Vintage Air Sale - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Scottshotrods · 01-15-2011, 02:05 PM

Quote:

Originally Posted by solidaxel

Justin,

I need a quote on the Evap, wire harness, controls and duct hose only for the 51 chevy pick up.

Thanks
Bob

P/m sent
Justin

solidaxel · 01-15-2011, 02:30 PM

Quote:

Originally Posted by Scottshotrods

P/m sent
Justin

Just those pieces only, I am hiding the controls in the glove box, so the standard one, and I have ducts, just need the hose..

Scottshotrods · 01-15-2011, 04:05 PM

Quote:

Originally Posted by solidaxel

Just those pieces only, I am hiding the controls in the glove box, so the standard one, and I have ducts, just need the hose..

Will have some prices on monday to you Bob.
Justin

85burb · 01-16-2011, 11:41 PM

Do you make one for a 85 burb that replaces all the factory crap under dash? I will have the comp and brackets for my ls swap already. My factory one is junk and needs to be replaced.

Scottshotrods · 01-18-2011, 04:29 PM

Quote:

Originally Posted by solidaxel

Just those pieces only, I am hiding the controls in the glove box, so the standard one, and I have ducts, just need the hose..

p/m sent
Justin

riberno · 07-12-2012, 04:43 AM

We are offering a Forum Only Special pricing with free shipping on all Vintage Air Kits Including the Chevy Truck Sure Fit ...

SunSoaked · 08-06-2012, 12:07 PM

I need a serpantine pulley for my new 508 compressor. Where can I get just the pulley since VA wont sell it individually.

Thanks, Mike

Scottshotrods · 08-07-2012, 08:30 PM

Quote:

Originally Posted by SunSoaked

I need a serpantine pulley for my new 508 compressor. Where can I get just the pulley since VA wont sell it individually.

Thanks, Mike

Here is a place I found for you alibaba.com

Justin

VA72C10 · 08-07-2012, 08:37 PM

Quote:

Originally Posted by SunSoaked

I need a serpantine pulley for my new 508 compressor. Where can I get just the pulley since VA wont sell it individually.

Thanks, Mike

Since they don't have it, I have a New in box Vintage Air serpentine clutch assembly. Part# 05511-VUA Listed for 150. Will take 90 shipped.

shenk10 · 01-18-2011, 05:28 PM

Could I please get some information and pricing for a kit that is for an '82 C10 without original a/c, but I am doing a 6.0 swap so I wouldnt need the compressor...I really haven't thought about it that much so an estimate would just be fine. Thanks

Scottshotrods · 01-18-2011, 06:40 PM

Quote:

Originally Posted by shenk10

Could I please get some information and pricing for a kit that is for an '82 C10 without original a/c, but I am doing a 6.0 swap so I wouldnt need the compressor...I really haven't thought about it that much so an estimate would just be fine. Thanks

P/m sent
justin

Scottshotrods · 01-21-2011, 02:52 PM

Quote:

Originally Posted by shenk10

Could I please get some information and pricing for a kit that is for an '82 C10 without original a/c, but I am doing a 6.0 swap so I wouldnt need the compressor...I really haven't thought about it that much so an estimate would just be fine. Thanks

p/m sent
Justin

Fesser · 01-18-2011, 07:45 PM

Could I get a quote for a system that would go into a 70 blazer that has stock A/C vents, tubes, and ac/heater controls. I don't need a compressor because my engine, a 93 350 has a good stock one on it. I would need hoses and adaptors for that if you have them. No condensor or drier on the truck. Frank

**jocko** · 01-19-2011, 10:58 PM

Justin and Jon,
Saw an earlier post requesting what different kits or options are available for a 66 C10. I'm interested in the same - and, unfortunately, I need the whole enchilada... I'm going from no air to air. I do have some compressor brackets, but whether or not they will work depends on which kind of compressor I end up with. (my current setup is the middle-of-the road thrift heater, so I've got the big box in the engine compartment (which I really want to have removed in this process) and the single pull and turn know control on the dash) Haven't decided yet if I'd prefer the nice chrome underdash unit or a (Gen IV?) full custom fit set-up. Interested in cost/process for those 2 approaches. (also, is the Gen IV a sure fit for a 66 or was it designed to fit 67-72 and "kinda" fits a 66? Just curious. Thanks for your help.
jocko

