Here are some parts I took off a few trucks - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

skunkwerx · 06-18-2007, 09:20 PM

do you have any front fender wheel well trim for 67-68?thanks

teeitup · 06-18-2007, 10:53 PM

Walts, Pm'd you back, Thanks
Uncle, Tim, I'll PM you info
Longhorn Man, Andy, One is nice one is, the other is driver condition. $15 for pair brought to Boss's place
David, $29 shipped for the pair without ALT
Skunkwerx, sorry none right now
Thanks Randy

**D.PASSMORE** · 06-18-2007, 11:39 PM

Ok,
I'll take the two peices and the bottom bolt with the spacer. Don't see your addy in my files, could you send again?

Question: I need the exhaust manifold bolt that a 4x4 dipstick tube mounts up to, got ONE?

Thanks, DP

teeitup · 06-18-2007, 11:45 PM

I'll pm you David, sure bolt and spacer too!!!

Sorry no exhaust manifold bolt
Thanks Randy

OLDIRON69 · 06-19-2007, 08:26 AM

How much for a pair of door sill plate's to 75754

teeitup · 06-19-2007, 08:47 AM

I got is a set of NOS ones on another thread for $20 plus shipping. I do have one used one $5 plus shipping. Thanks Randy

396muncie · 06-19-2007, 10:13 AM

I believe it's pic 27, the lighter socket and red/green wiring. Also, is the red wire beside it the power wire for the radio? If so, how much for the above things shipped to 17520? Thanks

OLDIRON69 · 06-19-2007, 11:55 AM

If you have the new one's I'll take those or a good used pair, how much for one of the shrouds. I need one for my '69 small block truck.

oldschooler · 06-19-2007, 12:31 PM

how much for a non-air heater control? Shipped to 17362. Thanks, Rich

teeitup · 06-19-2007, 01:08 PM

396muncie, the red wire is for another lighter, the green and red wire is for that lighter. $13 shipped for the red/green wire and lighter
Oldiron, The door sills sold on the other thread sorry, I do have one used one left for $5, I have one shroud with a small crack but its not noticeable when mounted, $20 plus shipping, or I got another shroud with no cracks for $25 plus shipping
Oldschooler, Rich, I priced them both to a guy last night for $20 for the pair shipped, they both have had the face screwed back on
Thanks let me know, Randy

IvelDesigns · 06-19-2007, 02:00 PM

how much for one of the non-A/C heater controls shipped to 50325?

How good of shape are they in?

OLDIRON69 · 06-19-2007, 02:24 PM

The door sills you have left..do you have a pair? and I'll take the shroud without a crack for $25.00. I can paypal you the cash, just send me a PM, consider them sold.

semperfidoordie · 06-19-2007, 02:48 PM

how much for the radio and bench seat to 92145?

stynchrr · 06-19-2007, 03:08 PM

What shape is the metal thing that goes over the Ram horn for the heat riser. Did i see some heat sheilds for the spark plugs? Is there a set? 19934
Thanks Tim

67ChevyRedneck · 06-19-2007, 04:05 PM

I see in pic 30 that you have a set of black dash vents. I'm installing a vintage air kit and one of the adapters is oval and both my vents are round (I guess a P.O. swapped the oval one out?)

I really only need the oval one, but I could take both if necessary.

Let me know, thanks. Shipping would be to 29650.

**uncle** · 06-19-2007, 05:14 PM

What's the carb in pic #25. Also ,what year is it from? Is it complete including all the choke pieces? By that, I mean does it have the parts that bolt to the intake and the rod that goes from the carb to the choke. I'll paypal you after your response on the carb. Thanks again.

396muncie · 06-19-2007, 06:14 PM

[QUOTE=teeitup;2229561]396muncie, the red wire is for another lighter, the green and red wire is for that lighter. $13 shipped for the red/green wire and lighter

Sounds good, let me know Paypal info and I'll send payment. Thanks

teeitup · 06-19-2007, 06:20 PM

My camera is acting up so sorry no more pics right now.
Iveldesigns, they both have been screwed together at teh face, $20 for pair shipped
Oldiron, I only got one left, no pairs. I'll get a shipping price asap on shroud
Semper, sorry both have been sold
Stynchrr, Tim, it has some rust, you can kind of see in pic, I'd take another for you but my camera is acting up. $29 shipped for it
67redneck, both of mine are round too, sorry
Uncle, Tim, I just unbolted it from intake, and took off rod that goes to gas pedal. Off a 69 350. $29 shipped
396Muncie, I'll pm you
Thanks Randy

**uncle** · 06-19-2007, 06:46 PM

pm sent.

