|
05-02-2021, 12:05 AM | #1 | |
Senior Member
Join Date: Dec 2014
Location: Edmonton Alberta
Posts: 1,383
|
Re: 1968 C20 Build
Quote:
__________________
DAVE Edmonton, Alberta 1959 Apache 1967 K20 1968 C20 1970 C10 1972 GMC 2500 1981 C10 |
|
07-10-2021, 01:24 AM | #2 |
Registered User
Join Date: Oct 2009
Location: Denton, Texas
Posts: 1,729
|
Re: 1968 C20 Build
subscribed.
I also have a 1968 C20, but mine is an anniversary 50th custom camper. Originally came with a 327 and 4 speed transmission. 327 is long gone and a 1972 350 resides in the engine compartment. I clinked on your link of your build thread from your posting about restoring your hubcaps. |
07-10-2021, 10:17 AM | #3 | |
Senior Member
Join Date: Dec 2014
Location: Edmonton Alberta
Posts: 1,383
|
Re: 1968 C20 Build
Quote:
__________________
DAVE Edmonton, Alberta 1959 Apache 1967 K20 1968 C20 1970 C10 1972 GMC 2500 1981 C10 |
|
03-31-2022, 04:09 PM | #4 |
Senior Member
Join Date: Dec 2014
Location: Edmonton Alberta
Posts: 1,383
|
Re: 1968 C20 Build
It's been awhile, I have a couple updates.
First of all when I discovered that the rims I had blasted and painted had no hubcap nubs I was kind of bummed out until I realized that those would look good on my 72 GMC, which I was going to outfit with conversion nuts and modern hub covers. So that is what I did. They are now satin black and awaiting the modern touch. A friend of a friend who was restoring a 70s Ford supplied the below rims, which do have provisions for hub covers. Blasted and powdercoated an "antique" white color, they look pretty sharp. In fact I get thirsty because it is like looking into a bowl of milk. I have some driver quality 69-72 hubcaps for these, but after all this fooforah I might go with conversion lugs nuts on this one, too. I have a set, anyway. We will see. I also pulled my new Firestones off of this truck and put it on the 72 since that one is already a driver.
__________________
DAVE Edmonton, Alberta 1959 Apache 1967 K20 1968 C20 1970 C10 1972 GMC 2500 1981 C10 |
04-08-2022, 12:33 AM | #5 |
Senior Member
Join Date: Mar 2016
Location: Near Canon City ,Colorado
Posts: 4,001
|
Re: 1968 C20 Build
I bought a truck that had been parked for awhile and had the cowl full of debris. Not good. I just glad it hadn't got a lot of moisture in the mix .
__________________
'35 1/2 ton Pickup (bought 2020) '68 C10 Suburban (bought 2021) '72 K5 Blazer (bought 2013) '67 Stepside (bought 1997-sold 2021) '96 Bronco Eddie Bauer (inherited 2010) My 1st day here-'67 C10(sold)and '72 K5 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=702056 "Another Blue Chevy"(1935) http://67-72chevytrucks.com/vboard/s...d.php?t=799203 MIKE
|
04-24-2022, 11:18 AM | #6 |
Registered User
Join Date: Jan 2003
Location: Safford,AZ
Posts: 3,612
|
Re: 1968 C20 Build
Nice progress.
|
05-03-2022, 07:09 PM | #7 |
Senior Member
Join Date: Dec 2014
Location: Edmonton Alberta
Posts: 1,383
|
Re: 1968 C20 Build
I had a fun Saturday, I removed the rad support - it needs some metal repair where it sat under the battery - as well as a broken body mount. Oh and a flimsy crossmember thing as well, it was under the rad, looks like someone tried to tow the truck with it and ripped it half off.
For the body mount I used a grinder to get at what I could, and then when it was pretty hot, an air chisel. Worked great. I have a new one arriving (along with a whole bunch of parts for this build) sometime hopefully this week. Of course, as soon as I ordered a new one a used one showed up on the parts board, that seems to happen to me often.
__________________
DAVE Edmonton, Alberta 1959 Apache 1967 K20 1968 C20 1970 C10 1972 GMC 2500 1981 C10 |
06-20-2022, 04:08 PM | #8 |
Registered User
Join Date: Sep 2011
Location: Ark City, Kansas
Posts: 3,361
|
Re: 1968 C20 Build
2 words..............
