67 gmc 4x4 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

75gmc454 · 02-03-2011, 11:39 PM

Here are some more pictures. The first is the carpet around the shifters. Can you buy it already cut like this?

The next is the wood in the bed:

This is the drivers side. Dont you love the green door. The original door is in the back.

The last pic is the rear springs. The two leaf kind?

If you want to see any more pics let me know.

67chevy1series · 02-03-2011, 11:41 PM

why was the driver door taken off???

75gmc454 · 02-03-2011, 11:43 PM

Thanks for the info Rick, and everybody's comments. I am missing that mirror and the choke knob. Also the drivers side seatbelt.

75gmc454 · 02-03-2011, 11:44 PM

The previous owner must have had the door open and backed up and sprung the door backwards. I may be able to fix it, but not sure.

67chevy1series · 02-03-2011, 11:45 PM

yes the seat belts are one year only as well i knew i was forgeting somthin...well i found out the hard way so i always tell all the new 67 owners you are also missing a cigarette lighter knob

bfay17 · 02-03-2011, 11:47 PM

I believe the 67-68 had the 2 leaf rear springs. Im not 100% certain though.

teeitup · 02-03-2011, 11:49 PM

Yes my 67 4x4 has 2 leaf rear springs

75gmc454 · 02-03-2011, 11:51 PM

That is good to know that the springs are right.
Here is a pic of the belts:

A better pic of the front:

67chevylongbed · 02-04-2011, 12:06 AM

Looks like a great project.

67chevy1series · 02-04-2011, 12:09 AM

you have a middle seat belt!!!!! wow amzingly hard to find for a 67 you have a gmc so you need the 67 seat belts with no bow tie on them unless you grind it off and make it smooth like a gmc one....

chewychevy67 · 02-04-2011, 12:27 AM

Now im even more jealous. i love the front of the 67 gmc's especially the bumper guards. your truck is definately a good start for a project.

**Bob B.** · 02-04-2011, 12:35 AM

Naturally I like it! I think you will find the GMC V-6 makes a great off road engine. Loads of torque at low r.p.m.'s. Correct on the 2 leaf tapered rear springs. The right valve cover does come very close to the firewall. In fact, the shop manual says to put the #6 cylinder on the exhaust stroke before you try to remove it. There is a 'sweet spot', when you find it the valve cover comes right off.

If you don't already know, here is the greatest collection of GMC V-6 experts known to man:

http://www.6066gmcguy.org/

Great truck, good luck with it.

vectorit · 02-04-2011, 12:49 AM

Please keep sharing photo's! That thing is a gold mine of things to document, since it hasn't been messed with too much.

I'm interested in the drive train in particular.
Axles, engine, trans, and t-case.

Save that carpet, and have a new one made using that one as a template.
The t-case rubber boot is not reproduced in the original style like that, so if it is still good enough to save then I recommend it.

67/68 Stuff like that is only reproduced in a generic fit all style, which to me is frustrating when vendors tout things as being correct when they are in fact not.

75gmc454 · 02-04-2011, 12:55 AM

Glad to see all of the replies. Keep them coming.

I will gladly take any pictures that anyone wants to see. Thanks for all of the ideas on the interior pieces. I will save all that I can for a template.

67chevy1series · 02-04-2011, 01:11 AM

well any pics of the back?

75gmc454 · 02-04-2011, 01:59 AM

Sorry Rick, I don't have any pics of the back yet. My camera died because I had the flash on inside the shop. I will get some pics tomorrow.
Here are two other pics:

Here is a pic of that mount that has been welded:

67chevy1series · 02-04-2011, 02:11 AM

its fine when ewver you get a chance this truck rene ans landonl 's trucks are the coolest ones on the board

Vintage Windmills · 02-04-2011, 02:18 AM

Quote:

Originally Posted by bfay17

I believe the 67-68 had the 2 leaf rear springs. Im not 100% certain though.

My 67 K15 4x4 has 6 leafs. Yes, 6 per side in the back and 3 per side in the front. Its a lwb though.

jud

75gmc454 · 02-04-2011, 11:54 PM

Here are a few more pics I still have not had a chance to get a pic of the tailgate and rear bumper, but I will tomorrow.

67chevy1series · 02-05-2011, 12:12 AM

i wished youy closer i would go get some clr and wash down your whole truck that stuff does miracles for patina'd trucks! this truck is gorgeous any pics we havent seen post em !

CORSAIR · 02-05-2011, 12:29 AM

*****en truck I am curently prowling for the exact truck congrats. What size wheels are on it? it looks like some wheel i have been looking for?

