IN Complete rolling body and frame 71 Custom Deluxe Part out - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HeavyMetalChevy · 10-19-2011, 12:36 AM

Quote:

Originally Posted by brn agn

If the other guys pass, I would be interested in prices on the power steering pump and reservoir, engine stands and all the factory exhaust hangers. Thanks.

brn again...I will let the power steering package go for 175...The motor mounts like I stated are $100 all day easy...And I will blast them FREE!!! if you need the steering gearbox too It will be a complete set and I will throw it in cheap...If you buy both the power steering setup and engine stands...I will knock off 25% and do both for 250 and if you would want to go all out and get the steering box too I will do it all for around 350 shippedonce I get weights... Dude if you know these big block parts and prices THAT IS A STEAL!!!! might even through in some extras too :-P...

I have lots and lots and lots...Anything special you need...random small things...Box deal.. I throw it in...odds and ends that can always be used....
YE YEP.

Duane

HeavyMetalChevy · 10-22-2011, 01:38 AM

New parts breakdown and pricing Need something ask...

Door Panels-sold
AC Non cut dash-sale pending
Power Steering setup and steering box-sold
Front bumper with nice lens and housings-trade pending
Outer Grille-sold
Door hinges and strikers-sold

HeavyMetalChevy · 10-20-2011, 01:23 AM

emblems are going to new thread... reply there please

webfoot · 10-18-2011, 02:22 PM

How much for the lighter element only (no socket or bezel needed) and the wire that runs off the back to the fuse box? 97838

HeavyMetalChevy · 10-19-2011, 06:59 PM

Quote:

Originally Posted by webfoot

How much for the lighter element only (no socket or bezel needed) and the wire that runs off the back to the fuse box? 97838

20 bucks sound good? let me know

coops714x4 · 10-18-2011, 03:03 PM

how much for the outer grill shipped to 73018, Thanks Coop

HeavyMetalChevy · 10-18-2011, 03:47 PM

Quote:

Originally Posted by coops714x4

how much for the outer grill shipped to 73018, Thanks Coop

Coop...I really dont want to separate the grille but if need be I will... There is a small ding on the pass side if you did not notice...Also I want to have it repaired first or is that what you plan on doing??? Let me know and I will give price.. Like I said though...Would rather sell whole...

coops714x4 · 10-18-2011, 04:22 PM

Ok how much for the whole thing Ill do the repair shipped to 73018

HeavyMetalChevy · 10-19-2011, 12:15 AM

Quote:

Originally Posted by coops714x4

Ok how much for the whole thing Ill do the repair shipped to 73018

Greyhound says $52.75 to Norman because I believe that is the closest staion to you. That was at 5lbs. too.. .It the damn length of 75".. imma check UPS account real quick like

coops714x4 · 10-19-2011, 12:54 AM

Quote:

Originally Posted by HeavyMetalChevy

Greyhound says $52.75 to Norman because I believe that is the closest staion to you. That was at 5lbs. too.. .It the damn length of 75".. imma check UPS account real quick like

you can ship to chickasha 73018 via greyhound . how much do you want for the grill

HeavyMetalChevy · 10-19-2011, 02:08 AM

Quote:

Originally Posted by coops714x4

you can ship to chickasha 73018 via greyhound . how much do you want for the grill

Coop...here are some more pics...I am still going to buff this thing and you can tell by the by the pics it does not need much.. Also everything is included.. That emblem is excellent... the inner grill is excellent...the bezels are excellent...both grille supports are included...Center one too if need be. One minor flaw to be straightened and this thing is NOS condition. The only thing it needs for show is black touched up around bezel area... It is hard to decide without seeming greedy but I am really just trying to fell you out...What kind of resto is this for is what it boils down to...Here are some pics of the inner

**burb71** · 10-18-2011, 05:28 PM

Duane I got the pics of the exhaust brackets you sent, but I need the whole set up not just the rubber part n clip. I also want the little part thats rivets to the frame.
Can you post pics from this Big block truck the way they look still mounted on the truck

HeavyMetalChevy · 10-18-2011, 09:10 PM

Quote:

Originally Posted by burb71

Duane I got the pics of the exhaust brackets you sent, but I need the whole set up not just the rubber part n clip. I also want the little part thats rivets to the frame.
Can you post pics from this Big block truck the way they look still mounted on the truck

Can you send me pics of what they look like..I thought the rubbers just bolted to frame... I will take pics yeas of course because the 71 I just got also has them

cdp · 10-18-2011, 08:35 PM

Hi, what's the shape of rear cab mouldings at two tone line? and if they are straight price shipped to 44305 Thanks Chris

HeavyMetalChevy · 10-19-2011, 12:27 AM

Quote:

Originally Posted by cdp

Hi, what's the shape of rear cab mouldings at two tone line? and if they are straight price shipped to 44305 Thanks Chris

Chris the rear cab molding is Immaculate!!! Detailed pics tomorrow and shipping quote early morning...

