OR parting out 1970 C10 CST

[tll74]

[QUOTE=burb71;5966779][B]Is the radiator a 4 row with ports for tranny oil cooler, if so is it a original GM Harrison?

pics of the radiator. I pressure tested it today and its fine. It's also very clean inside. There are a some fins that need straightening and has a ding as the pic shows. Over all with a paint job it should be just fine.

[jdubu]

Is thye grille still for sale? What condition is it in? Any more close up pics of it?

[bigbadchev72]

Interested in the factory radio, Dont care if it works or not. I actually only need the mounting cups, nuts and knobs.

[tll74]

Just home tonight from the Portland Swap Meet a massive 5 day event. I believe the biggest event on the west coast. I left Tuesday afternoon and just got home a bit ago. I'm a vendor there and I'm beat!! I'll get back to all tomorrow.
Thanks, Tom

[TripleNickel]

Originally Posted by tll74

85.00 on the rubber with trim. I have several of these. 25.00 for the band.

You replied back to Tommy72 back on March 24th and there doesn't seem to have been a response from him.

If the tailgate band is still available, I'd like to get shipping quote to 44305.

I have also sent a follow-up PM regarding the shipment of previous order.

Thanks,

Wayne

[jobsforu]

How much for the vent window shipped to 29662

[tll74]

Originally Posted by skrewbizz

Do u still have the good and grill?
Posted via Mobile Device

Grill is sold and I don't ship hoods.

Originally Posted by jdubu

Is thye grille still for sale? What condition is it in? Any more close up pics of it?

Grill is sold.

Originally Posted by bigbadchev72

Interested in the factory radio, Dont care if it works or not. I actually only need the mounting cups, nuts and knobs.

13.00 shipped on the mounting cups, nuts and knobs.

Originally Posted by jobsforu

How much for the vent window shipped to 29662

86.00 shipped

Thanks, Tom

[transfromer58]

do you still have the center rear bumper brackets for sale?

[dirish]

How for grill 69-70 shipped to 37148. Glove box door. And the windshield gasket, if not harmed.
Thank you
Posted via Mobile Device

[tll74]

Originally Posted by Gary 70 Jimmy

I see the the rubber for the bottom of a radiator is that for a 4 core radiator. How nice is the black steering wheel.

Pics coming on the wheel. The rad rubbers are part of the 4 core mount set.

Originally Posted by Brian Atkinson

ill take the driver side fender if it is straight and rust free.

The RH fender is actually the shining star on all the sheet metal as this truck was a major rust bucket. It has been replaced with a new GM on the last go around. It is rust free other than surface rust where it wasn't painted on the inside. It does have a minor dent. 200.00 plus shipping. It will be stripped and acid dipped.

Originally Posted by teeitup

Tom, I may need the black visors, I'll have to check the ones I have for the blazer. Thanks Randy

Randy, I can do another to make a very nice pair. Just let me know.


[quote=mahanian;5965597]I'll take the visors pending price if they get to me
The saddles ones or black? We'll see what Randy decides on the black.

Originally Posted by BigRed76

Put me second for the black arm rests pending better pics and price.
I'm also interested in the hood bowtie and the black steering wheel pending condition/better pictures.

Hood bowtie was sold locally. Wheel pics coming up

Originally Posted by DeadheadNM

Tom - price/condition on the tailgate and lower woodgrain molding...thanks Pete

Pete, The tailgate is junk.

Originally Posted by BLAZERMAN

Can I get a price on the mirrors and the roof visor.
Posted via Mobile Device

Prices posted.

Originally Posted by grwnded71

Whats the condition of the vent windows? chrome good? price + shipping to 53105....thanks!

LH vent is junk. With a second look the RH chrome is not that nice. pics coming.

Originally Posted by DeadheadNM

Also - is that a GM spotlight? If so price/condition on that also..thanks again.

Pete, the spot light is made by Unity. Not sure if GM. 75.00 Pics posted

Originally Posted by timmoser

how much for the steering colume shipped

Need Zip for shipping cost. Probably about 20.00

Originally Posted by Heavy Evy

Wow that truck looked really decent. More pics of the Condition and price of hubcaps shipped to 84116 please?