Oh boy!!! |
11-30-2023, 12:17 AM | #9 |
Senior Member
Join Date: Dec 2014
Location: Edmonton Alberta
Posts: 1,383
|
Re: 1968 C20 Build
I haven’t gotten much done over the summer but now it’s winter and am getting back at it. I have dry fitted inner and outer rockers as well as cab corners and am ready to try to make them permanent. I don’t really know what I’m doing but I’m willing to try. This is the truck I will learn on so I expect to make lots of mistakes.
__________________
DAVE Edmonton, Alberta 1959 Apache 1967 K20 1968 C20 1970 C10 1972 GMC 2500 1981 C10 |
06-09-2024, 12:11 PM | #10 |
Senior Member
Join Date: Dec 2014
Location: Edmonton Alberta
Posts: 1,383
|
Re: 1968 C20 Build
Been making some progress, lately. All inner and outer rockers, cab supports, cab corners are welded in. I am not a very good welder, but I am learning, I think.
I also have the body mounts in, but left them loose for now. I have read that the position of these cabs are pretty adjustable and that it is possible to have them bolted in too far to either side if you are not careful, so I will wait to tighten them up. Working on one of the fenders, now. I also have the box pulled back another foot and am going to test out some paint colors to see what works. I have this one shade of blue that I really like but it only comes in a gloss. I don't think my bodywork skills extend further than a satin finish.
__________________
DAVE Edmonton, Alberta 1959 Apache 1967 K20 1968 C20 1970 C10 1972 GMC 2500 1981 C10 |
06-09-2024, 06:31 PM | #11 |
Senior Member
Join Date: Aug 2004
Location: Centennial, CO
Posts: 2,972
|
Re: 1968 C20 Build
It looks good and solid. It’s nice to have that part done.
You don’t have to be a great welder if you’re a good grinder
__________________
ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ |
06-10-2024, 11:00 AM | #12 |
Senior Member
Join Date: Dec 2014
Location: Edmonton Alberta
Posts: 1,383
|
Re: 1968 C20 Build
I am a world-class grinder at this point!
Definitely learning some things for when I do this to the next truck. It was originally the plan to glue the corners in with 3-M, but I thought what the heck I'll challenge myself.
__________________
DAVE Edmonton, Alberta 1959 Apache 1967 K20 1968 C20 1970 C10 1972 GMC 2500 1981 C10 |
06-12-2024, 02:25 PM | #13 |
Senior Member
Join Date: Dec 2014
Location: Edmonton Alberta
Posts: 1,383
|
Re: 1968 C20 Build
Here are some more pics, I just happened to have the exact right scrap wood to place between the rails. This rig was already nailed together and leaning against the corner of the shop, no assembly required. Forget what it was for but it now has "bed remover" written on it in Sharpie.
I first tried this from the side of the bed as I have seen others do, but I found that to be cumbersome as the hoist does not want to move sideways. When I positioned it behind the tailgate it worked better than expected despite the lack of reach: because all the junk I had in the bed allowed it to balance. The blue that I like is a Rustoleum/Tremclad color called Harbour Blue, but it only comes in a gloss finish. I know that I can get paint mixed up and put in cans, I just like the idea of an off the shelf color that I can get easily and is always exactly the same. I am also leaning toward French Blue, which does come in Satin. For the roof and the grill and the bumpers, Ivory Bisque.
__________________
DAVE Edmonton, Alberta 1959 Apache 1967 K20 1968 C20 1970 C10 1972 GMC 2500 1981 C10 |
06-15-2024, 03:54 PM | #14 |
Registered User
Join Date: Sep 2011
Location: Ark City, Kansas
Posts: 3,361
|
Re: 1968 C20 Build
Knowing how to weld sheet metal is a good thing. The skill will help down the road. I am learning, also...patience helps. There's a guy in Saskatchewan that I would call a metal artist. His Utube channel is called Carter Auto Restyling. You need to check it out. He gives instructions on all his videos, explaining the hows and whys of what he is doing. It is well worth checking out!!!
|
06-16-2024, 01:28 AM | #15 |
Senior Member
Join Date: Dec 2014
Location: Edmonton Alberta
Posts: 1,383
|
Re: 1968 C20 Build
I found that youtube account: I'm watching him fix a fender right now. Pretty interesting, I like how instead of pausing all the time to explain, he says that you should just watch him work. I also like his sense of humour: it is pretty, well, Canadian. Right now he is frustrated and mad at himself for a mistake he made and is saying he is going to give up welding because he is terrible at it, and that he will just put Bushwacker fender flares on the car, since that is what guys from Saskatchewan do with all their vehicles, even 1940 sedans. Sounds like me.
