The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-22-2014, 11:31 PM   #26
CRGRS 66
Registered User
 
CRGRS 66's Avatar
 
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
Re: 350 fan shroud questions.

Sounds good, keep us posted, and put up pictures of your install when you get there. Always interested to see different approaches. I will be interested to see your wiring solution.
__________________
Craigerrr

My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709
CRGRS 66 is offline   Reply With Quote
Old 11-22-2014, 11:37 PM   #27
j.rigby15r
Registered User
 
j.rigby15r's Avatar
 
Join Date: May 2014
Location: Newport News VIRGINIA
Posts: 360
Re: 350 fan shroud questions.

In thinking of doing the Volvo relay with the BMW temp relay. You can find it all on ebay for around $ 40.
j.rigby15r is offline   Reply With Quote
Old 11-23-2014, 12:34 PM   #28
cab_01
Registered User
 
cab_01's Avatar
 
Join Date: May 2013
Location: San Diego
Posts: 67
Re: 350 fan shroud questions.

I personally like the normal clutch fan. It will always work if the motor is running. To me it looks better. Here is the spacer that was talked about.



Here is the shroud. I used aluminum. Was pretty easy to make or you could buy from Summit.
cab_01 is offline   Reply With Quote
Old 11-23-2014, 04:21 PM   #29
64shortbox
Registered User
 
64shortbox's Avatar
 
Join Date: Jan 2011
Location: Tulare, CA
Posts: 733
Re: 350 fan shroud questions.

cab_01, Fantastic job on both your shroud and your fan positioning. 1/2 in and 1/2 out of the opening for best air flow. You do nice work.

I ended up using an electric fan because my truck would get hot here in the San Joaquin Valley during the HOT summers idling in traffic with the A/C on, waiting in the drive through with the A/C on. I needed massive amounts of airflow at idle is the reason I went with an electric. Going down the road I'm fine but idling at 8 or 9 hundred RPM just didn't cut it sitting still in the heat.
64shortbox is offline   Reply With Quote
Old 11-23-2014, 11:20 PM   #30
Kenfuzed
Registered User
 
Kenfuzed's Avatar
 
Join Date: Jun 2014
Location: Glendora CA -> Tampa FL
Posts: 587
Re: 350 fan shroud questions.

I put together the shroud from Summit and it worked out pretty good. I had to do some extra cutting to trim the ring strip down to 2" so the fan wouldn't be buried inside the shroud. The ring strip is 3" wide in the kit but since I have my engine moved to the forward position it needed to be modified.



Even though you went with an electric fan you should still consider some sort of shroud to pull air through the entire radiator.
__________________
1966 C10 Short Fleetside
1988 Sportster, 2008 Street Glide

Ken's 1966 C10 build "Red Ale"
Follow on Instgram: @cv_performance
https://instagram.com/cv_performance
Harley Performance Parts: CV Performance (Harley related)
Enjoying the ride!
Kenfuzed is offline   Reply With Quote
Old 11-24-2014, 06:26 AM   #31
j.rigby15r
Registered User
 
j.rigby15r's Avatar
 
Join Date: May 2014
Location: Newport News VIRGINIA
Posts: 360
Re: 350 fan shroud questions.

I've got a fan shroud coming. The Taurus fan is completely shrouded, if you look at the pictures posted by Shortbox you can see what I'm talking about.
j.rigby15r is offline   Reply With Quote
Old 11-24-2014, 04:51 PM   #32
Kenfuzed
Registered User
 
Kenfuzed's Avatar
 
Join Date: Jun 2014
Location: Glendora CA -> Tampa FL
Posts: 587
Re: 350 fan shroud questions.

Nice, post pics and an update when you install it.
__________________
1966 C10 Short Fleetside
1988 Sportster, 2008 Street Glide

Ken's 1966 C10 build "Red Ale"
Follow on Instgram: @cv_performance
https://instagram.com/cv_performance
Harley Performance Parts: CV Performance (Harley related)
Enjoying the ride!
Kenfuzed is offline   Reply With Quote
Old 11-24-2014, 10:05 PM   #33
cab_01
Registered User
 
cab_01's Avatar
 
Join Date: May 2013
Location: San Diego
Posts: 67
Re: 350 fan shroud questions.

Quote:
Originally Posted by 64shortbox View Post
cab_01, Fantastic job on both your shroud and your fan positioning. 1/2 in and 1/2 out of the opening for best air flow. You do nice work.

I ended up using an electric fan because my truck would get hot here in the San Joaquin Valley during the HOT summers idling in traffic with the A/C on, waiting in the drive through with the A/C on. I needed massive amounts of airflow at idle is the reason I went with an electric. Going down the road I'm fine but idling at 8 or 9 hundred RPM just didn't cut it sitting still in the heat.
Thank you sir. I live in east San Diego county and it gets hot but not like you get up there.
cab_01 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:24 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com