The truck is a total rust bucket. The caps would make a nice set with some TLC. more pics coming

Originally Posted by 29od1

Interested in the bullseyes if you can post some closeup pics.
Thanks

Pics coming

Originally Posted by tommys72

Windshield rubber and trim, and tailgate band....how much
Posted via Mobile Device

85.00 on the rubber with trim. I have several of these. 25.00 for the band.

Originally Posted by dirish

How for grill 69-70 shipped to 37148. Glove box door. And the windshield gasket, if not harmed.
Thank you
Posted via Mobile Device

I have a very nice rubber by it's self 50.00 plus shipping or 85.00 with trim. The grill is sold. Glove box door 30.00 plus shipping.

Originally Posted by blasher

Interested in the deluxe side markers if available.

No good markers. They were aftermarket and missing the chrome loops.
[quote=DeadheadNM;5965783]I'll take the lower RH/LH door woodgrain if in decent overall shape.
Pete, The lower door trim is kinda ruff. Many door dings

Originally Posted by sasquatch58

i'll take the radio speaker if it worksand radio/speaker mounting brackets..also need horn or duel horn set-updon't need radio.how muchprices on what you have inc.shipping please..thanks

Un sure of speaker condition. I can do the speaker and radio brackets only for 8.00, 25.00 on a pair of tested horns plus 12.00 shipping

Originally Posted by Trucksrme

Put me in line for the tailgate pending price and pics.shipped to 77087. Thanks
Posted via Mobile Device

Tailgate is junk.

Originally Posted by dbaer

how much for the heater core shroud shipped to 03303? do you have the heater core and if yes how is it?

17.00 shipping. I have a nice used aftermarket heater core for 10.00

Originally Posted by TBONE1964

Tom,

Do you have a small block crank pulley for a short pump? I need it for a 72 350 with P/S and AC.

Let me know. I can pick it up Monday morning (I am in JC for a few days).

Thank you,
Tom

Sure, no problem. Yes, I do have the double groove AC crank pulley. 20.00 picked up. Do you need the P/S pulley on the crank too? I have a 72 C20 with A/C and P/S going into the shop next for a complete tear down.

Originally Posted by mo

Interested in the deluxe gas pedal shipped to 93013
Posted via Mobile Device

Shipping is 8.00

Originally Posted by BigRed76

Is that $65 shipped for the steering wheel?
And would you mind getting a picture of the cracks on that steering wheel?
Posted via Mobile Device

65.00 plus shipping. Pics coming next.

Originally Posted by TripleNickel

I'd like to get in line on steering column, pending transmission type and shipping quote to 44305.

Does power brake conversion come with everything forward of the pedal and is it for drum or disc brakes? Shipping quote for this to 44305 as well please.

Is E-brake ratchet full assembly with pedal and release handle? Shipping quote for this to 44305 also.

If you think there could be some savings on combined shipping for all of these, please let me know.

Thanks!

Your second on the steering column although I do have a twin to it. It is out a truck with a TH350. It would be the same for TH400. Yes, the P/B is complete for a conversion forward of the pedal. I have one of each for drum and disc. Yes, the e-brake is complete. The column would ship at 26.00, P/B and e-brake at 26.00. I would have to ship two packages.

Originally Posted by TripleNickel

May I also get a shipping quote to 44305 on the rear view mirror.

I sold the mirror toady to GJB he drove down today and bought some items.

Originally Posted by burb71

Is the radiator a 4 row with ports for tranny oil cooler, if so is it a original GM Harrison?

How much?

The rad is an original GM Harrison 4 core with AT cooler. It looks good and was full of antifreeze. 90.00 plus shipping need Zip for qoute. Pics available.

Originally Posted by 69sinker

I'll take kick panel vents, side window visors, defrost vent (pass), rear bumper brackets, and disc/ drum power brake conversion to 62027 quote please
Posted via Mobile Device

No bumper brackets at this time. Shipping for the other is 28.00

[TripleNickel]

Originally Posted by tll74

Your second on the steering column although I do have a twin to it. It is out a truck with a TH350. It would be the same for TH400.

