The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board > projects and builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-04-2012, 11:25 PM   #26
DURG
Registered User
 
DURG's Avatar
 
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
Re: DURG's Black 65 C10

I just [popped out the six lug axles and have the Moser 5 lugs on the way as well as a Wilwood rear disc setup.







DURG is offline   Reply With Quote
Old 07-04-2012, 11:27 PM   #27
DURG
Registered User
 
DURG's Avatar
 
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
Re: DURG's Black 65 C10







Hopefully I will get the frame sandblasted in the next week or so. I can do it myself at home, it's just a matter of time and weather.
DURG is offline   Reply With Quote
Old 07-04-2012, 11:38 PM   #28
DURG
Registered User
 
DURG's Avatar
 
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
Re: DURG's Black 65 C10

I am impressed with the condition of this truck. Very few surprises during disassy. No more rust than I already knew about which is not much. All the hardware came apart nicely.

Stuff I either have ordered or already here:

Porterbuilt front touring coilover clip with tubular a-arms, sway bar, and Porterbuilt 4 link rear ordered. Nate already had the Ride Tech adjustible coilovers, Hyperco springs, Unisteer power rack drop shipped. I have the CPP modular spindles and I have ordered the Moser 5 lug axles and the Wilwood rear brake setup. I also have my Nitto 555 tires and am waiting on the Coy's C-5 wheels. 22" and 20" in the regular gray and machined.
DURG is offline   Reply With Quote
Old 07-04-2012, 11:45 PM   #29
198plus
Registered User
 
198plus's Avatar
 
Join Date: May 2009
Location: Loganville, Ga.
Posts: 1,408
Re: DURG's Black 65 C10

Very nice truck !!!!!
198plus is offline   Reply With Quote
Old 07-05-2012, 05:29 PM   #30
Leadfoot Lambert
Registered User
 
Leadfoot Lambert's Avatar
 
Join Date: Jan 2011
Location: Saco, Maine
Posts: 377
Re: DURG's Black 65 C10

Hey Durg, Were there any rubber pads between the bed rails and the frame when you took it apart? Also where did you find the high hump? Local?
__________________
65 Chevy short fleet 350 5 speed, soon to be LSX powered
65 F100 short fleet
91 Heritage softail
94 Fatboy
11 Softail Deluxe [wife's bike]
13 Streetglide
http://www.youtube.com/watch?v=yMFMw...eature=mh_lolz

Last edited by Leadfoot Lambert; 07-05-2012 at 05:36 PM.
Leadfoot Lambert is offline   Reply With Quote
Old 07-05-2012, 07:20 PM   #31
DURG
Registered User
 
DURG's Avatar
 
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
Re: DURG's Black 65 C10

No rubber pads. Metal to metal. The high hump is coming from Washington state. I am supposed to be getting the bolt in mating piece and the firewall that I believe comes out of a '62 with the Hydraglide style tranny. I got a couple high humps already but they are rusted and I was going to have to cut them up to make one decent one. I have the mating piece I cut out of the firewall which also needs a little work on the left side due to rust.
DURG is offline   Reply With Quote
Old 07-06-2012, 10:35 PM   #32
DURG
Registered User
 
DURG's Avatar
 
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
Re: DURG's Black 65 C10

Well i moved the old crossmember out back. I don't imagine there is much of a market for this stuff?



I needed to remove the truck arm mounts from the rear end tubes to make way for the new Porterbuilt 4 link mounts. Got that done and then blasted the housing nice and clean.





Blasted the frame today too. What a ***** in this heat!



DURG is offline   Reply With Quote
Old 07-07-2012, 01:23 PM   #33
DURG
Registered User
 
DURG's Avatar
 
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
Re: DURG's Black 65 C10

Fire last night in the fire pit with 47 year old genuine Chevrolet truck bed wood!

DURG is offline   Reply With Quote
Old 07-07-2012, 01:25 PM   #34
DURG
Registered User
 
DURG's Avatar
 
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
Re: DURG's Black 65 C10

Installed new bearings and seals and slid the Moser axles in so I could verify fitment of the Wilwood rear brake setup.