Thanks, Duane

guitardude127 · 10-19-2011, 12:38 AM

I'd be interested in the driver side door, passenger front fender, passenger inner fender, battery tray, and core support. Are all these in usable condition?

HeavyMetalChevy · 10-19-2011, 12:52 AM

Quote:

Originally Posted by guitardude127

I'd be interested in the driver side door, passenger front fender, passenger inner fender, battery tray, and core support. Are all these in usable condition?

someone who knows what they want and wht they are looking at...All are def. usable...pass inner fender is solid!!! batery tray is solid...pas front fender is solid... CORE SUPPORT IS EXCELLENT and you do realize it is for ac setup and 4 core rad. The driver side door I have to look at...If not I have a nice really solid blue door... Let me clarify though...when you say "usable condition " you meaning thay are solid and structurally sound or like you trying to color match with a green body you already have? Let me know...like my motto ask any question s and "help me...help you...

Thanks...and if you are buying all those parts you will def. receive a generous discount of course!!!!

Critterman71 · 10-19-2011, 06:59 AM

When you get to it I am interested in the dash assembly (metal) if it can be taken out at the spot welds under the windshield instead of cutting it out. I need one as mine is cut for the radio and has many extra holes drilled in it all over. I am in no hurry and will wait until it can be taken out as you continue to part it out.

HeavyMetalChevy · 10-19-2011, 09:18 AM

Quote:

Originally Posted by Critterman71

When you get to it I am interested in the dash assembly (metal) if it can be taken out at the spot welds under the windshield instead of cutting it out. I need one as mine is cut for the radio and has many extra holes drilled in it all over. I am in no hurry and will wait until it can be taken out as you continue to part it out.

No prob man...I will want around 150 for it..As you can see it is REAL nice...It has not scratches besides where the ignition is. The rest of the paint is perfect.I will negotiate price if shipping gets ridiculous. Send me a pic of how you want it cut...I cut one before I think that is how you want it here is a pic...

Thanks critterman,
Duane

Critterman71 · 10-19-2011, 09:29 AM

that looks close to me it looks like you cut it out at the spot weld flange under the window and that is what I am looking for so I can re weld it in original position with no issues. it will be easier than the one I have that was cut just behind the speaker area although it was a nice cut it will be tough for me to match it up. let me know on the shipping to 48872 and we will go from there. Thanks Critterman71

HeavyMetalChevy · 10-19-2011, 09:47 AM

Quote:

Originally Posted by Critterman71

that looks close to me it looks like you cut it out at the spot weld flange under the window and that is what I am looking for so I can re weld it in original position with no issues. it will be easier than the one I have that was cut just behind the speaker area although it was a nice cut it will be tough for me to match it up. let me know on the shipping to 48872 and we will go from there. Thanks Critterman71

Yeah it was my first cut out of one and it seemed the best way to do it. I will get the ship quotes...Going to get dimensions now.

HeavyMetalChevy · 10-19-2011, 10:04 AM

Quote:

Originally Posted by Critterman71

that looks close to me it looks like you cut it out at the spot weld flange under the window and that is what I am looking for so I can re weld it in original position with no issues. it will be easier than the one I have that was cut just behind the speaker area although it was a nice cut it will be tough for me to match it up. let me know on the shipping to 48872 and we will go from there. Thanks Critterman71

looks like $24.64 via UPS.. At 15 lbs. after packingI can hve it cut and poss. shipped out today..Your gonna love it!!!

coops714x4 · 10-19-2011, 10:07 AM

its for a daily driver. I have all the "extra" stuff I have a nice inner grill with a good emblem also. all I need is the outer dont buff if its a waste of your time, Just tell me how much you want for it. Coop

HeavyMetalChevy · 10-19-2011, 10:20 AM

Quote:

Originally Posted by coops714x4

its for a daily driver. I have all the "extra" stuff I have a nice inner grill with a good emblem also. all I need is the outer dont buff if its a waste of your time, Just tell me how much you want for it. Coop

well yeah not acting like I am doing any favors... I clean everything before I ship...I am OCD like that... I know I can get top dollar for it so I dont want to separate... I would want around 300 for the whole setup. That is like 60% off what it would cost for a repo.. .Sorry if I wasted your time...I just seen that you were showing interest is some HIGH quality parts like the buddies... I also read your build thread and Man I have the up,most respect for you!!!! You one tough son of a gun!!! I can def. relate.. I was shot about three years ago in my C4 and was partially paralyzed for some time... Some guy tried to rob me for huge some of 40 bucks in my wallet... Just got to keep on keeping on... Thanks for sharing your story...If you dont want grille I understand... Let me know if you need anything...

wdp1956 · 10-19-2011, 10:36 AM

Hey man I am interested in the engine towers and the power steering setup if the other guys decide to pass. Are the brackets still on the pump to mount to the block? Also can you ship to Rome, GA 30161? Thanks so much. Derick