Scottshotrods · 01-21-2011, 02:58 PM

Quote:

Originally Posted by jocko

Justin and Jon,
Saw an earlier post requesting what different kits or options are available for a 66 C10. I'm interested in the same - and, unfortunately, I need the whole enchilada... I'm going from no air to air. I do have some compressor brackets, but whether or not they will work depends on which kind of compressor I end up with. (my current setup is the middle-of-the road thrust heater, so I've got the big box in the engine compartment (which I really want to have removed in this process) and the single pull and turn know control on the dash) Haven't decided yet if I'd prefer the nice chrome underdash unit or a (Gen IV?) full custom fit set-up. Interested in cost/process for those 2 approaches. (also, is the Gen IV a sure fit for a 66 or was it designed to fit 67-72 and "kinda" fits a 66? Just curious. Thanks for your help.
jocko

p/m sent
Justin

Scottshotrods · 01-21-2011, 02:56 PM

Quote:

Originally Posted by Fesser

Could I get a quote for a system that would go into a 70 blazer that has stock A/C vents, tubes, and ac/heater controls. I don't need a compressor because my engine, a 93 350 has a good stock one on it. I would need hoses and adaptors for that if you have them. No condensor or drier on the truck. Frank

p/m sent
Justin

71meangreenc10 · 01-19-2011, 11:13 PM

Can you send me a quote for a 71 ac cab complete setup?

Thanks.

Smitty

bigguy · 01-20-2011, 09:44 PM

pricing for an 86 c10 with factory air. I have an LS swap and don't need the compressor either.

greystoke · 01-21-2011, 12:00 AM

could i get a price quote for a gen 4 system, compressor, condensor, lines and accumulator for a 69 chev truck

Scottshotrods · 01-21-2011, 03:10 PM

Quote:

Originally Posted by greystoke

could i get a price quote for a gen 4 system, compressor, condensor, lines and accumulator for a 69 chev truck

p/m sent
Justin

Scottshotrods · 01-21-2011, 03:05 PM

Quote:

Originally Posted by bigguy

pricing for an 86 c10 with factory air. I have an LS swap and don't need the compressor either.

p/m sent
justin

Scottshotrods · 01-21-2011, 03:01 PM

Quote:

Originally Posted by 71meangreenc10

Can you send me a quote for a 71 ac cab complete setup?

Thanks.

Smitty

p/m sent
Justin

Scottshotrods · 01-21-2011, 01:34 AM

Will have all ac quates to you guys on friday for sure.
Justin

tech@scottshotrods · 01-21-2011, 05:10 PM

guys we are offering a percentage discount and free shipping Justin decided to do a deeper deal but charge a discounted shipping cost which equals out to be a better savings than I was offering for you guys

CHP c-10 · 01-22-2011, 12:20 PM

Hey Justin,
sent a pm also...
(68 c-10 non ac cab, with 5.3l donor and compressor going in. Would like a price for the remaining bits, stock looking control panel (if avail). Availability? Are there vent options-add on under dash or nice looking vents in the dash?
Thanks,
Jonathan

01-16-2011, 11:41 PM	#4
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	Re: Vintage Air Sale Do you make one for a 85 burb that replaces all the factory crap under dash? I will have the comp and brackets for my ls swap already. My factory one is junk and needs to be replaced. __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

07-12-2012, 04:43 AM	#6
riberno Registered User Join Date: Mar 2012 Location: New york, NY Posts: 1	Re: Vintage Air Sale We are offering a Forum Only Special pricing with free shipping on all Vintage Air Kits Including the Chevy Truck Sure Fit ... __________________ Wise Food Storage Coupons Code

08-06-2012, 12:07 PM	#7
SunSoaked Registered User Join Date: Dec 2011 Location: Yuma Arizona Posts: 1,525	Re: Vintage Air Sale I need a serpantine pulley for my new 508 compressor. Where can I get just the pulley since VA wont sell it individually. Thanks, Mike

