MO 1969 - 70 cab cuts and parts from part out - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Clatterville trolley** · 09-24-2015, 09:26 PM

Quote:

Originally Posted by trukman1

I noticed the A/C dash was cut off. Do you still have it and is it for sale if you do?

I still have it and will be using the dash in the truck I am currently building. Thanks for your interest though. Jay

stepbox · 03-10-2016, 11:55 PM

I need the floor in the cab corners for a 69,I seen in your picture of the green body they look decent

**Clatterville trolley** · 03-11-2016, 12:32 AM

Quote:

Originally Posted by stepbox

I need the floor in the cab corners for a 69,I seen in your picture of the green body they look decent

Let me get a photo or two that shows it better than the first ones in this post. Then you can tell me what parts you want or if you are still interested. Jay

**Clatterville trolley** · 03-11-2016, 10:46 PM

Quote:

Originally Posted by Clatterville trolley

Let me get a photo or two that shows it better than the first ones in this post. Then you can tell me what parts you want or if you are still interested. Jay

Here are photos of what it looks like - let me know if it will suit your needs:

Name: DSCN1490 (2).jpg
Views: 462
Size: 66.3 KB

Name: DSCN1491 (2).jpg
Views: 477
Size: 72.7 KB

Name: DSCN1492 (2).jpg
Views: 469
Size: 71.3 KB

Name: DSCN1493 (2).jpg
Views: 472
Size: 71.1 KB

Name: DSCN1494 (2).jpg
Views: 466
Size: 80.1 KB

**Clatterville trolley** · 03-11-2016, 10:49 PM

More:

Name: DSCN1496 (2).jpg
Views: 322
Size: 74.4 KB

stepbox · 03-12-2016, 09:52 AM

Quote:

Originally Posted by Clatterville trolley

Here are photos of what it looks like - let me know if it will suit your needs:

Attachment 1509135

Attachment 1509136

Attachment 1509137

Attachment 1509138

Attachment 1509139

The passenger side looks decent ,How much to cut that corner from the cab mount out.
Also wondered if you have any step box fenders you can cut up.

carguygregg · 09-29-2015, 09:54 PM

Thanks again Jay for the cross sills. They will work great in my truck. It was good meeting you and enjoy looking over your parts lot and talking trucks! I will be getting back with you on some more things I'm sure.

**Clatterville trolley** · 09-29-2015, 10:04 PM

Quote:

Originally Posted by carguygregg

Thanks again Jay for the cross sills. They will work great in my truck. It was good meeting you and enjoy looking over your parts lot and talking trucks! I will be getting back with you on some more things I'm sure.

Super to have you stop by! Look forward to being able to help you out again. Good to meet you and hope to see you again soon. Jay

chewychevy67 · 10-01-2015, 05:10 PM

Thanks. I'll take the spring too. Send me a pm with total. Thanks, Rod.

**Clatterville trolley** · 10-01-2015, 05:15 PM

Quote:

Originally Posted by chewychevy67

Thanks. I'll take the spring too. Send me a pm with total. Thanks, Rod.

Let me get a photo of it and post so that we are sure it is what you are looking for. Thanks again, Jay.

PS- What about the size of the cuts I sent - OK? Sure hope so.

chewychevy67 · 10-01-2015, 05:31 PM

cuts will be just fine. the spring is in the 2nd photo of post 5 on the right side under the cowl that goes between the body and the cowl door.

**Clatterville trolley** · 10-04-2015, 09:14 PM

Quote:

Originally Posted by chewychevy67

cuts will be just fine. the spring is in the 2nd photo of post 5 on the right side under the cowl that goes between the body and the cowl door.

OK, I see what you are talking about - I thought maybe it was the spring that went inside the cab by passenger's feet on the vent door in A/C application.
I do have both springs and will get the one you asked about and send it to you. Jay

ekgguy · 10-04-2015, 11:24 PM

Is there a difference between the inner fenders for a wood bed and a steel bed?

**Clatterville trolley** · 10-04-2015, 11:33 PM

Quote:

Originally Posted by ekgguy

Is there a difference between the inner fenders for a wood bed and a steel bed?

I don't know if they are the same or not. I looked in an LMC catalog and couldn't see that they listed two. Either no one repops the ones for wooden floor beds or they are the same ones used on both applications.

Hopefully someone who knows will 'chime' in to give us some guidance. In the mean time I will try to find out more.

Jay

**Clatterville trolley** · 10-06-2015, 09:45 AM

Quote:

Originally Posted by ekgguy

Is there a difference between the inner fenders for a wood bed and a steel bed?

I have placed a post on the discussion forum asking and have gotten two answers so far and they think they are the same. One person has a pair that came off of each one - steel floor and wood floor - and they are going to check them out side by side. Should know for sure pretty quick. Jay

ekgguy · 10-06-2015, 10:34 AM

Quote:

Originally Posted by Clatterville trolley

I have placed a post on the discussion forum asking and have gotten two answers so far and they think they are the same. One person has a pair that came off of each one - steel floor and wood floor - and they are going to check them out side by side. Should know for sure pretty quick. Jay

Thanks for doing the research Jay.

**dutchmanz** · 02-10-2016, 11:48 PM

Do you still have the cab? I need the left rear corner of the cab.

**Clatterville trolley** · 02-10-2016, 11:55 PM

Quote:

Originally Posted by dutchmanz

Do you still have the cab? I need the left rear corner of the cab.