Yes, the P/B is complete for a conversion forward of the pedal. I have one of each for drum and disc.

Yes, the e-brake is complete.

The column would ship at 26.00, P/B and e-brake at 26.00. I would have to ship two packages.

If both columns are black, I'll take the best of the pair if that is fair.

I didn't see the brake pedal in your photos. Would it be available if I take the drum/drum P/B setup?

I'll let you know on the e-brake as soon as I know the brake pedal situation.

Do you know, is the underdash wiring the same on all 1970 trucks, regardless of engine, transmission, and dash cluster? Would your wiring harness be able to fit into either of the (at least) 2 packages I'll be getting?

Thanks,

Wayne

[tll74]

Originally Posted by TripleNickel

If both columns are black, I'll take the best of the pair if that is fair.

I didn't see the brake pedal in your photos. Would it be available if I take the drum/drum P/B setup?

I'll let you know on the e-brake as soon as I know the brake pedal situation.

Do you know, is the underdash wiring the same on all 1970 trucks, regardless of engine, transmission, and dash cluster? Would your wiring harness be able to fit into either of the (at least) 2 packages I'll be getting?

Thanks,

Wayne

Wayne, Yes I have the pedal assembly from under the dash. I would include it for 25.00. No, the under dash wiring is not all the same. They differ as to with or without gauges, and MT or AT. Engine doesn't matter. Yes, I could include the wiring in either package. Adding the wiring and the pedal assy would raise the weight so the cost could go up a few bucks. Both columns are equally nice.
Thanks, Tom

[TripleNickel]

Originally Posted by tll74

Wayne, Yes I have the pedal assembly from under the dash. I would include it for 25.00. No, the under dash wiring is not all the same. They differ as to with or without gauges, and MT or AT. Engine doesn't matter. Yes, I could include the wiring in either package. Adding the wiring and the pedal assy would raise the weight so the cost could go up a few bucks. Both columns are equally nice.
Thanks, Tom

If things work out on the cooling system setup, that would have to go in another box anyway, so no need for us to wait on this first grouping .

I am going to pass on the e-Brake. Otherwise...

Time for a grand total Mr. Cashier!

Column, complete (Drum/Drum) P/B setup including pedal, and under-dash wiring harness with shipping to 44305.

[blasher]

Interested in the deluxe side markers if available.

[DeadheadNM]

I'll take the lower RH/LH door woodgrain if in decent overall shape.

LMK re: the tailgate and spotlight when poss.

Thanks, Pete

[sasquatch58]

i'll take the radio speaker if it worksand radio/speaker mounting brackets..also need horn or duel horn set-updon't need radio.how muchprices on what you have inc.shipping please..thanks

[Trucksrme]

Put me in line for the tailgate pending price and pics.shipped to 77087. Thanks
Posted via Mobile Device

[tll74]

Gota run to town. I'll get back to all later. Thanks, Tom

[TBONE1964]

Tom,

Do you have a small block crank pulley for a short pump? I need it for a 72 350 with P/S and AC.

Let me know. I can pick it up Monday morning (I am in JC for a few days).

Thank you,
Tom

[dbaer]

how much for the heater core shroud shipped to 03303? do you have the heater core and if yes how is it?

[mo]

Interested in the deluxe gas pedal shipped to 93013
Posted via Mobile Device

[BigRed76]

Is that $65 shipped for the steering wheel?
And would you mind getting a picture of the cracks on that steering wheel?
Posted via Mobile Device

[LSUMurse]

I'm out.
Posted via Mobile Device

[TripleNickel]

I'd like to get in line on steering column, pending transmission type and shipping quote to 44305.

Does power brake conversion come with everything forward of the pedal and is it for drum or disc brakes? Shipping quote for this to 44305 as well please.

Is E-brake ratchet full assembly with pedal and release handle? Shipping quote for this to 44305 also.

If you think there could be some savings on combined shipping for all of these, please let me know.

Thanks!

[TripleNickel]

May I also get a shipping quote to 44305 on the rear view mirror.