Longhorn Man · 06-19-2007, 07:23 PM

I'll take the door panels for 15 at Boss's place.
Do you have any of the retainers in chrome?

teeitup · 06-19-2007, 07:32 PM

Tim, Pm'd you back
Andy, I'll set them back for you. I do have a set a chrome retainers $10 for them.
Thanks Randy

IvelDesigns · 06-19-2007, 07:41 PM

Quote:

Originally Posted by teeitup

Iveldesigns, they both have been screwed together at teh face, $20 for pair shipped

do you mean the face has been screwed to the assembly that the cables are in?

Longhorn Man · 06-19-2007, 07:45 PM

cool... 25 bucks then.
See you there!

teeitup · 06-19-2007, 07:56 PM

Ivel, yes thats what is done to one of them, the other has a broken arm too
Andy, sounds good!! Look forward to meeting you!!

Thanks Randy

67ChevyRedneck · 06-20-2007, 01:57 PM

Quote:

Originally Posted by teeitup

67redneck, both of mine are round too, sorry

Thanks. Oh well, I'll make it work somehow

06-18-2007, 09:20 PM	#26
skunkwerx Registered User Join Date: Oct 2006 Location: oklahoma Posts: 238	Re: Here are some parts I took off a few trucks do you have any front fender wheel well trim for 67-68?thanks

06-18-2007, 10:53 PM	#27
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Here are some parts I took off a few trucks Walts, Pm'd you back, Thanks Uncle, Tim, I'll PM you info Longhorn Man, Andy, One is nice one is, the other is driver condition. $15 for pair brought to Boss's place David, $29 shipped for the pair without ALT Skunkwerx, sorry none right now Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-18-2007, 11:39 PM	#28
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,054	Re: Here are some parts I took off a few trucks Ok, I'll take the two peices and the bottom bolt with the spacer. Don't see your addy in my files, could you send again? Question: I need the exhaust manifold bolt that a 4x4 dipstick tube mounts up to, got ONE? Thanks, DP

06-18-2007, 11:45 PM	#29
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Here are some parts I took off a few trucks I'll pm you David, sure bolt and spacer too!!! Sorry no exhaust manifold bolt Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-19-2007, 08:26 AM	#30
OLDIRON69 Registered User Join Date: Mar 2007 Location: Ben Wheeler,Texas Posts: 992	Re: Here are some parts I took off a few trucks How much for a pair of door sill plate's to 75754 __________________ 05 2500HD 6.0 excab 69 LWB-Gone but not forgotten! 68 Dodge Charger 383/727 69 Dodge Charger-440/4spd

06-19-2007, 08:47 AM	#31
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Here are some parts I took off a few trucks I got is a set of NOS ones on another thread for $20 plus shipping. I do have one used one $5 plus shipping. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-19-2007, 10:13 AM	#32
396muncie Registered User Join Date: Sep 2006 Location: Lancaster, PA Posts: 271	Re: Here are some parts I took off a few trucks I believe it's pic 27, the lighter socket and red/green wiring. Also, is the red wire beside it the power wire for the radio? If so, how much for the above things shipped to 17520? Thanks __________________ 70 Custom/10, 396, Muncie 4spd, SWB SOLD 72 Cheyenne K20, 350, Granny 4spd, LWB, daily driver 72 Cheyenne Super C20, 350, Turbo 400, LWB, parts truck for 4WD Cheyenne

06-19-2007, 11:55 AM	#33
OLDIRON69 Registered User Join Date: Mar 2007 Location: Ben Wheeler,Texas Posts: 992	Re: Here are some parts I took off a few trucks If you have the new one's I'll take those or a good used pair, how much for one of the shrouds. I need one for my '69 small block truck. __________________ 05 2500HD 6.0 excab 69 LWB-Gone but not forgotten! 68 Dodge Charger 383/727 69 Dodge Charger-440/4spd

06-19-2007, 12:31 PM	#34
oldschooler Registered User Join Date: Mar 2007 Location: spring grove, Pa. Posts: 538	Re: Here are some parts I took off a few trucks how much for a non-air heater control? Shipped to 17362. Thanks, Rich

06-19-2007, 01:08 PM	#35
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Here are some parts I took off a few trucks 396muncie, the red wire is for another lighter, the green and red wire is for that lighter. $13 shipped for the red/green wire and lighter Oldiron, The door sills sold on the other thread sorry, I do have one used one left for $5, I have one shroud with a small crack but its not noticeable when mounted, $20 plus shipping, or I got another shroud with no cracks for $25 plus shipping Oldschooler, Rich, I priced them both to a guy last night for $20 for the pair shipped, they both have had the face screwed back on Thanks let me know, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 06-19-2007 at 01:11 PM.

