LS1 into a 73 cheyenne - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

smokedat · 12-10-2009, 06:32 PM

deleted double post

smokedat · 12-10-2009, 06:36 PM

yeah there 799 virtually the same as 243 casting. The exhaust port is D-shape wich come on the LS6

smokedat · 12-10-2009, 06:39 PM

Belt, A/C compressor, and power steering pulley are off. Waiting on the A/C relocator pwr steering pulley and belt.

smokedat · 12-10-2009, 06:46 PM

There is no difference between the two heads. The numbers tell what original mold the casting came from. 243 mold was done at GM Research, the 799 mold is used by other vendors. The same vendor will have 243 and 799 molds. The numbers are just a GM system for when the mold was made. If a head had a problem it helps them track down where the problem started. The only difference between the heads is production variance.

smokedat · 12-10-2009, 06:50 PM

menace121978 the radiator was 700 shipped 645 with trans cooler w/o 595, as for the clean up I used regular break cleaner works good.

mcbassin · 12-10-2009, 07:34 PM

Awesome swap out! Will be watching this one.

menace121978 · 12-10-2009, 07:38 PM

subscribing to this one also...

smokedat · 12-10-2009, 08:09 PM

What do u guys use for flaring lines i need to get a flaring kit i like this Matco tools kit

PREM DOUBLE FLARING KIT

* Quick slip-on yoke for easy use
* Ideal for brake, ATF, A/C, fuel and vacumm lines
* High quality, professional full polish chrome flaring bar
* For 1/4", 5/16", 3/8", and 1/2" O.D. tubing
* Easy operating, ball bearing flaring cone
* Matco Exclusive Stainless Steel Tube Cutter (SSTC1010) included

smokedat · 12-10-2009, 08:14 PM

# Type: 45° Flaring Tool
# Maximum Pipe Capacity (Inch): 3/4
# Minimum Pipe Capacity (Inch): 1/8

menace121978 · 12-10-2009, 08:18 PM

just remember for the AN fittings they use a 37* flare. brake lines and such use the 45*.

my 45* is a craftsman and i'm really happy with it. right around $80. i had bought 2 cheapo ones from orielly and broke'em both.

i'm going to order a summit brand 37* for the an fittings.

**lolife99** · 12-10-2009, 08:22 PM

subscribing,...

smokedat · 12-10-2009, 08:24 PM

the best one by far is this but its more expensive

smokedat · 12-10-2009, 08:26 PM

Mastercool

menace121978 · 12-10-2009, 08:27 PM

Whoa!

smokedat · 12-10-2009, 08:27 PM

"Dennis the Menace" i agree the cheap flaring tools just don't work especially on stainless steel

smokedat · 12-10-2009, 08:31 PM

has anyone used rubber type if so how is it holding up?

sample pic

menace121978 · 12-10-2009, 08:33 PM

ive heard they hold great when used with the right high psi hose clamps. not those pictured

the screw type.

clinebarger · 12-10-2009, 09:52 PM

Quote:

Originally Posted by smokedat

There is no difference between the two heads. The numbers tell what original mold the casting came from. 243 mold was done at GM Research, the 799 mold is used by other vendors. The same vendor will have 243 and 799 molds. The numbers are just a GM system for when the mold was made. If a head had a problem it helps them track down where the problem started. The only difference between the heads is production variance.

I did not know that. Out of the 100+ LS6/LS2s ive seen/worked on they all had a 243 casting number. are the heads production? Or a GMPP part?

Thealien · 12-10-2009, 09:55 PM

I recently bought the mastercool hydraulic flaring tool. It is "THE" flaring tool! The only flare die it doesn't have is the 37 degree and I "may" add it. I bought it just for the GM pushloc flare, everything else is a bonus. Anyone can make a good flare with that tool! It can be found for just under $300 if you look.

smokedat · 12-11-2009, 01:04 AM

clinebarger

so i did some research on the net, and i think im finding that the 799 was a pre production ls6 head, and the 243 replaced them, but im also seeing some 06 corvettes with the 799 heads as well??

Casting number 799 is also an LS2 head. Came on some late 06 and up tbss and other LS2 vehicles. These are the mexico cast heads. Little rougher finish. Same basic head and flow though.

smokedat · 12-11-2009, 01:06 AM

Thealien

Thanks for the recomendation will look into getting one.

smokedat · 12-11-2009, 01:25 AM

Wilwood tandem chamber master cylinder 1 1/8 bore

3r!c84 · 12-11-2009, 07:40 AM

how much was that little guy?

78-5.3 · 12-11-2009, 09:29 AM

Quote:

Originally Posted by smokedat

has anyone used rubber type if so how is it holding up?

sample pic

i used factory tahoe fule lines in my truck im amazed it not used as much??
i got them from a wreck 2001 tahoe your engine being from a camaro? why not look a the fuel lines from that?? i did some slight rebending but it followed down the back of the engine on the transmission across to the chassis rair down to the tank where i modified it to suit my 78 job done im sure the camaro lines have a similar setup

JohnC · 12-11-2009, 10:22 AM

This seems to be an awesome build. Definitely subscribing!