01-18-2011, 05:28 PM	#10
shenk10 Registered User Join Date: Feb 2009 Location: New Park, PA Posts: 312	Re: Vintage Air Sale Could I please get some information and pricing for a kit that is for an '82 C10 without original a/c, but I am doing a 6.0 swap so I wouldnt need the compressor...I really haven't thought about it that much so an estimate would just be fine. Thanks __________________ Jordan 1972 Chevy K5 Blazer, 6" Lift, 35x13.5R15, 6.0/6L80E/NP205 1982 Chevy C10 SWB, 2006 LS2/4l70e In progress.... http://67-72chevytrucks.com/vboard/s...d.php?t=439860

01-18-2011, 07:45 PM	#13
Fesser Registered User Join Date: Feb 2010 Location: Napa, CA Posts: 519	Re: Vintage Air Sale Could I get a quote for a system that would go into a 70 blazer that has stock A/C vents, tubes, and ac/heater controls. I don't need a compressor because my engine, a 93 350 has a good stock one on it. I would need hoses and adaptors for that if you have them. No condensor or drier on the truck. Frank

01-19-2011, 10:58 PM	#14
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,976	Re: Vintage Air Sale Justin and Jon, Saw an earlier post requesting what different kits or options are available for a 66 C10. I'm interested in the same - and, unfortunately, I need the whole enchilada... I'm going from no air to air. I do have some compressor brackets, but whether or not they will work depends on which kind of compressor I end up with. (my current setup is the middle-of-the road thrift heater, so I've got the big box in the engine compartment (which I really want to have removed in this process) and the single pull and turn know control on the dash) Haven't decided yet if I'd prefer the nice chrome underdash unit or a (Gen IV?) full custom fit set-up. Interested in cost/process for those 2 approaches. (also, is the Gen IV a sure fit for a 66 or was it designed to fit 67-72 and "kinda" fits a 66? Just curious. Thanks for your help. jocko Last edited by jocko; 01-21-2011 at 06:24 PM.

01-19-2011, 11:13 PM	#17
71meangreenc10 Its a Truck Thing...... Join Date: Dec 2004 Location: Sierra Vista, Arizona Posts: 3,179	Re: Vintage Air Sale Can you send me a quote for a 71 ac cab complete setup? Thanks. Smitty __________________ 71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 69 C30 Former Motor Home, Flat Bed time 70 G20 Red-E-Kamp Conversion "I'm your Boogy Van"

01-20-2011, 09:44 PM	#18
bigguy Registered User Join Date: Jun 2010 Location: Northern VA Posts: 89	Re: Vintage Air Sale pricing for an 86 c10 with factory air. I have an LS swap and don't need the compressor either.

01-21-2011, 12:00 AM	#19
greystoke Registered User Join Date: Jul 2008 Location: Buckeye, Arizona Posts: 694	Re: Vintage Air Sale could i get a price quote for a gen 4 system, compressor, condensor, lines and accumulator for a 69 chev truck __________________ "Fear makes the wolf look bigger" http://67-72chevytrucks.com/vboard/s...d.php?t=305629 Last edited by greystoke; 01-21-2011 at 12:00 AM.

01-21-2011, 01:34 AM	#23
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: Vintage Air Sale Will have all ac quates to you guys on friday for sure. Justin

01-21-2011, 05:10 PM	#24
tech@scottshotrods Registered User Join Date: Nov 2010 Location: california Posts: 631	Re: Vintage Air Sale guys we are offering a percentage discount and free shipping Justin decided to do a deeper deal but charge a discounted shipping cost which equals out to be a better savings than I was offering for you guys

01-22-2011, 12:20 PM	#25
CHP c-10 Registered User Join Date: Jul 2010 Location: Napa, CA Posts: 34	Re: Vintage Air Sale Hey Justin, sent a pm also... (68 c-10 non ac cab, with 5.3l donor and compressor going in. Would like a price for the remaining bits, stock looking control panel (if avail). Availability? Are there vent options-add on under dash or nice looking vents in the dash? Thanks, Jonathan



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.