Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
03-13-2015, 03:35 PM | #26 | ||
Registered User
Join Date: Feb 2012
Location: turlock
Posts: 2,177
|
Re: Great Grandpa's Legacy reborn
Quote:
Quote:
We had a spare SBC 350 in the wings so we just decided it's easier to swap with one we know that's decent rather than jumping head into one with obvious problems. It's certainly one of those true pioneer stories and we just hope that he's smiling at seeing his truck being truly taken Care of like he always did.
__________________
Project NewType 1972 Chevy C/10 Cheyenne Super ( Daily Driven Showtruck ) http://67-72chevytrucks.com/vboard/s...d.php?t=507903 Project Great Grandpa's Legacy 1973 Chevy C/10 Cheyenne ( Current daily driver collecting big time parts ) http://67-72chevytrucks.com/vboard/s...89#post7084289 - Dylan (209)-985-7721 |
||
03-13-2015, 07:20 PM | #27 |
Registered User
Join Date: Jul 2014
Location: Winston-Salem, NC
Posts: 561
|
Re: Great Grandpa's Legacy reborn
Good work friend! Did you have much trouble on the exhaust manifold and flange studs/bolts? Was contemplating pulling mine for a refresh but worried about breaking them off and having to spend more than I want right now.
|
03-13-2015, 08:35 PM | #28 |
Registered User
Join Date: Feb 2012
Location: turlock
Posts: 2,177
|
Re: Great Grandpa's Legacy reborn
Fortunately I didn't have any trouble at all, I think I knocked on all the wood in my house and rubbed every horseshoe at my buddies farm for the luck on that, I'm glad it wasn't a bear like most are. Best to soak it in some good PB Blaster over night and just go slow.
__________________
Project NewType 1972 Chevy C/10 Cheyenne Super ( Daily Driven Showtruck ) http://67-72chevytrucks.com/vboard/s...d.php?t=507903 Project Great Grandpa's Legacy 1973 Chevy C/10 Cheyenne ( Current daily driver collecting big time parts ) http://67-72chevytrucks.com/vboard/s...89#post7084289 - Dylan (209)-985-7721 |
03-14-2015, 10:23 AM | #29 |
Registered User
Join Date: Feb 2012
Location: turlock
Posts: 2,177
|
Re: Great Grandpa's Legacy reborn
Welcome to the new parts lineup! Dontcha just love fresh clean parts along with a new longblock to mock everything up? We certainly do, introducing the next 350 on the line from within our back burner she'll be brought to life as a stock rebuild with very mild upgrades. needless to say we would need to start completely over adding the very proven Edelbrock performer intake and using a spacer plate to help with any chance of boiling fuel, rebuilding the original Quadrajet locally as we have never messed with one in all honesty so we had that built outside of the garage by a good friend, upgrading to a modern HEI setup with new cap and rotor (another in stock item like the intake) finding a non cracked driver exhaust manifold from the graveyard locally, ridding ourselves of the original a/c components such as hard line, compressor, condenser to include fresh new pieces shown such as the waterpump, power steering pump, and fuel pump. New starter, battery and radiator added in as the list grew more and more from our down the street oreillys (which have been extremely helpful as they know is fairly well from multiple truck projects) and our local Motor parts store with the occasional summit order. She will be a mainly stock rebuild with a few advancements to help it along as a daily driven vehicle. Shot the new block with a can of orange engine enamel to freshen her up and finished off the valve covers to match.
__________________
Project NewType 1972 Chevy C/10 Cheyenne Super ( Daily Driven Showtruck ) http://67-72chevytrucks.com/vboard/s...d.php?t=507903 Project Great Grandpa's Legacy 1973 Chevy C/10 Cheyenne ( Current daily driver collecting big time parts ) http://67-72chevytrucks.com/vboard/s...89#post7084289 - Dylan (209)-985-7721 Last edited by vectorit; 09-20-2016 at 11:21 PM. |
03-14-2015, 10:25 AM | #30 |
C/10 junkie
Join Date: Nov 2010
Location: Stockton Ca
Posts: 9,093
|
Re: Great Grandpa's Legacy reborn
Looking good my man.
