AZ Billet Aluminum Radio Plate - Production Run #2 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

yellowGT · 06-28-2013, 12:54 PM

Quote:

Originally Posted by yellowGT

Tired of not being able to listen to music so I sent payment for a polished one. One thing I did forget was to put my screenname on the notes section.
Posted via Mobile Device

Just checking on status. I noticed you said you have sent out pm's but I haven't gotten one.
Posted via Mobile Device

bowtieboy2 · 08-16-2013, 03:36 PM

Are you producing anymore at this time.Please pm. your phone number to me.THANK YOU.....

**blazercrazy70** · 05-28-2013, 01:21 AM

Almost there come on let's get enough

dapperg · 05-28-2013, 09:29 AM

Quote:

Originally Posted by blazercrazy70

Almost there come on let's get enough

bump!

DaddyO · 05-28-2013, 06:55 PM

I've been out of town. Are there enough people in o this yet?

**blazercrazy70** · 05-29-2013, 06:38 AM

bump

mahanian · 05-29-2013, 12:13 PM

I will check into ordering a smaller quantity, I usually get charged more for anything less than 20 but maybe my machinist will make an exception for me this one time. If so, I'll upgrade my forum membership and start the process. He is a little backed up lately so it may be 5-6 weeks before I get these shipped.

mahanian · 05-29-2013, 09:01 PM

I've placed the order for 15, which was the minimum amount he would machine without raising the price so I'm hoping I'll be able to sell the extras. I will let each of you know when they are ready to ship.

**blazercrazy70** · 05-30-2013, 03:54 AM

Awesome sounds good thanks

knomadd · 05-31-2013, 04:48 PM

Quote:

Originally Posted by mahanian

I've placed the order for 15, which was the minimum amount he would machine without raising the price so I'm hoping I'll be able to sell the extras. I will let each of you know when they are ready to ship.

Awesome!

I can't wait!

bassetlust · 05-30-2013, 05:41 AM

Thank you again, Jared!!!

Tukn69 · 05-30-2013, 11:14 AM

I am intrested.. Please let me know if I can still get in this...

Thank you...

-Robert.

mahanian · 06-02-2013, 01:51 PM

Quote:

Originally Posted by Tukn69

I am intrested.. Please let me know if I can still get in this...

Thank you...

-Robert.

Yes, I bought 5 extras to meet the minimum so if you want one please see the first post in this thread for payment information. Thanks

Tukn69 · 06-03-2013, 05:10 PM

Quote:

Originally Posted by mahanian

Yes, I bought 5 extras to meet the minimum so if you want one please see the first post in this thread for payment information. Thanks

Just submitted via paypal for a polished plate...

Thank you...

-Robert

rickairbound1 · 06-02-2013, 05:53 PM

I don't have a paypal account. How do I get the 95 buck to you?

Rick

tinlid · 06-03-2013, 09:40 AM

Just sent $95 for a polished one. Dang, they are nice!

rickairbound1 · 06-05-2013, 09:56 PM

I want one. Not sure how to pay through this venue... HELP
Rick

Tukn69 · 06-06-2013, 10:54 AM

Quote:

Originally Posted by rickairbound1

I want one. Not sure how to pay through this venue... HELP
Rick

I know you mentioned that you didnt have a Paypal acct, but they are free and easy to sign up. That is the way I was able to submit payment.

htthttps://www.paypal.com/us/cgi-bin/we...c17bd6c7fe2f56

Thank you.

-Robert

rickairbound1 · 06-06-2013, 01:49 PM

I'll set one up tonight. How do I direct payment to a particular person or addressee?

Rick

Tukn69 · 06-06-2013, 02:23 PM

Quote:

Originally Posted by rickairbound1

I'll set one up tonight. How do I direct payment to a particular person or addressee?

Rick

Refer to the first page for email address. Good luck.

Thanks

-Robert
Posted via Mobile Device

tinlid · 06-06-2013, 02:09 PM

You send the money to the persons e-mail address. I have cash in my pay-pal but from what I have seen, you can pay thru pay-pal with a credit card.

mahanian · 06-06-2013, 06:26 PM

Thanks for helping out the other members with setting up a paypal account, I've been away from the board for a few days.

Just an update, I'm picking up the parts today and dropping them off at the polisher tomorrow or Saturday. It usually takes him 2 weeks to get them done, hopefully sooner though.

I still have several left if anyone would like one

Tukn69 · 06-07-2013, 01:09 AM

Quote:

Originally Posted by mahanian

Thanks for helping out the other members with setting up a paypal account, I've been away from the board for a few days.

Just an update, I'm picking up the parts today and dropping them off at the polisher tomorrow or Saturday. It usually takes him 2 weeks to get them done, hopefully sooner though.

I still have several left if anyone would like one

np! Glad to help when I can..