That willwood set up looks pretty sweet on there.

12-10-2009, 06:32 PM	#26
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 Swap to a 73 cheyenne deleted double post Last edited by smokedat; 12-16-2009 at 02:05 AM.

12-10-2009, 06:36 PM	#27
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne yeah there 799 virtually the same as 243 casting. The exhaust port is D-shape wich come on the LS6

12-10-2009, 06:39 PM	#28
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne Belt, A/C compressor, and power steering pulley are off. Waiting on the A/C relocator pwr steering pulley and belt. Attached Images

12-10-2009, 06:46 PM	#29
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne There is no difference between the two heads. The numbers tell what original mold the casting came from. 243 mold was done at GM Research, the 799 mold is used by other vendors. The same vendor will have 243 and 799 molds. The numbers are just a GM system for when the mold was made. If a head had a problem it helps them track down where the problem started. The only difference between the heads is production variance.

12-10-2009, 06:50 PM	#30
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne menace121978 the radiator was 700 shipped 645 with trans cooler w/o 595, as for the clean up I used regular break cleaner works good.

12-10-2009, 07:34 PM	#31
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: LS1 Swap to a 73 cheyenne Awesome swap out! Will be watching this one. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

12-10-2009, 07:38 PM	#32
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: LS1 Swap to a 73 cheyenne subscribing to this one also... __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list Last edited by menace121978; 12-10-2009 at 07:39 PM.

12-10-2009, 08:09 PM	#33
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne What do u guys use for flaring lines i need to get a flaring kit i like this Matco tools kit PREM DOUBLE FLARING KIT * Quick slip-on yoke for easy use * Ideal for brake, ATF, A/C, fuel and vacumm lines * High quality, professional full polish chrome flaring bar * For 1/4", 5/16", 3/8", and 1/2" O.D. tubing * Easy operating, ball bearing flaring cone * Matco Exclusive Stainless Steel Tube Cutter (SSTC1010) included Attached Images

12-10-2009, 08:14 PM	#34
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne # Type: 45° Flaring Tool # Maximum Pipe Capacity (Inch): 3/4 # Minimum Pipe Capacity (Inch): 1/8 Attached Images

12-10-2009, 08:18 PM	#35
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: LS1 into a 73 cheyenne just remember for the AN fittings they use a 37* flare. brake lines and such use the 45. my 45 is a craftsman and i'm really happy with it. right around $80. i had bought 2 cheapo ones from orielly and broke'em both. i'm going to order a summit brand 37* for the an fittings. __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list Last edited by menace121978; 12-10-2009 at 08:19 PM.

12-10-2009, 08:22 PM	#36
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: LS1 Swap to a 73 cheyenne subscribing,... __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

12-10-2009, 08:24 PM	#37
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne the best one by far is this but its more expensive

12-10-2009, 08:26 PM	#38
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne Mastercool Attached Images

12-10-2009, 08:27 PM	#39
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: LS1 into a 73 cheyenne Whoa! __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

12-10-2009, 08:27 PM	#40
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne "Dennis the Menace" i agree the cheap flaring tools just don't work especially on stainless steel



Register or Log In To remove these advertisements.

12-10-2009, 08:31 PM	#41
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne has anyone used rubber type if so how is it holding up? sample pic Attached Images

12-10-2009, 08:33 PM	#42
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: LS1 into a 73 cheyenne ive heard they hold great when used with the right high psi hose clamps. not those pictured the screw type. __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

12-10-2009, 09:55 PM	#44
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,125	Re: LS1 into a 73 cheyenne I recently bought the mastercool hydraulic flaring tool. It is "THE" flaring tool! The only flare die it doesn't have is the 37 degree and I "may" add it. I bought it just for the GM pushloc flare, everything else is a bonus. Anyone can make a good flare with that tool! It can be found for just under $300 if you look.

12-11-2009, 01:04 AM	#45
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne clinebarger so i did some research on the net, and i think im finding that the 799 was a pre production ls6 head, and the 243 replaced them, but im also seeing some 06 corvettes with the 799 heads as well?? Casting number 799 is also an LS2 head. Came on some late 06 and up tbss and other LS2 vehicles. These are the mexico cast heads. Little rougher finish. Same basic head and flow though.

12-11-2009, 01:06 AM	#46
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne Thealien Thanks for the recomendation will look into getting one.

12-11-2009, 01:25 AM	#47
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne Wilwood tandem chamber master cylinder 1 1/8 bore Attached Images

12-11-2009, 07:40 AM	#48
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: LS1 into a 73 cheyenne how much was that little guy? __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

12-11-2009, 10:22 AM	#50
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: LS1 into a 73 cheyenne This seems to be an awesome build. Definitely subscribing! That willwood set up looks pretty sweet on there.

Register or Log In To remove these advertisements.