CA Parting 3/4ton 2wd Big Block Truck - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**tll74** · 11-23-2010, 06:43 PM

Any intersest in selling the valve covers? Are they original GM? I have a pair of nos M/T's. Thanks, Tom

KrazyRay · 11-24-2010, 12:15 AM

Harold- $15 shipped on the switches, wire, screws.

1972SuperCheyenne- 2nd in line on high hump

tll74- I have stock BB valve covers $35 shipped

into69z · 11-26-2010, 10:23 AM

interested in the "396" emblems are they in good shape? how much shipped to 91739 please......thanks Steve

KrazyRay · 11-26-2010, 12:43 PM

Quote:

Originally Posted by into69z

interested in the "396" emblems are they in good shape? how much shipped to 91739 please......thanks Steve

They are in good shape. I will check studs when I pull them from the fenders. $40 shipped if the studs are good.
Thanks, Ray

71 super · 11-22-2010, 09:05 PM

Will you sell the courtesy light switchs and wire- It is the white wire running into the kick panel on both side and plugs into the jumper for the dome light. I would also be interested in the 2 long phillips (upper)screws that attach the a/c side vent covers to the dash. Thanks, Harold

BossHogg69 · 11-22-2010, 10:30 PM

how much for the high hump trans cover shipped to 72120?

Thanks,

Adam
Posted via Mobile Device

Youngbuck7072 · 11-23-2010, 12:36 AM

do you have to tail light bezels? pics??

KrazyRay · 11-23-2010, 02:38 AM

Harold- I will check on switches and wire. I might have some ac screws in the hardware bin.
Adam- $68 shipped on the high hump...I have cheaper ones with holes in them.
Youngbuck- Sorry, no good bezels.

Thanks, Ray

KrazyRay · 11-26-2010, 02:35 PM

Pics of High Hump. There are approx. 5 screw holes (see pics) and residual glue from the carpet. Other than that, it is in great shape.

fortytwo · 11-23-2010, 03:41 PM

Are the lower a arms the same as 67? If yes im intrested in them for lifting my 67 c10. do you have any of the other lift parts (88 lift spindals etc..).
Thanks
Ed

STOCKISH · 11-23-2010, 04:09 PM

I would be interested in a high hump cover as well as the floor section it bolts to so I can convert my small hump cab if thats possible.

KrazyRay · 11-29-2010, 10:35 AM

Quote:

Originally Posted by 1972SuperCheyenne

I would be interested in a high hump cover as well as the floor section it bolts to so I can convert my small hump cab if thats possible.

1972SuperCheyenne- you're up on the high hump. How much floor do you need?
Thanks, Ray

71 super · 11-24-2010, 10:14 PM

ray how do want to be paid? I can do paypal now. Sending pm thanks Harold

KrazyRay · 11-24-2010, 10:29 PM

Quote:

Originally Posted by 71 super

ray how do want to be paid? I can do paypal now. Sending pm thanks Harold

Harold, paypal is good...pm returned.
Thanks, Ray

55454 · 11-25-2010, 08:32 AM

Do you have the passenger side under cab exhaust hanger?

Thanks Tommy

Mr.C · 11-30-2010, 12:28 AM

Rims, and mirrors to 53073?

KrazyRay · 11-30-2010, 01:33 AM

Quote:

Originally Posted by Mr.C

Rims, and mirrors to 53073?

The rims without tires and the car side view mirrors is $210 shipped.
Thanks, Ray

vasquezmrysvll · 11-30-2010, 03:01 AM

ray hows the seat look?

KrazyRay · 11-30-2010, 10:38 AM

Quote:

Originally Posted by vasquezmrysvll

ray hows the seat look?

Art, the seat is in bad shape. It needs foam and cover.

projectjimmie68 · 12-01-2010, 11:18 AM

Do you have a set of transmission lines? If so how much shipped to zip 32136? Thanks Projectjimmie:

Mr.C · 12-02-2010, 11:56 AM

Center caps and lugs included? If so please post pics of all 4 rims.

Mr.C · 12-05-2010, 03:38 AM

Gotta pass on the rims. Nice set at a good price for someone out there...

**too much stuff** · 12-05-2010, 10:42 AM

Hi, got the kickdown switch and it looks good. Thanks.
Are the Camper/20 emblems still up for grabs? Eric

KrazyRay · 12-05-2010, 11:43 AM

Quote:

Originally Posted by too much stuff

Hi, got the kickdown switch and it looks good. Thanks.
Are the Camper/20 emblems still up for grabs? Eric

Yes, they are still available.
Thanks, Ray

vasquezmrysvll · 12-05-2010, 12:43 PM

thanks for the glass! hell-of-a-deal! -art

11-23-2010, 06:43 PM	#1
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting 3/4ton 2wd Big Block Truck Any intersest in selling the valve covers? Are they original GM? I have a pair of nos M/T's. Thanks, Tom __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

11-24-2010, 12:15 AM	#2
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 3/4ton 2wd Big Block Truck Harold- $15 shipped on the switches, wire, screws. 1972SuperCheyenne- 2nd in line on high hump tll74- I have stock BB valve covers $35 shipped Attached Images