__________________
Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!" |
03-14-2015, 10:26 AM | #31 |
Registered User
Join Date: Feb 2012
Location: turlock
Posts: 2,177
|
Re: Great Grandpa's Legacy reborn
LOT of steps forward being made today as im catching you all up closer and closer to our current driver as I will be out in our friends shop today completely tearing into a secret side project getting ourselves ready for the major overhaul this build will take on at a later date but always remember measure twice, hammer your finger once, add a bunch to the swear jar and move along! Will grab photos along the way so no one is left out of course! Enjoy your Saturday and Sunday fellow truckers!
Mock up was complete shortly after in the evenings after work such as wire routing and getting everything bolted right and letting gaskets set the proper length of time. I almost wanted to just roll her inside and set her as a coffee table after she came out looking so clean! Gotta love a stock appearing engine for nostalgia purposes.
__________________
Project NewType 1972 Chevy C/10 Cheyenne Super ( Daily Driven Showtruck ) http://67-72chevytrucks.com/vboard/s...d.php?t=507903 Project Great Grandpa's Legacy 1973 Chevy C/10 Cheyenne ( Current daily driver collecting big time parts ) http://67-72chevytrucks.com/vboard/s...89#post7084289 - Dylan (209)-985-7721 Last edited by vectorit; 09-20-2016 at 11:21 PM. |
03-14-2015, 10:29 AM | #32 |
Registered User
Join Date: Feb 2011
Location: Cold Canada
Posts: 310
|
Re: Great Grandpa's Legacy reborn
that is a wicked clean engine!
|
03-14-2015, 01:25 PM | #33 |
Registered User
Join Date: Jul 2014
Location: Winston-Salem, NC
Posts: 561
|
Re: Great Grandpa's Legacy reborn
Yes!!
|
03-14-2015, 03:12 PM | #34 |
Registered User
Join Date: Sep 2012
Location: Oakland County, MI
Posts: 138
|
Re: Great Grandpa's Legacy reborn
That looks great!
__________________
MY6 Stepside |
03-14-2015, 04:35 PM | #35 |
State of Confusion!
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 47,091
|
Re: Great Grandpa's Legacy reborn
Very nice!!
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
03-15-2015, 02:01 PM | #36 |
Registered User
Join Date: Feb 2012
Location: turlock
Posts: 2,177
|
Re: Great Grandpa's Legacy reborn
Much appreciated guys! We love to hear your feedback and enjoy moving forward everyday bringing our (great) grandpas Legacy back to life the right way. Writing up the next update as I type this so yall should have some sunday reading material
__________________
Project NewType 1972 Chevy C/10 Cheyenne Super ( Daily Driven Showtruck ) http://67-72chevytrucks.com/vboard/s...d.php?t=507903 Project Great Grandpa's Legacy 1973 Chevy C/10 Cheyenne ( Current daily driver collecting big time parts ) http://67-72chevytrucks.com/vboard/s...89#post7084289 - Dylan (209)-985-7721 |
03-15-2015, 02:31 PM | #37 |
Registered User
Join Date: Feb 2012
Location: turlock
Posts: 2,177
|
Re: Great Grandpa's Legacy reborn
SHE BREATHES ONCE AGAIN! Alright so who's ready for a startup video!! First one shows the break in and boy aside from the leaky brass fitting on the Quadrajet (that I never touched myself during the rebuild of everything else, that we simply had to tighten a tick) she popped off just the way everyone wants one too. Few pump and primed properly as well as a correct motor break in and preparation crests a very smooth process. The second video shows the trueness of a stock rebuild and a very silky smooth running sewing machine essentially. But don't doubt her she rolls down the road just fine!