The big development which I think counts as an actual leap forward for this project: a friend of mine who has been a professional welder for 40+ years stopped by yesterday to show me a few things about welding. He's been looking at my work whenever he comes by, and he has up until now given me some general advice ("you should maybe learn how to weld"), but this time he actually gave me some coaching, set up my welder properly, and worked with me on some practice welds. What I really appreciated was him watching me operate the welder and making adjustments to the speed and heat while I ran a bead. He didn't tell me he would do this... I was wearing a mask and welding away and had my back to him while he did it: so the effect was like I suddenly had magical welding powers. I would start a bead and it would be terrible, but by the end it was puddling and penetrating like I'd never seen it. After a lot of practice and me watching him like a hawk, my welding improved with each attempt. When he left his parting advice was "get the thinnest wire you can and run that machine as hot as you can just shy of burning through". Seems obvious, I know. He would sometimes weld without a mask... "I just position the gun to block my view" he said. Well I won't be trying that. Unsurprisingly, I learned more from him in 20 minutes that I did on my own for the last two years. The next day on his advice I bought some regular mild steel welding wire and a can of C25, and reversed the polarity of the machine. So I am now welding with gas, which is helpful since I no longer have to clean up my welds before going over them. I thought that a set up like that was for experts, it is not, apparently. As an amateur I would recommend this, I go over my welds often. Anyway I am pretty pleased with today's welding. Not perfect but better than most I have done, and it took hardly any time. I am resisting the urge to redo some of my older, previous welds. Might take a quick look next weekend anyway. I decided to make patch panels to cover up the entire floor in the cab corners: that is, all the way into the cab corners. I have seen others do this and I think as long as I leave some drain holes and make sure the underside is correct it will be fine. In the area where my little floor patches meets the insides (contours) of the cab corner I plan to just tack it in place, and then seam seal. I want to quit while I am ahead with these cab corners, I don't want to burn through or warp them. And since these floor patches aren't factory I don't think it is against the rules. I've really learned a lot from this build: I can guarantee that there are a lot of things I will do differently next time.
__________________
DAVE Edmonton, Alberta 1959 Apache 1967 K20 1968 C20 1970 C10 1972 GMC 2500 1981 C10 |
06-24-2024, 10:40 PM | #16 | |
Registered User
Join Date: Dec 2018
Location: St. James, MN
Posts: 166
|
Re: 1968 C20 Build
Quote:
__________________
My 67: http://67-72chevytrucks.com/vboard/s...d.php?t=784468 |
|
08-18-2024, 10:24 AM | #17 |
Senior Member
Join Date: Jun 2002
Location: Murray, Kentucky
Posts: 3,528
|
Re: 1968 C20 Build
Nice work on this so far. As a self-taught welder I hate looking at projects I did when I first started! Good luck, Rg
__________________
Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 |
09-21-2024, 01:00 AM | #18 |
Senior Member
Join Date: Dec 2014
Location: Edmonton Alberta
Posts: 1,383
|
Re: 1968 C20 Build
I ended up tapping those two stripped hinge capture nuts to 7/16 fine thread. I was worried that whatever I was tapping in that pillar would be too thin for this upgrade, or too shallow. But it seems fine.
I bought a couple of bolts and washers for it, and was pleasantly surprised that my scheme worked. I dunno why but I just expected there to be another problem to deal with. Even better, the position I had the doors in was already perfect and they needed no adjustment. They close like a charm. I am officially turning a corner, sort of. From now on I will not remove anything from this truck: I will only put things back where they belong. This is important as I may be losing the lease on this place. I'll clean up that rust, I just was checking the fitment.
__________________
DAVE Edmonton, Alberta 1959 Apache 1967 K20 1968 C20 1970 C10 1972 GMC 2500 1981 C10 |
10-07-2024, 10:42 AM | #19 |
Senior Member
Join Date: Dec 2014
Location: Edmonton Alberta
Posts: 1,383
|
Re: 1968 C20 Build
A few body filler applications later and I think the cab corners look pretty good. Among other things I am a former housepainter, so applying filler and sanding over and over is kind of my thing.
I keep reminding myself that this is the truck I am learning on, and it isn't going to be perfect. But, these doors look pretty lousy. I am going to start working on them, but if a 507 Blue door comes up for sale somewhere, I sure would buy it. I also wire wheeled and rock guarded the underside of the floorboards. I will eventually do that for the entire underside, if I can get a hoist free.
__________________
DAVE Edmonton, Alberta 1959 Apache 1967 K20 1968 C20 1970 C10 1972 GMC 2500 1981 C10 |
Bookmarks |
|
|