DURG is offline   Reply With Quote
Old 07-07-2012, 04:09 PM   #35
coulter
Registered User
 
coulter's Avatar
 
Join Date: Feb 2011
Location: muskogee, ok
Posts: 1,091
Re: DURG's Black 65 C10

looks like this is gonna be a sweet ass build!!!! great work so far keep it up
__________________

bagged 66 longbed build
http://67-72chevytrucks.com/vboard/s...d.php?t=449548

my favorite colors.. black, rust, and shiny!!!! instagram: @coulter918
coulter is offline   Reply With Quote
Old 07-07-2012, 07:05 PM   #36
DURG
Registered User
 
DURG's Avatar
 
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
Re: DURG's Black 65 C10

Quote:
Originally Posted by coulter View Post
looks like this is gonna be a sweet ass build!!!! great work so far keep it up
Thanks, I can't wait for the Porterbuilt stuff to show up.
DURG is offline   Reply With Quote
Old 07-07-2012, 07:10 PM   #37
Leadfoot Lambert
Registered User
 
Leadfoot Lambert's Avatar
 
Join Date: Jan 2011
Location: Saco, Maine
Posts: 377
Re: DURG's Black 65 C10

Hey Durg, What do you have for a sandblaster? Mine would have taken a month of Sundays to do a frame and rear end. I think I need to upgrade.
__________________
65 Chevy short fleet 350 5 speed, soon to be LSX powered
65 F100 short fleet
91 Heritage softail
94 Fatboy
11 Softail Deluxe [wife's bike]
13 Streetglide
http://www.youtube.com/watch?v=yMFMw...eature=mh_lolz
Leadfoot Lambert is offline   Reply With Quote
Old 07-07-2012, 07:25 PM   #38
chevyrestoguy
Registered User
 
chevyrestoguy's Avatar
 
Join Date: Mar 2005
Location: apple valley, ca
Posts: 2,670
Re: DURG's Black 65 C10

[QUOTE=DURG;5469513]

Anybody know why the grease pencil markings are always upside down from the factory?

Answer: Because the truck frames always came down the line upside down and the suspension components were lowered from above. The workers would ID the chassis with grease pencils for accountability. Right before the cab and frame were mated, they would flip the frame right-side up.

If this truck turns out half as nice as the '62 Impala, it's going to be amazing. I'll be tuning in for this build. You obviously have this stuff figured out.
__________________
Check out my latest endeavor:
https://roundsixpod.com

My build threads:
'55 Chevy: http://67-72chevytrucks.com/vboard/s...d.php?t=247512

'64 C-20: http://67-72chevytrucks.com/vboard/s...d.php?t=446527
chevyrestoguy is offline   Reply With Quote
Old 07-07-2012, 07:35 PM   #39
DURG
Registered User
 
DURG's Avatar
 
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
Re: DURG's Black 65 C10

[quote=chevyrestoguy;5473905]
Quote:
Originally Posted by DURG View Post


Anybody know why the grease pencil markings are always upside down from the factory?

Answer: Because the truck frames always came down the line upside down and the suspension components were lowered from above. The workers would ID the chassis with grease pencils for accountability. Right before the cab and frame were mated, they would flip the frame right-side up.

If this truck turns out half as nice as the '62 Impala, it's going to be amazing. I'll be tuning in for this build. You obviously have this stuff figured out.
I try. I built and raced circle track cars for 15 years and won a few championships at local 1/3 mile race tracks. That taught me about attention to detail and reliability, as well as learning fabrication skills as well. I am also in the Nuclear Quality control arena as for work. These trucks are completely new to me though.
DURG is offline   Reply With Quote
Old 07-07-2012, 07:38 PM   #40
DURG
Registered User
 
DURG's Avatar
 
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
Re: DURG's Black 65 C10

Quote:
Originally Posted by Leadfoot Lambert View Post
Hey Durg, What do you have for a sandblaster? Mine would have taken a month of Sundays to do a frame and rear end. I think I need to upgrade.
My sand blaster is a pressure unit TIP 99'er that holds about 50 pounds of abrasive, run by an 80 gallon compressor that still needs a rest during blasting to catch up. I have always used fine grade abrasive and the current stuff is actually crushed glass that I get at crown paint. ( now Moody's I guess). No matter how you look at it, sand blasting is not fun.
DURG is offline   Reply With Quote
Old 07-08-2012, 09:08 PM   #41
northern 85
Registered User
 
northern 85's Avatar
 
Join Date: Mar 2005
Location: Fairfield Maine
Posts: 1,759
Re: DURG's Black 65 C10

Welcome aboard, you will love this place! Great job on everything
northern 85 is offline   Reply With Quote
Old 07-12-2012, 05:03 AM   #42
northern 85
Registered User
 
northern 85's Avatar
 
Join Date: Mar 2005
Location: Fairfield Maine
Posts: 1,759
Re: DURG's Black 65 C10