10-22-2011, 01:38 AM	#2
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Complete rolling body and frame 71 Custom Deluxe Part out New parts breakdown and pricing Need something ask... Door Panels-sold AC Non cut dash-sale pending Power Steering setup and steering box-sold Front bumper with nice lens and housings-trade pending Outer Grille-sold Door hinges and strikers-sold __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

10-20-2011, 01:23 AM	#3
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Complete rolling body and frame 71 Custom Deluxe Part out emblems are going to new thread... reply there please __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

10-18-2011, 02:22 PM	#4
webfoot Registered User Join Date: Nov 2007 Location: Hermiston, OR Posts: 947	Re: Complete rolling body and frame 71 Custom Deluxe Part out How much for the lighter element only (no socket or bezel needed) and the wire that runs off the back to the fuse box? 97838 __________________ *Running in place gets you nowhere fast.* -me 1968 GTO 4-spd covnvertible 1970 K-20 4-speed, factory AC.

10-18-2011, 03:03 PM	#6
coops714x4 Registered User Join Date: Mar 2011 Location: Cement Oklahoma Posts: 916	Re: Complete rolling body and frame 71 Custom Deluxe Part out how much for the outer grill shipped to 73018, Thanks Coop __________________ 1971 K20, Coop's beast (project) 1972 C30 wrecker, "Big Ernest" (SOLD) 1975 K5 Blazer (wife's toy) she got it in the divorce 2014 Street Glide Special 1983 K20 Big Block, auto (work horse)

10-18-2011, 04:22 PM	#8
coops714x4 Registered User Join Date: Mar 2011 Location: Cement Oklahoma Posts: 916	Re: Complete rolling body and frame 71 Custom Deluxe Part out Ok how much for the whole thing Ill do the repair shipped to 73018 __________________ 1971 K20, Coop's beast (project) 1972 C30 wrecker, "Big Ernest" (SOLD) 1975 K5 Blazer (wife's toy) she got it in the divorce 2014 Street Glide Special 1983 K20 Big Block, auto (work horse)

10-18-2011, 05:28 PM	#12
burb71 Active Member Join Date: Oct 2002 Location: Ft. Myers, Fl Posts: 1,716	Re: Complete rolling body and frame 71 Custom Deluxe Part out Duane I got the pics of the exhaust brackets you sent, but I need the whole set up not just the rubber part n clip. I also want the little part thats rivets to the frame. Can you post pics from this Big block truck the way they look still mounted on the truck

10-18-2011, 08:35 PM	#14
cdp Registered User Join Date: Apr 2011 Location: AKRON,OH Posts: 81	Re: Complete rolling body and frame 71 Custom Deluxe Part out Hi, what's the shape of rear cab mouldings at two tone line? and if they are straight price shipped to 44305 Thanks Chris

10-19-2011, 12:38 AM	#16
guitardude127 Registered User Join Date: Sep 2008 Location: Sherman, TX Posts: 17	Re: Complete rolling body and frame 71 Custom Deluxe Part out I'd be interested in the driver side door, passenger front fender, passenger inner fender, battery tray, and core support. Are all these in usable condition?

10-19-2011, 06:59 AM	#18
Critterman71 Registered User Join Date: Nov 2008 Location: Lansing Mi Posts: 642	Re: Complete rolling body and frame 71 Custom Deluxe Part out When you get to it I am interested in the dash assembly (metal) if it can be taken out at the spot welds under the windshield instead of cutting it out. I need one as mine is cut for the radio and has many extra holes drilled in it all over. I am in no hurry and will wait until it can be taken out as you continue to part it out.

10-19-2011, 09:29 AM	#20
Critterman71 Registered User Join Date: Nov 2008 Location: Lansing Mi Posts: 642	Re: Complete rolling body and frame 71 Custom Deluxe Part out that looks close to me it looks like you cut it out at the spot weld flange under the window and that is what I am looking for so I can re weld it in original position with no issues. it will be easier than the one I have that was cut just behind the speaker area although it was a nice cut it will be tough for me to match it up. let me know on the shipping to 48872 and we will go from there. Thanks Critterman71

10-19-2011, 10:07 AM	#23
coops714x4 Registered User Join Date: Mar 2011 Location: Cement Oklahoma Posts: 916	Re: Complete rolling body and frame 71 Custom Deluxe Part out its for a daily driver. I have all the "extra" stuff I have a nice inner grill with a good emblem also. all I need is the outer dont buff if its a waste of your time, Just tell me how much you want for it. Coop __________________ 1971 K20, Coop's beast (project) 1972 C30 wrecker, "Big Ernest" (SOLD) 1975 K5 Blazer (wife's toy) she got it in the divorce 2014 Street Glide Special 1983 K20 Big Block, auto (work horse)

10-19-2011, 10:36 AM	#25
wdp1956 Registered User Join Date: Oct 2011 Location: Rome, GA Posts: 14	Re: Complete rolling body and frame 71 Custom Deluxe Part out Hey man I am interested in the engine towers and the power steering setup if the other guys decide to pass. Are the brackets still on the pump to mount to the block? Also can you ship to Rome, GA 30161? Thanks so much. Derick



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.