippen6]

1 more picture

[1rippen6]

Originally Posted by Blazerowner

I would be interested in the drivers seat brackets. How much shipped to 95982?

Hybridchevy71 sold pending funds

[1rippen6]

Originally Posted by craneboy72

What condition are the tail light lenses and backup light lens are the oe

Heres a decent driver quality 30 plus shipping should fit in a medium flat rate for 13

[1rippen6]

Originally Posted by chevypoint

How about the k5 fender badges and Lower trim?

K5 emblems are starting to pot and the almost all of them have extra screw holes and a couple have some decent dents but if you are still interested can get close up pictures let me know.

[1rippen6]

Originally Posted by dutchmanz

I was looking for a single so thanks.

How about the seat belts? If they are black, I'd be interested in front or rear or both.

Let me look in my stash and will let you know.

[1rippen6]

Originally Posted by doo142

Sounds good, no hurry just lmk, thanks

Tried to remove today but I will need to get the torch out

Originally Posted by dozerbill72

Does it have a fuel filler cover? If so how much shipped to 46001?

Thanks,,,Bill

I will try and remove it tomorrow and let you know condition and price

[dirish]

Originally Posted by 1rippen6

Spring broke when I stretched it so 17 shipped for what is left let me know if interested

Gonna pass thanks

[1rippen6]

Originally Posted by dirish

Gonna pass thanks

No problem thanks for letting me know.

[chevypoint]

Originally Posted by 1rippen6

K5 emblems are starting to pot and the almost all of them have extra screw holes and a couple have some decent dents but if you are still interested can get close up pictures let me know.

Thank, I'll pass.

[craneboy72]

Payment sent for rear lenses