On a side not I really enjoy the mock up time I had been allowed during this build as I could set my parts as needed and find if I preferred them one way or another especially the run of the Sparkplug wires, I know they are an update with the wire loom runs but I feel they blend well and organize them in just the right way for this engine. I must say I'm very proud of the way this look became what it did.
__________________
Project NewType 1972 Chevy C/10 Cheyenne Super ( Daily Driven Showtruck ) http://67-72chevytrucks.com/vboard/s...d.php?t=507903 Project Great Grandpa's Legacy 1973 Chevy C/10 Cheyenne ( Current daily driver collecting big time parts ) http://67-72chevytrucks.com/vboard/s...89#post7084289 - Dylan (209)-985-7721 Last edited by vectorit; 09-20-2016 at 11:21 PM. |
03-15-2015, 05:24 PM | #38 |
Registered User
Join Date: Jan 2013
Location: Nacogdoches, Texas
Posts: 895
|
Re: Great Grandpa's Legacy reborn
That motor looks amazing! Awesome work man!
__________________
Current Build 89 s10 ecsb 2wd 4.3/700r4 50k OG Miles Instagram- shaggin_s10 '86 Chevrolet C10 Custom Deluxe - Gen V 454 - 4l80e - welded 12 bolt (Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=611611 ) SOLD |
03-15-2015, 09:37 PM | #39 |
Registered User
Join Date: Feb 2012
Location: turlock
Posts: 2,177
|
Re: Great Grandpa's Legacy reborn
Thanks brother!
__________________
Project NewType 1972 Chevy C/10 Cheyenne Super ( Daily Driven Showtruck ) http://67-72chevytrucks.com/vboard/s...d.php?t=507903 Project Great Grandpa's Legacy 1973 Chevy C/10 Cheyenne ( Current daily driver collecting big time parts ) http://67-72chevytrucks.com/vboard/s...89#post7084289 - Dylan (209)-985-7721 |
03-15-2015, 10:12 PM | #40 |
Registered User
Join Date: Jul 2014
Location: Winston-Salem, NC
Posts: 561
|
Re: Great Grandpa's Legacy reborn
Dang! Clean stuff bud.
|
03-16-2015, 10:28 AM | #41 |
Registered User
Join Date: Feb 2012
Location: turlock
Posts: 2,177
|
Re: Great Grandpa's Legacy reborn
Final the major hurdle was overcome and we could breathe easy and return back to what we do well in assembly and fitment. (We are not engine builders/tuners or the best of diagnosing them either) but we do know how to get them there and bring them back. My pops specialty that he passed down to me was taking pride in making it look just as you want and taking the time to perfect it (no matter how much it bugged you then, it would only big you that much more if you left it be.) so with that said we spent hours upon weekends getting every little thing to look they way we felt was right and proper to the truck. We researched and have adapted tricks from our build on my 72 many times in relation to the rebuild of this 73 of his. My big pet peeve is having non-functional pieces to any build, for what is a truck worth if it only cosmetically performs but not truly perform in its nuances? So I dove into the largest project of routing wires, repainting pieces and areas to give them new life but I left a majority OEM as some areas would just require more than what they were worth in the long run within the engine compartment and replacing fuses and finding shorts within the system or improper ends that were hacked poorly. We all hate wiring even the electrical prowess builders upon us as it's just purely not fun but as of late I've found it enjoyable to a point and makes a very large statement on the dedication to detail and function. New fuses throughout the truck, new hand made thicker/stronger battery cables, new ground leads and true grounding techniques along with resurfacing contacts on sockets for the best in the lights, brand new LED quality bulbs installed within the gauge cluster that had made an absolute WORLD of difference. ( they don't dim like most people ask about but I've never found a reason to dim them myself as I enjoy being able to see my gauges and they certainly don't blind me ) new discovery led me to hearing a true AM radio for the first time shortly after that, though there's never anything good to me on here's our first big reveal though in my pops first fully custom piece of interior. A factory seat frame from the truck with ORIGINAL seat foam as it was good enough to shape and create "buckets" like a newer car and used a combination of Saddle Tan vinyl and Ostrich pleated inserts. What a gorgeous seat this came out to be from our good friend Jess of Jess's Auto Tops in Salida, Ca! Big shoutout to him and his amazing work. So comfy to sit in and just sets off the inside so well. Here's another awesome story to share TWO different trucks though. Back when I was very little obviously my pops set me in his square-body Dooley's steering wheel that he was building in the early 90's, well I grabbed the opportunity to get this picture of my baby cousin Niko setting in the wheel of great grandpas truck. Definitely smiles all around at the memory there, of course I had to grab one of Papa-San himself enjoying his new seat and reliving memories of his time with his grandpa.
