Updated thread on parts that are left - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

themeskin · 02-24-2009, 09:19 PM

randy hi ill take all of the parts / do the other 3 brackets are they for the speakeres also if they are are they inclued. thanks let me know on shipping to 79907 thanks again

**too much stuff** · 02-24-2009, 10:06 PM

I will take the nos tailgate part as long as it is straight and not scratched too bad. Are all of your clusters complete? or do you have some nice pickup fuel gauges seperate? I still have a power steering setup at your place yet? Thanks, Eric

BLAZERMAN · 02-24-2009, 10:20 PM

Randy, The mirrors #4 and #5..can you tell me how far apart the bottom braces are apart from each other....from center of hole to center of hole?

BluTrukker · 02-24-2009, 10:44 PM

What does "3) all chrome pile $30 NO SHIP" consist of?

**zeusflash** · 02-24-2009, 11:27 PM

Hi Randy, Need a total for 1 diverter and the A/C battery box to 83854, Thanks.

teeitup · 02-24-2009, 11:30 PM

rockc, sorry no they are not 2 1/2
themeskin, Rick, the speaker bracket set for 410 consists of the one on the left, one of the middle ones and one of the ones on the right. I have one other middle and 4 other of the ones on the right for $5 each
toomuchstuff, Eric, do you want me to get a shipping price or jsut set it back with the 67 PS setup? Sorry all the gauges are complete
Blazerman, Rob, I'll get a measurement hopefully Wed after work
blu Trukker, its just some chrome off 69-72 trucks that I've parted, I can see whats all there and get a pic for you, it would have to be picked up, no shipping.
Thanks Randy

teeitup · 02-24-2009, 11:32 PM

Zeusflash, sorry I must of been replying when you posted. I'll get a quote either Wed after work if not for sure Thurs after work.
Thanks Randy

yellowGT · 02-25-2009, 12:06 AM

randy in that pile of bumpers I see a bumper without the holes for the lights. Do you have a pic of that one and what condition is it in? shipping to 75040?

teeitup · 02-25-2009, 12:07 AM

I'll get it pulled out and a pic of it either Wed after work or Thurs after work. Thanks Randy

yellowGT · 02-25-2009, 12:10 AM

And how much for a good gauge cluster for 69

teeitup · 02-25-2009, 12:23 AM

The gauge clusters I have the bezels are not the best shape, some cracks, some chipped paint, some wear. I get $20 plus shipping for a complete setup with a good circuit board and bad bezel. Thanks Randy

**too much stuff** · 02-25-2009, 12:43 AM

Randy, go ahead and give me a total to 55744 when you have a chance. Try to save the original packaging if you can. Any other nos parts? Thanks.

teeitup · 02-25-2009, 12:46 AM

Eric, I'll get you a quote, I'll put it in PVC to protect it. This is the last piece of NOS I have, I wish I had more

. Thanks Randy

*MonteSS454* · 02-25-2009, 01:21 AM

Quote:

Originally Posted by teeitup

The gauge clusters I have the bezels are not the best shape, some cracks, some chipped paint, some wear. I get $20 plus shipping for a complete setup with a good circuit board and bad bezel. Thanks Randy

Shipping to 74019 on a complete cluster.

Any tach clusters?

weircc · 02-25-2009, 02:38 AM

i just bought some rear taillight housings from you couple weeks ago and guess what im back. i need a 67-68 bowtie grill emblem it can be trashed i just need it to practice my mod on before i cut my new one up also i need one rear brake line clip the one that holds rubber line to frame or rear end shipped to richmond mo 64085 let me know the total. BTW GUYS THIS GUY IS LEGIT THANKS

teeitup · 02-25-2009, 09:25 AM

Montess454, sorry no tachs. I'll pm you a total on a gauge cluster
weircc, sorry no 67-68 emblems right now and also no clips, I don't have any trucks here that I'm parting or I'd get one for you. THANKS for the kind words,
Randy

themeskin · 02-25-2009, 11:15 AM

hi randy ill take the jack swivel handle/ both wpier arms w blades/ and a set of the speaker brackets . the ones that contain 3 brackets middle , right, left can u send me the best of speaker brackets u can find thanks randy shipping 2 79907