Please keep the pics coming,cant wait to see this one compleated!
northern 85 is offline   Reply With Quote
Old 07-12-2012, 12:06 PM   #43
PBFAB.COM
Senior Member
 
PBFAB.COM's Avatar
 
Join Date: Dec 2003
Location: Mesa,Az
Posts: 3,981
Re: DURG's Black 65 C10

Truck's coming along nicely Durg!
__________________
www.PorterbuiltFabrication.com

Phone: 480-297-2621

E-mail: sales@pbfab.com


Find us on FaceBook under Porterbuilt Fabrication

Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck.

We offer components from the following manufacturers:

Porterbuilt
Accuair
Ridetech (Air Ride Technologies)
Air Lift
Wilwood
Intro
Unisteer
ECE
Gotta Show
Air Lift
Borgeson
CPP


Supporting this forum since 2003!
PBFAB.COM is offline   Reply With Quote
Old 07-12-2012, 05:48 PM   #44
CRGRS 66
Registered User
 
CRGRS 66's Avatar
 
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
Re: DURG's Black 65 C10

Awesome looking truck! Following along!
__________________
Craigerrr

My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709
CRGRS 66 is offline   Reply With Quote
Old 07-13-2012, 11:20 PM   #45
DURG
Registered User
 
DURG's Avatar
 
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
Re: DURG's Black 65 C10

I have had some trouble with clutch in my Impala so I was working on it today instead of the truck. I have smoked two clutches in it already this year. I ended up going with a McLeod RST twin disc clutch good for 800 H.P. after a proper break-in which the tech guy said was 12-15 hundred clutch cycles (basically everytime you shift or take off is a cycle) I got a little over 3 hundred cycles on it this afternoon when I took it out for a ride. Here are the install pictures for anyone interested in this type of clutch:















It basically has a disc against the flywheel and another that rides on the intermediate plate. The pressure plate mounts to a ring that is mounted onto the flywheel where the clutch would normally bolt up. No chatter on takeoff and it shifts fine also.
DURG is offline   Reply With Quote
Old 07-14-2012, 12:59 AM   #46
CRGRS 66
Registered User
 
CRGRS 66's Avatar
 
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
Re: DURG's Black 65 C10

Quote:
Originally Posted by DURG View Post
Fire last night in the fire pit with 47 year old genuine Chevrolet truck bed wood!

That actually makes me a little sad
__________________
Craigerrr

My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709
CRGRS 66 is offline   Reply With Quote
Old 07-17-2012, 08:31 PM   #47
DURG
Registered User
 
DURG's Avatar
 
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
Re: DURG's Black 65 C10

Impala is back together and running great so I was puttering around with some truck parts today. I found my Energy Suspension body bushings come with the wrong size rear bolts and then found out my big front brake kit from CPP came with the wrong caliper brackets. CPP was great and will ship a new set of brackets out ASAP no charge and Energy Suspension is checking into the bolt issue. I got outrageous powdercoating estimates for my Porterbuilt a-arms, panhard bar, and four link tubes so they will be getting painted. Some of the powdercoating costs I have seen quoted on the forums are amazingly cheap especially in Texas! I have a guy in Texas that has chrome plated some of my Impala parts damn near as cheap as the New England powder guys will do coating.
DURG is offline   Reply With Quote
Old 07-18-2012, 12:57 PM   #48
DURG
Registered User
 
DURG's Avatar
 
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
Re: DURG's Black 65 C10

Today I packed the bearings and installed the aluminum hubs on my CPP modular spindles. Then I went to put on the 13" rotors on just see what they would look like and found out they sent me 4-3/4" bolt pattern rotors. Calling CPP now to try and get that straightened out.



DURG is offline   Reply With Quote
Old 07-18-2012, 01:11 PM   #49
wheel1968
Registered User
 
Join Date: Feb 2011
Location: center point iowa
Posts: 14
Cool Re: DURG's Black 65 C10

hey i could use the rear brackets you so neatly took out of ur frame in the back ! still have them ? btw sweeeeet truck
wheel1968 is offline   Reply With Quote
Old 08-01-2012, 08:33 PM   #50
DURG
Registered User
 
DURG's Avatar
 
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
Re: DURG's Black 65 C10

Here's the Porterbuilt order sitting at Nate's shop nearly ready to ship!

DURG is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:50 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com