__________________
Project NewType 1972 Chevy C/10 Cheyenne Super ( Daily Driven Showtruck ) http://67-72chevytrucks.com/vboard/s...d.php?t=507903 Project Great Grandpa's Legacy 1973 Chevy C/10 Cheyenne ( Current daily driver collecting big time parts ) http://67-72chevytrucks.com/vboard/s...89#post7084289 - Dylan (209)-985-7721 Last edited by vectorit; 09-20-2016 at 11:22 PM. |
03-16-2015, 10:57 AM | #42 |
I'm just glad to be here!
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
|
Re: Great Grandpa's Legacy reborn
The engine and the minor upgrades turned out nice. The Seat looks really comfy too!
__________________
Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square |
03-17-2015, 10:39 AM | #43 |
Registered User
Join Date: Feb 2012
Location: turlock
Posts: 2,177
|
Re: Great Grandpa's Legacy reborn
I'll be very jealous as he'll be driving it to the local goodguys show at the end of this month.
__________________
Project NewType 1972 Chevy C/10 Cheyenne Super ( Daily Driven Showtruck ) http://67-72chevytrucks.com/vboard/s...d.php?t=507903 Project Great Grandpa's Legacy 1973 Chevy C/10 Cheyenne ( Current daily driver collecting big time parts ) http://67-72chevytrucks.com/vboard/s...89#post7084289 - Dylan (209)-985-7721 |
03-19-2015, 01:48 PM | #44 |
Registered User
Join Date: Feb 2012
Location: turlock
Posts: 2,177
|
Re: Great Grandpa's Legacy reborn
So we've had the startup now, I suppose it's time to get her driving and causing havoc! Just kidding no havoc as the truck won't even brake stand or do a slow rolling burnout believing the rear brakes may be a little tight causing the back not to break loose so we'll have them evaluated at our local tire shop (City Tire) in Modesto. Great business and amazing people we always love their customer support. Speaking of we just had new wheels and tires put on, not fancy but they get the job done.
Now into debugging week 1 of Great Grandpas Legacy. First and foremost we had quite a few problems getting the correct bracketry setup for the throttle cable and trans kick down . Took a few tries but I managed to cut and spread the throttle bracket to allow full throttle when pressing the pedal as it was awfully doggy and had at least an inch more to go when we first put it together. Second task was getting the kick down to act properly as getting on the freeway was a mighty task without the drop down at least without doing it yourself and risking a drive to 1st gear shift.. was quite problematic going from bone stock intake and Quadrajet setup to an Edelbrock performer with Quadrajet and a 1" intake to carb spacer as well in the mix making the height of the bracket to cable mount on carb quite steep, luckily I had a few different style and managed to make a stock one work well enough for the time being. The third and largest task, but most fulfilling, was making all the darn lights work! Man chasing grounds like crazy and not knowing these trucks underneath was a heck of a challenge to me. Lots of up and downs and checking areas in the late nights after work in the driveway. That big 5 truck garage-mahal we all dream of needs to come quite sooner than expected if you ask me. Found a couple bad sockets in the tail lights that were causing a flurry of turn signal and driving lights issues but was able to clean all contacts as best as I could and get them functioning properly. Installed new door pins and brought back the dome light and under dash courtesy light which is a MAJOR must have when trying to get in your truck at night or early morning and it's pitch black. Was even able to get the cargo light jinning as well so that made her all legal as every other light functioned just as well as it did off the assembly line in 73. We would also like to take this time to put in a poll and see what everyone else thinks what would look best, the black NASCAR style wheels as they are, or the cheyenne full wheels covers fully polished or painted as they were from factory? Truck originally came with full wheel covers of course and we even managed to find two of them that came with it from the dealership. LET US KNOW!