**1970cstblazer** · 02-25-2009, 12:08 PM

I am interested in the pass side bed splash pan $10 Plus the ride to ZIP 14830.

teeitup · 02-25-2009, 05:42 PM

pic for Zeusflash

teeitup · 02-25-2009, 05:59 PM

yellowgt, bumper is for a gmc, has a dent in it too. Gauge setup shipped would be $35, Thanks Randy

**1970cstblazer** · 02-25-2009, 07:47 PM

Thanks Randy!

lil blue · 02-26-2009, 12:01 AM

Hey I was wondering do u have any clusters with a choke and no tach. Also do any of them have chrome
thanks

lil blue · 02-26-2009, 12:08 AM

Quote:

Originally Posted by lil blue

Hey I was wondering do u have any clusters with a choke and no tach. Also do any of them have chrome
thanks

and shipping to32812
Thanks

teeitup · 02-26-2009, 12:51 AM

1970cstblazer, I'll get it out to you Fri. Thanks
lil blue, no tachs in any of them, I'm sure some of them have choke holes with light switch and wipers on the left, I'll check Thurs, the bezels are worn with some cracks. $38 shipped for a gauge setup. Thanks Randy

yellowGT · 02-26-2009, 02:10 AM

thanks Randy.... i will have to pass on bumper

02-24-2009, 09:19 PM	#26
themeskin Registered User Join Date: Feb 2009 Location: el paso tx Posts: 125	Re: Updated thread on parts that are left randy hi ill take all of the parts / do the other 3 brackets are they for the speakeres also if they are are they inclued. thanks let me know on shipping to 79907 thanks again

02-24-2009, 10:06 PM	#27
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,769	Re: Updated thread on parts that are left I will take the nos tailgate part as long as it is straight and not scratched too bad. Are all of your clusters complete? or do you have some nice pickup fuel gauges seperate? I still have a power steering setup at your place yet? Thanks, Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

02-24-2009, 10:20 PM	#28
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	Re: Updated thread on parts that are left Randy, The mirrors #4 and #5..can you tell me how far apart the bottom braces are apart from each other....from center of hole to center of hole? __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

02-24-2009, 10:44 PM	#29
BluTrukker BOHICA Join Date: Mar 2008 Location: Stewartville, MN Posts: 440	Re: Updated thread on parts that are left What does "3) all chrome pile $30 NO SHIP" consist of? __________________ Trying to save someone from their own stupidity is like teaching a pig to dance. It is a waste of your time, and it annoys the pig!

02-24-2009, 11:27 PM	#30
zeusflash Senior Member Join Date: Feb 2005 Location: Post Falls,Idaho Posts: 691	Re: Updated thread on parts that are left Hi Randy, Need a total for 1 diverter and the A/C battery box to 83854, Thanks. __________________ '69 3/4 ton 427 CST Pickup '71 CST Blazer '72 GMC 3/4 4x4

02-24-2009, 11:30 PM	#31
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Updated thread on parts that are left rockc, sorry no they are not 2 1/2 themeskin, Rick, the speaker bracket set for 410 consists of the one on the left, one of the middle ones and one of the ones on the right. I have one other middle and 4 other of the ones on the right for $5 each toomuchstuff, Eric, do you want me to get a shipping price or jsut set it back with the 67 PS setup? Sorry all the gauges are complete Blazerman, Rob, I'll get a measurement hopefully Wed after work blu Trukker, its just some chrome off 69-72 trucks that I've parted, I can see whats all there and get a pic for you, it would have to be picked up, no shipping. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-24-2009, 11:32 PM	#32
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Updated thread on parts that are left Zeusflash, sorry I must of been replying when you posted. I'll get a quote either Wed after work if not for sure Thurs after work. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-25-2009, 12:06 AM	#33
yellowGT Registered User Join Date: Jan 2006 Location: Garland, TX Posts: 970	Re: Updated thread on parts that are left randy in that pile of bumpers I see a bumper without the holes for the lights. Do you have a pic of that one and what condition is it in? shipping to 75040? __________________ '84 swb chevy '69 swb chevy '68 swb chevy '95 Impala ss-sold '89 chevy crew cab dually 3+3