06-19-2007, 02:00 PM	#36
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: Here are some parts I took off a few trucks how much for one of the non-A/C heater controls shipped to 50325? How good of shape are they in? __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

06-19-2007, 02:24 PM	#37
OLDIRON69 Registered User Join Date: Mar 2007 Location: Ben Wheeler,Texas Posts: 992	Re: Here are some parts I took off a few trucks The door sills you have left..do you have a pair? and I'll take the shroud without a crack for $25.00. I can paypal you the cash, just send me a PM, consider them sold. __________________ 05 2500HD 6.0 excab 69 LWB-Gone but not forgotten! 68 Dodge Charger 383/727 69 Dodge Charger-440/4spd

06-19-2007, 02:48 PM	#38
semperfidoordie Fix It Till It's Broke Join Date: Apr 2007 Location: 29 Palms, CA Posts: 1,616	Re: Here are some parts I took off a few trucks how much for the radio and bench seat to 92145? __________________ Tony Black Beauty: 85 C-10 SOLD! Great White: 69 LWB Custom Camper/20 SOLD! Blue Dragon: 72 K-10 SOLD! The Tank 77 K-10 KIA panhandler62: Just don't search for "trannys" no matter how hard yours shifts -- you just won't get what you are looking for. I Made The Official So Cal Board Meet

06-19-2007, 03:08 PM	#39
stynchrr Registered User Join Date: Oct 2005 Location: Dover Delaware Posts: 270	Re: Here are some parts I took off a few trucks What shape is the metal thing that goes over the Ram horn for the heat riser. Did i see some heat sheilds for the spark plugs? Is there a set? 19934 Thanks Tim

06-19-2007, 04:05 PM	#40
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Here are some parts I took off a few trucks I see in pic 30 that you have a set of black dash vents. I'm installing a vintage air kit and one of the adapters is oval and both my vents are round (I guess a P.O. swapped the oval one out?) I really only need the oval one, but I could take both if necessary. Let me know, thanks. Shipping would be to 29650. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!



Register or Log In To remove these advertisements.

06-19-2007, 05:14 PM	#41
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,286	Re: Here are some parts I took off a few trucks What's the carb in pic #25. Also ,what year is it from? Is it complete including all the choke pieces? By that, I mean does it have the parts that bolt to the intake and the rod that goes from the carb to the choke. I'll paypal you after your response on the carb. Thanks again.

06-19-2007, 06:14 PM	#42
396muncie Registered User Join Date: Sep 2006 Location: Lancaster, PA Posts: 271	Re: Here are some parts I took off a few trucks [QUOTE=teeitup;2229561]396muncie, the red wire is for another lighter, the green and red wire is for that lighter. $13 shipped for the red/green wire and lighter Sounds good, let me know Paypal info and I'll send payment. Thanks __________________ 70 Custom/10, 396, Muncie 4spd, SWB SOLD 72 Cheyenne K20, 350, Granny 4spd, LWB, daily driver 72 Cheyenne Super C20, 350, Turbo 400, LWB, parts truck for 4WD Cheyenne

06-19-2007, 06:20 PM	#43
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Here are some parts I took off a few trucks My camera is acting up so sorry no more pics right now. Iveldesigns, they both have been screwed together at teh face, $20 for pair shipped Oldiron, I only got one left, no pairs. I'll get a shipping price asap on shroud Semper, sorry both have been sold Stynchrr, Tim, it has some rust, you can kind of see in pic, I'd take another for you but my camera is acting up. $29 shipped for it 67redneck, both of mine are round too, sorry Uncle, Tim, I just unbolted it from intake, and took off rod that goes to gas pedal. Off a 69 350. $29 shipped 396Muncie, I'll pm you Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-19-2007, 06:46 PM	#44
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,286	Re: Here are some parts I took off a few trucks pm sent.

06-19-2007, 07:23 PM	#45
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Here are some parts I took off a few trucks I'll take the door panels for 15 at Boss's place. Do you have any of the retainers in chrome?

06-19-2007, 07:32 PM	#46
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Here are some parts I took off a few trucks Tim, Pm'd you back Andy, I'll set them back for you. I do have a set a chrome retainers $10 for them. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-19-2007, 07:45 PM	#48
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Here are some parts I took off a few trucks cool... 25 bucks then. See you there!

06-19-2007, 07:56 PM	#49
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Here are some parts I took off a few trucks Ivel, yes thats what is done to one of them, the other has a broken arm too Andy, sounds good!! Look forward to meeting you!! Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.