11-26-2010, 10:23 AM	#3
into69z "brand new second-hand" Join Date: Feb 2007 Location: White House, Tennessee Posts: 526	Re: Parting 3/4ton 2wd Big Block Truck interested in the "396" emblems are they in good shape? how much shipped to 91739 please......thanks Steve __________________ Steve 69 3/4t custom camper tilt,am/fm,speed warning,air gauge,buddy buckets,aux battery, big block,p/s,p/b,a/c 67 Camaro 96 Impala ss-sold 04 hybrid Honda-saving gas for the blue truck!:b69:

11-22-2010, 09:05 PM	#5
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,081	Re: Parting 3/4ton 2wd Big Block Truck Will you sell the courtesy light switchs and wire- It is the white wire running into the kick panel on both side and plugs into the jumper for the dome light. I would also be interested in the 2 long phillips (upper)screws that attach the a/c side vent covers to the dash. Thanks, Harold __________________ 67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle

11-22-2010, 10:30 PM	#6
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Parting 3/4ton 2wd Big Block Truck how much for the high hump trans cover shipped to 72120? Thanks, Adam Posted via Mobile Device __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

11-23-2010, 12:36 AM	#7
Youngbuck7072 Registered User Join Date: Sep 2010 Location: Eugene, Or. Posts: 322	Re: Parting 3/4ton 2wd Big Block Truck do you have to tail light bezels? pics?? __________________ ........................ __ ............._______\|__\____ ............\|_({})______({})] ................(O)..........(O)

11-23-2010, 02:38 AM	#8
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 3/4ton 2wd Big Block Truck Harold- I will check on switches and wire. I might have some ac screws in the hardware bin. Adam- $68 shipped on the high hump...I have cheaper ones with holes in them. Youngbuck- Sorry, no good bezels. Thanks, Ray

11-26-2010, 02:35 PM	#9
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 3/4ton 2wd Big Block Truck Pics of High Hump. There are approx. 5 screw holes (see pics) and residual glue from the carpet. Other than that, it is in great shape. Attached Images

11-23-2010, 03:41 PM	#10
fortytwo Registered User Join Date: Oct 2010 Location: Stevens Point WI Posts: 42	Re: Parting 3/4ton 2wd Big Block Truck Are the lower a arms the same as 67? If yes im intrested in them for lifting my 67 c10. do you have any of the other lift parts (88 lift spindals etc..). Thanks Ed

11-23-2010, 04:09 PM	#11
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Parting 3/4ton 2wd Big Block Truck I would be interested in a high hump cover as well as the floor section it bolts to so I can convert my small hump cab if thats possible. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

11-24-2010, 10:14 PM	#13
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,081	Re: Parting 3/4ton 2wd Big Block Truck ray how do want to be paid? I can do paypal now. Sending pm thanks Harold __________________ 67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle

11-25-2010, 08:32 AM	#15
55454 55454 Join Date: Mar 2005 Location: Lafayette La. Posts: 340	Re: Parting 3/4ton 2wd Big Block Truck Do you have the passenger side under cab exhaust hanger? Thanks Tommy __________________ 72 Cheyenne 1956 3100 1955 210 19 year old Chihuahua (Factory Teeth)

11-30-2010, 12:28 AM	#16
Mr.C Registered User Join Date: Nov 2010 Location: Plymouth, WI Posts: 174	Re: Parting 3/4ton 2wd Big Block Truck Rims, and mirrors to 53073? __________________ How about you go over and introduce yourself, build me up, that way I don't have to brag about myself later.

11-30-2010, 03:01 AM	#18
vasquezmrysvll "the other guy" Join Date: Oct 2008 Location: Olivehurst California 95961 Posts: 901	Re: Parting 3/4ton 2wd Big Block Truck ray hows the seat look? __________________ God Said,"Building A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still....."EXPLETIVE"

12-01-2010, 11:18 AM	#20
projectjimmie68 Registered User Join Date: Oct 2009 Location: Flagler Beach,Fl. Posts: 455	Re: Parting 3/4ton 2wd Big Block Truck Do you have a set of transmission lines? If so how much shipped to zip 32136? Thanks Projectjimmie:



Register or Log In To remove these advertisements.

12-02-2010, 11:56 AM	#21
Mr.C Registered User Join Date: Nov 2010 Location: Plymouth, WI Posts: 174	Re: Parting 3/4ton 2wd Big Block Truck Center caps and lugs included? If so please post pics of all 4 rims. __________________ How about you go over and introduce yourself, build me up, that way I don't have to brag about myself later.

12-05-2010, 03:38 AM	#22
Mr.C Registered User Join Date: Nov 2010 Location: Plymouth, WI Posts: 174	Re: Parting 3/4ton 2wd Big Block Truck Gotta pass on the rims. Nice set at a good price for someone out there... __________________ How about you go over and introduce yourself, build me up, that way I don't have to brag about myself later.

12-05-2010, 10:42 AM	#23
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,769	Re: Parting 3/4ton 2wd Big Block Truck Hi, got the kickdown switch and it looks good. Thanks. Are the Camper/20 emblems still up for grabs? Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-05-2010, 12:43 PM	#25
vasquezmrysvll "the other guy" Join Date: Oct 2008 Location: Olivehurst California 95961 Posts: 901	Re: Parting 3/4ton 2wd Big Block Truck thanks for the glass! hell-of-a-deal! -art __________________ God Said,"Building A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still....."EXPLETIVE"

Register or Log In To remove these advertisements.