Lets see your exhaust exit locations! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

killthewabbit · 07-18-2008, 05:11 PM

Quote:

Originally Posted by Grande Rojo

mine

Nice! You didn't replace the stepper bed with a fleet, did you?

Grande Rojo · 07-19-2008, 10:40 PM

Quote:

Originally Posted by killthewabbit

Nice! You didn't replace the stepper bed with a fleet, did you?

Nope, different truck.

boatpuller · 07-18-2008, 09:45 AM

here's mine.not a real good exhaust pic.other side is the same, obviously

.it's got ceramic coated shorties and true dual's,no cat's.flowmaster original 40's.

moneyeater · 07-18-2008, 03:20 PM

Just straight out the back.True duals with the cheapest mufflers i could get and jet hot coatet longtube headers!
Name: Auspuff1 [640x480].JPG
Views: 3055
Size: 102.3 KB

Name: Auspuff1 [640x480].JPG
Views: 3055
Size: 102.3 KB

Name: Auspuff4 [640x480].JPG
Views: 3061
Size: 84.1 KB

Name: Auspuff12a.JPG
Views: 2866
Size: 81.4 KB

Name: IMGP0358.JPG
Views: 2833
Size: 91.4 KB

74 C-30 · 07-19-2008, 12:49 PM

what about through the roll pan? I've seen that alot on 88+ trucks

Ford Assassin · 08-04-2008, 09:27 PM

Quote:

Originally Posted by 74 C-30

what about through the roll pan? I've seen that alot on 88+ trucks

I'd love to see that on a '67-'72.

killthewabbit · 08-05-2008, 03:18 PM

Quote:

Originally Posted by 74 C-30

what about through the roll pan? I've seen that alot on 88+ trucks

There was one red stepside in an old issue of Truckin that had a cool rollpan exhaust. I'm looking for it now on their site. Here's a page on Jeff's site that has the truck, but not the rear view.

http://www.73-87.com/7387info/misc/bsb_2.jpg

**update**
Well, I looked through all 37 pages of feature trucks on that site and couldn't find it. Oh well. The rollpan had two semi-circular cutouts at the bottom where the exhaust tips came through. It looked pretty cool.

DubDubU · 07-23-2008, 06:08 PM

Mine turns down just before the rear bumper. Ya can't see it but ya can sure hear it.

GKsport67 · 08-06-2008, 01:01 AM

Quote:

Originally Posted by DubDubU

Mine turns down just before the rear bumper. Ya can't see it but ya can sure hear it.

What does the X pipe do?

Ford Assassin · 08-06-2008, 02:12 AM

Quote:

Originally Posted by GKsport67

What does the X pipe do?

Balances out the exhaust pressure from side to side. A H-pipe does basically the samething, although x-pipes typically make more power by design.

GKsport67 · 08-16-2008, 03:17 PM

Quote:

Originally Posted by Ford Assassin

Balances out the exhaust pressure from side to side. A H-pipe does basically the samething, although x-pipes typically make more power by design.

Thanks!!!

Thumpin455 · 07-23-2008, 08:56 PM

I would post a pic, but I am quite sure it would result in a perm ban,.,.,

thirdstreettito · 08-16-2008, 06:20 PM

Quote:

Originally Posted by Thumpin455

I would post a pic, but I am quite sure it would result in a perm ban,.,.,

? Huh?

dubdeuce80 · 08-18-2008, 12:49 AM

the driveshaft was out in the second pic, hence the plastic bag and caked on oil all over the xmember

Desperado454 · 08-18-2008, 01:17 AM

Quote:

Originally Posted by Thumpin455 View Post
I would post a pic, but I am quite sure it would result in a perm ban,.,.,

? Huh?

Pretty sure he was threatening to post a picture of his ass, but i could be way off

Square84 · 08-18-2008, 01:47 AM

Quote:

Originally Posted by dubdeuce80

the driveshaft was out in the second pic, hence the plastic bag and caked on oil all over the xmember

if no pipe is to be added that should be nice and loud

87Lowrider · 08-18-2008, 08:10 AM

Quote:

Originally Posted by thirdstreettito

? Huh?

I think desperado is correct... but, you're not alone, I didn't get it either. Doh!

Rooster's82 · 07-24-2008, 08:51 AM

not a close up but you get the point...I'm planning on finding a new exhuast system with an H or X pipe one day soon. When that happens i may have to change the exit location, im not sure how much i like where they are now.

Desperado454 · 07-28-2008, 01:25 AM

Heres what i did on my 76...made out of 2.5" pipe that was laying around, flowmaster 40's, and the headers I used to run on my nova.

jrsmith_2010 · 08-05-2008, 07:51 PM

i have mine as turn downs at the rear axel after my 5/7 drop. its loud as hell, but that because i have strait pipes goin to the turn downs. in my opinion if its lowered, its better not to see them unless they are in a good lookin place, but thats just me.

Square84 · 08-06-2008, 12:09 AM

i have long tube headers into 2.5 inch pipe then 40 series 2chamber flowmasters with 3 inch dumps in front of the axle. they used to dump under the cab but that was way to loud.

gchemist · 08-06-2008, 05:49 AM

My truck sounds like this Vette. I have dual Magnaflows and Xpipe.
http://pysales.com/movies/99corvette...es-racepro.MPG

X-pipes explained
http://www.pypesexhaust.com/xpipes.html

Dumping before the axel is noisy for any muffler. Especially inside the cab.

