MS Parting Out 72 Blazer - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 10-20-2009, 08:11 PM

I will jump in line for the tilt also...

*1sik52* · 10-20-2009, 08:20 PM

Quote:

Originally Posted by otsenre

4x4? throttle cable

No cable

Quote:

Originally Posted by cmnov

will take the fuse box to top harness for ten dollars shipped.it's complete with plug for top??how would you like to be paid.paypal if i add in the 3% or email me at cmnov12@yahoo.com and let me know. thanks colin

Now this does not come with the actual fuse block. Its where it unplugs from the fuse block and it has the plug to the top harness. Paypal is fine. Paypal my wifes account Bluntiam@aol.com

**JMac11** · 10-20-2009, 08:55 PM

The neck that comes out of the tank. Apparently the aftermarket tank neck is not correctly aimed and it is easier to swap the necks on the tanks. I have my aftermarket tank modified for an intank pump and my original is too nice to hack.

*1sik52* · 10-20-2009, 09:29 PM

Quote:

Originally Posted by JMac11

The neck that comes out of the tank. Apparently the aftermarket tank neck is not correctly aimed and it is easier to swap the necks on the tanks. I have my aftermarket tank modified for an intank pump and my original is too nice to hack.

The tank itself was gone before I bought the Blazer

budder71 · 10-20-2009, 10:18 PM

sounds great !!! I will also take vent window assemblies !! we had our baby girl today so I will be down early next week !!!

*1sik52* · 10-20-2009, 10:33 PM

Quote:

Originally Posted by budder71

sounds great !!! I will also take vent window assemblies !! we had our baby girl today so I will be down early next week !!!

Congrats! I will see you soon.

Rochlow · 10-21-2009, 09:45 AM

Sent you a pm about the steering column. And if the deals fall through on the seats let me know...

cmnov · 10-21-2009, 02:48 PM

will take that wiring harness for the blazer top.it has plugs on ends? ten dollars shipped. paypal?? i'll add the difference or email me please with payment instructions at cmnov12@yahoo.com thanks ,colin

*1sik52* · 10-21-2009, 06:57 PM

Quote:

Originally Posted by cmnov

will take that wiring harness for the blazer top.it has plugs on ends? ten dollars shipped. paypal?? i'll add the difference or email me please with payment instructions at cmnov12@yahoo.com thanks ,colin

Yes, it has plugs on both ends. I sent you a PM with payment instructions.

bossrod · 10-21-2009, 08:03 PM

What color/condition is the steering wheel?

*1sik52* · 10-21-2009, 08:15 PM

Quote:

Originally Posted by bossrod

What color/condition is the steering wheel?

No good at all

dabels23 · 10-22-2009, 09:08 AM

PM sent

*1sik52* · 10-22-2009, 12:58 PM

Updated the main list. If any of these "Pending Deals" fall through I will inform the next person in line

HuggerCST · 10-22-2009, 01:05 PM

Is the RF fender a GM fender? Any pics?

JimmyFloyd · 10-22-2009, 04:05 PM

I need a couple random patches.

I beed one on the inner bed side, by the floor between the door and the wheel well on the driver's side. I also could use the center section of the windshield frame if it is decent (8-12" centered where the mirror would be)

Might need a couple other parts, but that's all I can think of for now. Might consider the under-dash wiring harness if it originally came with gauges.

*1sik52* · 10-22-2009, 04:30 PM

Quote:

Originally Posted by JimmyFloyd

I need a couple random patches.

I beed one on the inner bed side, by the floor between the door and the wheel well on the driver's side. I also could use the center section of the windshield frame if it is decent (8-12" centered where the mirror would be)

Might need a couple other parts, but that's all I can think of for now. Might consider the under-dash wiring harness if it originally came with gauges.

The inner bedside is good.
The windshield frame is toast along with under dash wiring

*1sik52* · 10-22-2009, 07:32 PM

Updated

**WIDESIDE72** · 10-22-2009, 07:40 PM

Is the tilt wheel sold? How about the aluminum grille surround and / or plastic grill insert? Price and condition, as well as shipping to Leander Tx 78641

*1sik52* · 10-22-2009, 07:45 PM

Quote:

Originally Posted by WIDESIDE72

Is the tilt wheel sold? How about the aluminum grille surround and / or plastic grill insert? Price and condition, as well as shipping to Leander Tx 78641

Tilt is Pending. Someone has paid deposit and mailing balance to me.

Dont have any of the Grille

Sorry

budder71 · 10-22-2009, 07:51 PM

I am for SURE going to take the front bucket seats, rear seat, and all hardware to accompany them and the vent window assemblies.. if no one has sent money on the roll bar I will take it as well.. just send me a pm with a total breakdown and total cost and I will send money for everything today if you like and if not I will be down no later than next Tuesday to pick it all up.. thanks again !!!!