__________________
Project NewType 1972 Chevy C/10 Cheyenne Super ( Daily Driven Showtruck ) http://67-72chevytrucks.com/vboard/s...d.php?t=507903 Project Great Grandpa's Legacy 1973 Chevy C/10 Cheyenne ( Current daily driver collecting big time parts ) http://67-72chevytrucks.com/vboard/s...89#post7084289 - Dylan (209)-985-7721 Last edited by vectorit; 09-20-2016 at 11:22 PM. |
03-19-2015, 03:32 PM | #45 |
Registered User
Join Date: Mar 2015
Location: the southwest
Posts: 16
|
Re: Great Grandpa's Legacy reborn
sweet
__________________
|
03-19-2015, 06:04 PM | #46 |
Registered User
Join Date: Jul 2014
Location: British Columbia
Posts: 84
|
Re: Great Grandpa's Legacy reborn
Wonderful build! May I ask what paint you used on your exhaust manifolds? They look fantastic.
Thanks in advance, BBQ |
03-20-2015, 12:09 AM | #47 |
Registered User
Join Date: Feb 2012
Location: turlock
Posts: 2,177
|
Re: Great Grandpa's Legacy reborn
I usually use eastwood when I use a silver like this such as the master cylinder but unfortunately this was not a high enough temp rate I used and they not look absolutely awful they do offer an exhaust manifold silver paint that is rated that looks amazing I just didn't have it on hand. One of my regrets. Thanks for checking the build out!
__________________
Project NewType 1972 Chevy C/10 Cheyenne Super ( Daily Driven Showtruck ) http://67-72chevytrucks.com/vboard/s...d.php?t=507903 Project Great Grandpa's Legacy 1973 Chevy C/10 Cheyenne ( Current daily driver collecting big time parts ) http://67-72chevytrucks.com/vboard/s...89#post7084289 - Dylan (209)-985-7721 |
03-20-2015, 12:11 AM | #48 |
Registered User
Join Date: Feb 2012
Location: turlock
Posts: 2,177
|
Re: Great Grandpa's Legacy reborn
Appreciate you checking our build out Nate! More to be written this weekend.
__________________
Project NewType 1972 Chevy C/10 Cheyenne Super ( Daily Driven Showtruck ) http://67-72chevytrucks.com/vboard/s...d.php?t=507903 Project Great Grandpa's Legacy 1973 Chevy C/10 Cheyenne ( Current daily driver collecting big time parts ) http://67-72chevytrucks.com/vboard/s...89#post7084289 - Dylan (209)-985-7721 |
03-20-2015, 05:29 PM | #49 |
78K & 79C Jimmys
Join Date: Nov 2009
Location: Ottawa Ont CANADA
Posts: 7,901
|
Re: Great Grandpa's Legacy reborn
It's cool hearing the trucks got history with the family and you've saved it,for another chapter
__________________
John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350 |
03-21-2015, 12:44 AM | #50 |
Registered User
Join Date: Aug 2011
Location: Beattyville, KY
Posts: 53
|
Re: Great Grandpa's Legacy reborn
Clean truck! My vote is on the OEM wheel covers, just suits such a clean original looking truck perfect.
__________________
1980 C10 Silverado LWB. 350/350. Being resuscitated a little at a time. http://67-72chevytrucks.com/vboard/s...d.php?t=655448 |
Bookmarks |
Tags |
c10, cheyenne, great grandpa, reborn, squarebody |
|
|