02-25-2009, 12:07 AM	#34
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Updated thread on parts that are left I'll get it pulled out and a pic of it either Wed after work or Thurs after work. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-25-2009, 12:10 AM	#35
yellowGT Registered User Join Date: Jan 2006 Location: Garland, TX Posts: 970	Re: Updated thread on parts that are left And how much for a good gauge cluster for 69 __________________ '84 swb chevy '69 swb chevy '68 swb chevy '95 Impala ss-sold '89 chevy crew cab dually 3+3

02-25-2009, 12:23 AM	#36
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Updated thread on parts that are left The gauge clusters I have the bezels are not the best shape, some cracks, some chipped paint, some wear. I get $20 plus shipping for a complete setup with a good circuit board and bad bezel. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-25-2009, 12:43 AM	#37
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,769	Re: Updated thread on parts that are left Randy, go ahead and give me a total to 55744 when you have a chance. Try to save the original packaging if you can. Any other nos parts? Thanks. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

02-25-2009, 12:46 AM	#38
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Updated thread on parts that are left Eric, I'll get you a quote, I'll put it in PVC to protect it. This is the last piece of NOS I have, I wish I had more. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-25-2009, 02:38 AM	#40
weircc Registered User Join Date: Dec 2008 Location: richmond, MO Posts: 794	Re: Updated thread on parts that are left i just bought some rear taillight housings from you couple weeks ago and guess what im back. i need a 67-68 bowtie grill emblem it can be trashed i just need it to practice my mod on before i cut my new one up also i need one rear brake line clip the one that holds rubber line to frame or rear end shipped to richmond mo 64085 let me know the total. BTW GUYS THIS GUY IS LEGIT THANKS

02-25-2009, 09:25 AM	#41
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Updated thread on parts that are left Montess454, sorry no tachs. I'll pm you a total on a gauge cluster weircc, sorry no 67-68 emblems right now and also no clips, I don't have any trucks here that I'm parting or I'd get one for you. THANKS for the kind words, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

02-25-2009, 11:15 AM	#42
themeskin Registered User Join Date: Feb 2009 Location: el paso tx Posts: 125	Re: Updated thread on parts that are left hi randy ill take the jack swivel handle/ both wpier arms w blades/ and a set of the speaker brackets . the ones that contain 3 brackets middle , right, left can u send me the best of speaker brackets u can find thanks randy shipping 2 79907

02-25-2009, 12:08 PM	#43
1970cstblazer All stock and staying that way Join Date: Jul 2003 Location: Elkland, PA Posts: 1,690	Re: Updated thread on parts that are left I am interested in the pass side bed splash pan $10 Plus the ride to ZIP 14830. __________________ 1970 K/5 Blazer CST 4WD, Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion.. 1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels Last edited by 1970cstblazer; 02-25-2009 at 12:08 PM.

02-25-2009, 05:42 PM	#44
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Updated thread on parts that are left pic for Zeusflash Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-25-2009, 05:59 PM	#45
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Updated thread on parts that are left yellowgt, bumper is for a gmc, has a dent in it too. Gauge setup shipped would be $35, Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-25-2009, 07:47 PM	#46
1970cstblazer All stock and staying that way Join Date: Jul 2003 Location: Elkland, PA Posts: 1,690	Re: Updated thread on parts that are left Thanks Randy! __________________ 1970 K/5 Blazer CST 4WD, Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion.. 1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels

02-26-2009, 12:01 AM	#47
lil blue Registered User Join Date: Dec 2008 Location: orlando fl Posts: 203	Re: Updated thread on parts that are left Hey I was wondering do u have any clusters with a choke and no tach. Also do any of them have chrome thanks

02-26-2009, 12:51 AM	#49
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Updated thread on parts that are left 1970cstblazer, I'll get it out to you Fri. Thanks lil blue, no tachs in any of them, I'm sure some of them have choke holes with light switch and wipers on the left, I'll check Thurs, the bezels are worn with some cracks. $38 shipped for a gauge setup. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 02-26-2009 at 12:51 AM.

02-26-2009, 02:10 AM	#50
yellowGT Registered User Join Date: Jan 2006 Location: Garland, TX Posts: 970	Re: Updated thread on parts that are left thanks Randy.... i will have to pass on bumper __________________ '84 swb chevy '69 swb chevy '68 swb chevy '95 Impala ss-sold '89 chevy crew cab dually 3+3

Register or Log In To remove these advertisements.