*1sik52* · 10-22-2009, 07:55 PM

Quote:

Originally Posted by budder71

I am for SURE going to take the front bucket seats, rear seat, and all hardware to accompany them and the vent window assemblies.. if no one has sent money on the roll bar I will take it as well.. just send me a pm with a total breakdown and total cost and I will send money for everything today if you like and if not I will be down no later than next Tuesday to pick it all up.. thanks again !!!!

Youre good George. Im holding it for you

*1sik52* · 10-23-2009, 02:29 PM

Updated

*1sik52* · 10-23-2009, 09:22 PM

Im putting the wire harness from the fuse block to the blazer top back up for sale if anyone wants it.

budder71 · 10-23-2009, 11:04 PM

hold it for me as well please !!! also if the plate on the interior, just behind drivers shoulder, where you plug it in
is available I want it as well

*1sik52* · 10-24-2009, 08:17 AM

Quote:

Originally Posted by budder71

hold it for me as well please !!! also if the plate on the interior, just behind drivers shoulder, where you plug it in
is available I want it as well

You will have to show me what you are talking about when you get here.

10-20-2009, 08:11 PM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,719	Re: Parting Out 72 Blazer I will jump in line for the tilt also... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-20-2009, 08:55 PM	#3
JMac11 Registered User Join Date: May 2005 Location: Tallahassee Fl Posts: 773	Re: Parting Out 72 Blazer The neck that comes out of the tank. Apparently the aftermarket tank neck is not correctly aimed and it is easier to swap the necks on the tanks. I have my aftermarket tank modified for an intank pump and my original is too nice to hack.

10-20-2009, 10:18 PM	#5
budder71 Registered User Join Date: Jul 2009 Location: Hattiesburg Mississippi Posts: 697	Re: Parting Out 72 Blazer sounds great !!! I will also take vent window assemblies !! we had our baby girl today so I will be down early next week !!!

10-21-2009, 09:45 AM	#7
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Parting Out 72 Blazer Sent you a pm about the steering column. And if the deals fall through on the seats let me know...

10-21-2009, 02:48 PM	#8
cmnov Registered User Join Date: Aug 2007 Location: lexington,ma Posts: 22	Re: Parting Out 72 Blazer will take that wiring harness for the blazer top.it has plugs on ends? ten dollars shipped. paypal?? i'll add the difference or email me please with payment instructions at cmnov12@yahoo.com thanks ,colin

10-21-2009, 08:03 PM	#10
bossrod Registered User Join Date: Feb 2004 Location: Groton, CT Posts: 168	Re: Parting Out 72 Blazer What color/condition is the steering wheel?

10-22-2009, 09:08 AM	#12
dabels23 Registered User Join Date: Sep 2009 Location: Eudora, KS Posts: 131	Re: Parting Out 72 Blazer PM sent

10-22-2009, 12:58 PM	#13
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: Parting Out 72 Blazer Updated the main list. If any of these "Pending Deals" fall through I will inform the next person in line

10-22-2009, 01:05 PM	#14
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: Parting Out 72 Blazer Is the RF fender a GM fender? Any pics? __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

10-22-2009, 04:05 PM	#15
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: Parting Out 72 Blazer I need a couple random patches. I beed one on the inner bed side, by the floor between the door and the wheel well on the driver's side. I also could use the center section of the windshield frame if it is decent (8-12" centered where the mirror would be) Might need a couple other parts, but that's all I can think of for now. Might consider the under-dash wiring harness if it originally came with gauges. __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3

10-22-2009, 07:32 PM	#17
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: Parting Out 72 Blazer Updated

10-22-2009, 07:40 PM	#18
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: Parting Out 72 Blazer Is the tilt wheel sold? How about the aluminum grille surround and / or plastic grill insert? Price and condition, as well as shipping to Leander Tx 78641

10-22-2009, 07:51 PM	#20
budder71 Registered User Join Date: Jul 2009 Location: Hattiesburg Mississippi Posts: 697	Re: Parting Out 72 Blazer I am for SURE going to take the front bucket seats, rear seat, and all hardware to accompany them and the vent window assemblies.. if no one has sent money on the roll bar I will take it as well.. just send me a pm with a total breakdown and total cost and I will send money for everything today if you like and if not I will be down no later than next Tuesday to pick it all up.. thanks again !!!!

10-23-2009, 02:29 PM	#22
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: Parting Out 72 Blazer Updated

10-23-2009, 09:22 PM	#23
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: Parting Out 72 Blazer Im putting the wire harness from the fuse block to the blazer top back up for sale if anyone wants it.



Register or Log In To remove these advertisements.

10-23-2009, 11:04 PM	#24
budder71 Registered User Join Date: Jul 2009 Location: Hattiesburg Mississippi Posts: 697	Re: Parting Out 72 Blazer hold it for me as well please !!! also if the plate on the interior, just behind drivers shoulder, where you plug it in is available I want it as well Last edited by budder71; 10-23-2009 at 11:06 PM. Reason: forgot a question

Register or Log In To remove these advertisements.