I still have that part - how much do you want? Can you send me a photo showing the area you want to replace? My email address is:

1windyridgeboy@gmail.com

Thanks, Jay

**dutchmanz** · 02-10-2016, 11:58 PM

Quote:

Originally Posted by Clatterville trolley

I still have that part - how much do you want? Can you send me a photo showing the area you want to replace? My email address is:

1windyridgeboy@gmail.com

Thanks, Jay

I'll try to get something tomorrow and email it to you.

ne1988 · 02-12-2016, 10:34 AM

You still have the frame?

Oddfire · 02-12-2016, 11:35 AM

Is this area of the cab above pass side door available for cut & what shape is this area in? I'd like the cut to be about 6" from the side edge of the drip rail & inc about 4" of the post piller. The back I'd like to have cut just below the seam about 2". Jamie71

Longhorn

**Clatterville trolley** · 02-12-2016, 01:40 PM

Quote:

Originally Posted by ne1988

You still have the frame?

Yes, I still have the frame. It is a LWB frame and is in pretty good shape - not rusted up back under where bed sits. I live in Columbia, MO just off the intersection of 63 North Hwy and I-70 interstate about 130 miles East of K.C. MO. Jay

**Clatterville trolley** · 02-13-2016, 02:00 PM

Quote:

Originally Posted by dutchmanz

I'll try to get something tomorrow and email it to you.

Here are photos of the part I have. You will notice that I have numbered the lines incase I haven't allowed enough to do what you want you can indicate by saying increase #1 or decrease #3, etc. Hope that helps us communicate accurately. Jay

Name: DSCN1511 (1).jpg
Views: 346
Size: 36.3 KB

Name: DSCN1511 (1).jpg
Views: 346
Size: 36.3 KB

Name: DSCN1510 (1).jpg
Views: 328
Size: 41.7 KB

Name: DSCN1509 (1).jpg
Views: 331
Size: 40.9 KB

Name: DSCN1513 (1).jpg
Views: 295
Size: 39.1 KB

**dutchmanz** · 02-13-2016, 02:09 PM

Quote:

Originally Posted by Clatterville trolley

Here are photos of the part I have. You will notice that I have numbered the lines incase I haven't allowed enough to do what you want you can indicate by saying increase #1 or decrease #3, etc. Hope that helps us communicate accurately. Jay

I think that will be perfect for what I need.

**dutchmanz** · 02-20-2016, 11:31 PM

Sent you a PM

03-10-2016, 11:55 PM	#2
stepbox Registered User Join Date: Dec 2015 Location: Grand Rapids Mich. Posts: 50	Re: 1969 - 70 cab cuts and parts from part out I need the floor in the cab corners for a 69,I seen in your picture of the green body they look decent

03-11-2016, 10:49 PM	#5
Clatterville trolley Senior Member Join Date: Apr 2013 Location: Columbia, MO Posts: 1,934	Re: 1969 - 70 cab cuts and parts from part out More:

09-29-2015, 09:54 PM	#7
carguygregg Registered User Join Date: Mar 2014 Location: jefferson city, mo. Posts: 6	Re: 1969 - 70 cab cuts and parts from part out Thanks again Jay for the cross sills. They will work great in my truck. It was good meeting you and enjoy looking over your parts lot and talking trucks! I will be getting back with you on some more things I'm sure.

10-01-2015, 05:10 PM	#9
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,537	Re: 1969 - 70 cab cuts and parts from part out Thanks. I'll take the spring too. Send me a pm with total. Thanks, Rod.

10-01-2015, 05:31 PM	#11
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,537	Re: 1969 - 70 cab cuts and parts from part out cuts will be just fine. the spring is in the 2nd photo of post 5 on the right side under the cowl that goes between the body and the cowl door.

10-04-2015, 11:24 PM	#13
ekgguy Registered User Join Date: Jan 2012 Location: Humble, Texas Posts: 414	Re: 1969 - 70 cab cuts and parts from part out Is there a difference between the inner fenders for a wood bed and a steel bed? __________________ Matt Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=672655 "Father thank you for the gathering of friends, Father we give thanks for all the choices we've made because that's what makes us who we are, let us forever cherish the loved ones we've lost along the way and most of all *THANK YOU FOR FAST CARS!"*

02-10-2016, 11:48 PM	#17
dutchmanz Knuckle Buster, Instructor Join Date: May 2010 Location: Pantego, NC Posts: 562	Re: 1969 - 70 cab cuts and parts from part out Do you still have the cab? I need the left rear corner of the cab. __________________ Current classic fleet: 72 K5 Blazer CST, unrestored factory Orange paint...mostly 69 C10 factory SWB, 454, TH400, Saddle tan, Rust-o-ration 53 Studebaker M35 w/331 Reo gas I-6, Air Force Strata Blue

02-12-2016, 10:34 AM	#20
ne1988 Registered User Join Date: Feb 2016 Location: Nebraska Posts: 2	Re: 1969 - 70 cab cuts and parts from part out You still have the frame?

02-12-2016, 11:35 AM	#21
Oddfire Registered User Join Date: Jan 2013 Location: Front Royal, Va Posts: 689	Re: 1969 - 70 cab cuts and parts from part out Is this area of the cab above pass side door available for cut & what shape is this area in? I'd like the cut to be about 6" from the side edge of the drip rail & inc about 4" of the post piller. The back I'd like to have cut just below the seam about 2". Jamie71Longhorn Attached Images

02-20-2016, 11:31 PM	#25
dutchmanz Knuckle Buster, Instructor Join Date: May 2010 Location: Pantego, NC Posts: 562	Re: 1969 - 70 cab cuts and parts from part out Sent you a PM __________________ Current classic fleet: 72 K5 Blazer CST, unrestored factory Orange paint...mostly 69 C10 factory SWB, 454, TH400, Saddle tan, Rust-o-ration 53 Studebaker M35 w/331 Reo gas I-6, Air Force Strata Blue



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.