Thanks

-Robert

knomadd · 06-07-2013, 09:36 AM

That's great news Jared! I can't wait

muckmuck · 06-07-2013, 08:49 PM

Am I too late?? Hope not. Let me know and I will pay by paypal. Thanks!
Posted via Mobile Device

05-28-2013, 01:21 AM	#3
blazercrazy70 Senior Member Join Date: Sep 2006 Location: illinois Posts: 516	Re: Billet Aluminum Radio Plate - Production Run #2 Almost there come on let's get enough

05-28-2013, 06:55 PM	#5
DaddyO Registered User Join Date: Oct 2007 Location: Houston, TX Posts: 141	Re: Billet Aluminum Radio Plate - Production Run #2 I've been out of town. Are there enough people in o this yet?

05-29-2013, 06:38 AM	#6
blazercrazy70 Senior Member Join Date: Sep 2006 Location: illinois Posts: 516	Re: Billet Aluminum Radio Plate - Production Run #2 bump

05-29-2013, 12:13 PM	#7
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Billet Aluminum Radio Plate - Production Run #2 I will check into ordering a smaller quantity, I usually get charged more for anything less than 20 but maybe my machinist will make an exception for me this one time. If so, I'll upgrade my forum membership and start the process. He is a little backed up lately so it may be 5-6 weeks before I get these shipped. __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

05-29-2013, 09:01 PM	#8
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Billet Aluminum Radio Plate - Production Run #2 I've placed the order for 15, which was the minimum amount he would machine without raising the price so I'm hoping I'll be able to sell the extras. I will let each of you know when they are ready to ship. __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

08-16-2013, 03:36 PM	#2
bowtieboy2 Registered User Join Date: Jul 2012 Location: mt.washington,ky Posts: 13	Re: Billet Aluminum Radio Plate - Production Run #2 Are you producing anymore at this time.Please pm. your phone number to me.THANK YOU.....

05-30-2013, 03:54 AM	#9
blazercrazy70 Senior Member Join Date: Sep 2006 Location: illinois Posts: 516	Re: Billet Aluminum Radio Plate - Production Run #2 Awesome sounds good thanks

05-30-2013, 05:41 AM	#11
bassetlust Registered User Join Date: Apr 2013 Location: Lady Lake, Florida Posts: 34	Re: Billet Aluminum Radio Plate - Production Run #2 Thank you again, Jared!!!

05-30-2013, 11:14 AM	#12
Tukn69 Registered User Join Date: May 2013 Location: Upland, California Posts: 31	Re: Billet Aluminum Radio Plate - Production Run #2 I am intrested.. Please let me know if I can still get in this... Thank you... -Robert.

06-02-2013, 05:53 PM	#15
rickairbound1 Registered User Join Date: Aug 2011 Location: San Antonio, TX Posts: 90	Re: Billet Aluminum Radio Plate - Production Run #2 I don't have a paypal account. How do I get the 95 buck to you? Rick

06-03-2013, 09:40 AM	#16
tinlid Registered User Join Date: Nov 2008 Location: Englewood, CO Posts: 95	Re: Billet Aluminum Radio Plate - Production Run #2 Just sent $95 for a polished one. Dang, they are nice!

06-05-2013, 09:56 PM	#17
rickairbound1 Registered User Join Date: Aug 2011 Location: San Antonio, TX Posts: 90	Re: Billet Aluminum Radio Plate - Production Run #2 I want one. Not sure how to pay through this venue... HELP Rick

06-06-2013, 01:49 PM	#19
rickairbound1 Registered User Join Date: Aug 2011 Location: San Antonio, TX Posts: 90	Re: Billet Aluminum Radio Plate - Production Run #2 I'll set one up tonight. How do I direct payment to a particular person or addressee? Rick

06-06-2013, 02:09 PM	#21
tinlid Registered User Join Date: Nov 2008 Location: Englewood, CO Posts: 95	Re: Billet Aluminum Radio Plate - Production Run #2 You send the money to the persons e-mail address. I have cash in my pay-pal but from what I have seen, you can pay thru pay-pal with a credit card.

06-06-2013, 06:26 PM	#22
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Billet Aluminum Radio Plate - Production Run #2 Thanks for helping out the other members with setting up a paypal account, I've been away from the board for a few days. Just an update, I'm picking up the parts today and dropping them off at the polisher tomorrow or Saturday. It usually takes him 2 weeks to get them done, hopefully sooner though. I still have several left if anyone would like one __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS



Register or Log In To remove these advertisements.

06-07-2013, 09:36 AM	#24
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: Billet Aluminum Radio Plate - Production Run #2 That's great news Jared! I can't wait __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)

06-07-2013, 08:49 PM	#25
muckmuck Junior Member Join Date: Apr 2005 Location: Henderson, NV Posts: 329	Re: Billet Aluminum Radio Plate - Production Run #2 Am I too late?? Hope not. Let me know and I will pay by paypal. Thanks! Posted via Mobile Device

Register or Log In To remove these advertisements.