Ford Assassin · 08-16-2008, 06:12 PM

Quote:

Originally Posted by gchemist

Dumping before the axel is noisy for any muffler. Especially inside the cab.

Totally. Dumping the exhaust under any car/truck will make it louder for no other reason but because the exhaust note echoing off the ground and echoing off anything under the car/truck chassis, etc.

GKsport67 · 08-18-2008, 02:37 AM

Here's mine(side exit)

X pipe is a must!!!

07-18-2008, 09:45 AM	#3
boatpuller Registered User Join Date: Sep 2005 Location: Sun City West, Az Posts: 3,822	Re: Lets see your exhaust exit locations! here's mine.not a real good exhaust pic.other side is the same, obviously .it's got ceramic coated shorties and true dual's,no cat's.flowmaster original 40's. Attached Images __________________ " Never look up a dead dogs butt."

07-18-2008, 03:20 PM	#4
moneyeater Registered User Join Date: Feb 2003 Location: Northern Germany,near Bremen Posts: 684	Re: Lets see your exhaust exit locations! Just straight out the back.True duals with the cheapest mufflers i could get and jet hot coatet longtube headers! __________________ My little US vehicle parts business: http://www.thegearheaddepot.com/ Come have a look! ´81 GMC C 10, Spanish Red

07-19-2008, 12:49 PM	#5
74 C-30 Dually Pride Join Date: Jun 2008 Location: NH Posts: 540	Re: Lets see your exhaust exit locations! what about through the roll pan? I've seen that alot on 88+ trucks __________________ If I have to explain, you wouldn't understand. '74 Chevy C-30 350/4 speed/dually '94 Ford Ranger

07-23-2008, 06:08 PM	#8
DubDubU Registered User Join Date: Mar 2007 Location: st louis,mo Posts: 313	Re: Lets see your exhaust exit locations! Mine turns down just before the rear bumper. Ya can't see it but ya can sure hear it. Attached Images __________________ '79' shortbed

07-23-2008, 08:56 PM	#12
Thumpin455 My truck is an alcoholic Join Date: Nov 2007 Location: Marquette Mi Posts: 303	Re: Lets see your exhaust exit locations! I would post a pic, but I am quite sure it would result in a perm ban,.,., __________________ Too much stuff, too many projects to list everything. my 454 urged 76 swb beater

08-18-2008, 12:49 AM	#14
dubdeuce80 Registered User Join Date: Feb 2007 Location: Arizona Posts: 213	Re: Lets see your exhaust exit locations! the driveshaft was out in the second pic, hence the plastic bag and caked on oil all over the xmember

07-24-2008, 08:51 AM	#18
Rooster's82 Registered User Join Date: Mar 2008 Location: Clearwater FL Posts: 271	Re: Lets see your exhaust exit locations! not a close up but you get the point...I'm planning on finding a new exhuast system with an H or X pipe one day soon. When that happens i may have to change the exit location, im not sure how much i like where they are now. Attached Images __________________ JG If you can't find it at the junk yard you don't need it.

07-28-2008, 01:25 AM	#19
Desperado454 Registered User Join Date: Feb 2008 Location: Langley, BC Posts: 282	Re: Lets see your exhaust exit locations! Heres what i did on my 76...made out of 2.5" pipe that was laying around, flowmaster 40's, and the headers I used to run on my nova. Attached Images

08-05-2008, 07:51 PM	#20
jrsmith_2010 I like turtles... Join Date: May 2008 Location: Kansas Posts: 993	Re: Lets see your exhaust exit locations! i have mine as turn downs at the rear axel after my 5/7 drop. its loud as hell, but that because i have strait pipes goin to the turn downs. in my opinion if its lowered, its better not to see them unless they are in a good lookin place, but thats just me.

08-06-2008, 12:09 AM	#21
Square84 I don't think these pills work Join Date: Apr 2008 Location: burkburnett,Tx Posts: 626	Re: Lets see your exhaust exit locations! i have long tube headers into 2.5 inch pipe then 40 series 2chamber flowmasters with 3 inch dumps in front of the axle. they used to dump under the cab but that was way to loud. Attached Images __________________ SQUARE84 90 SUBURBAN

08-06-2008, 05:49 AM	#22
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Re: Lets see your exhaust exit locations! My truck sounds like this Vette. I have dual Magnaflows and Xpipe. http://pysales.com/movies/99corvette...es-racepro.MPG X-pipes explained http://www.pypesexhaust.com/xpipes.html Dumping before the axel is noisy for any muffler. Especially inside the cab. Last edited by gchemist; 08-06-2008 at 05:49 AM.

08-18-2008, 02:37 AM	#24
GKsport67 Registered User Join Date: Jan 2008 Location: Atlanta,Ga Posts: 660	Re: Lets see your exhaust exit locations! Here's mine(side exit) X pipe is a must!!! __________________ www.gkautospa.com Like A Rock! http://67-72chevytrucks.com/vboard/s...d.php?t=397153 Last edited by GKsport67; 08-18-2008 at 02:38 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.