75gmc454 · 02-05-2011, 12:35 AM

Corsair the rims are just regular 15 inch steel rims. I guess the 67 half tons had 15 inch rims. I want to find some original full hubcaps with the black center and the white letters.

Rick the truck has been painted. After I started looking more closely I see that the top was painted white when it was new, and the bottom was a metallic blue. It is the same color that you see on the dash.
At one time someone paited the lower portion of the truck white too (under the side chrome which is missing). I can see where the overspray hit the back of the cab and the front of the bed, but there is blue under that paint. On the top the white is the first layer.

67chevy1series · 02-05-2011, 12:39 AM

oh well maybe you do it back original style? i never did like the white under our 67-8 trim

Husker · 02-05-2011, 12:40 AM

Nice start, I like it.
Ron

75gmc454 · 02-05-2011, 12:48 AM

Yeah I think just the top was white, the rest of the truck was blue. Eventually I will repaint it. Right now im just fixing a few little things to get it ready to drive some. I'm checking the joints, the fluid levels in everything, cleaning out the cowl, and working on the carburator.

02-03-2011, 11:39 PM	#26
75gmc454 Registered User Join Date: Oct 2006 Location: MS Posts: 479	Re: 67 gmc 4x4 Here are some more pictures. The first is the carpet around the shifters. Can you buy it already cut like this? The next is the wood in the bed: This is the drivers side. Dont you love the green door. The original door is in the back. The last pic is the rear springs. The two leaf kind? If you want to see any more pics let me know.

02-03-2011, 11:41 PM	#27
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 67 gmc 4x4 why was the driver door taken off???

02-03-2011, 11:43 PM	#28
75gmc454 Registered User Join Date: Oct 2006 Location: MS Posts: 479	Re: 67 gmc 4x4 Thanks for the info Rick, and everybody's comments. I am missing that mirror and the choke knob. Also the drivers side seatbelt.

02-03-2011, 11:44 PM	#29
75gmc454 Registered User Join Date: Oct 2006 Location: MS Posts: 479	Re: 67 gmc 4x4 The previous owner must have had the door open and backed up and sprung the door backwards. I may be able to fix it, but not sure.

02-03-2011, 11:45 PM	#30
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 67 gmc 4x4 yes the seat belts are one year only as well i knew i was forgeting somthin...well i found out the hard way so i always tell all the new 67 owners you are also missing a cigarette lighter knob

02-03-2011, 11:47 PM	#31
bfay17 Young Gun Join Date: Aug 2008 Location: Waupaca, Wi Posts: 192	Re: 67 gmc 4x4 I believe the 67-68 had the 2 leaf rear springs. Im not 100% certain though. __________________ 1968 chevy c10 soon to have 454 and turbo 4006 1970 custom/20 4x4 454/sm465/np205 around 7 inches of lift with 36's. 1992 2wd sierra 5.7 with edelbrock intake, headers, and a Chip. Posi rear with 235/75/15 tires. Soon to have a few more upgrades 2003 ccsb 1500hd

02-03-2011, 11:49 PM	#32
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 67 gmc 4x4 Yes my 67 4x4 has 2 leaf rear springs __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 02-03-2011 at 11:49 PM.

02-03-2011, 11:51 PM	#33
75gmc454 Registered User Join Date: Oct 2006 Location: MS Posts: 479	Re: 67 gmc 4x4 That is good to know that the springs are right. Here is a pic of the belts: A better pic of the front:

02-04-2011, 12:06 AM	#34
67chevylongbed Registered User Join Date: May 2009 Location: Carmichael, California Posts: 576	Re: 67 gmc 4x4 Looks like a great project. __________________ Eric 1967 C10 LWB SOLD.... 1995 Ford F-250 4x4 Powerstroke, 342k "Each generation goes further than the generation preceding it because it stands on the shoulders of that generation. You will have opportunities beyond anything we've ever known." -Ronald Reagan

02-04-2011, 12:09 AM	#35
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 67 gmc 4x4 you have a middle seat belt!!!!! wow amzingly hard to find for a 67 you have a gmc so you need the 67 seat belts with no bow tie on them unless you grind it off and make it smooth like a gmc one....

02-04-2011, 12:27 AM	#36
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,535	Re: 67 gmc 4x4 Now im even more jealous. i love the front of the 67 gmc's especially the bumper guards. your truck is definately a good start for a project.

02-04-2011, 12:35 AM	#37
Bob B. Senior Member Join Date: Aug 2005 Location: Los Angeles Posts: 1,348	Re: 67 gmc 4x4 Naturally I like it! I think you will find the GMC V-6 makes a great off road engine. Loads of torque at low r.p.m.'s. Correct on the 2 leaf tapered rear springs. The right valve cover does come very close to the firewall. In fact, the shop manual says to put the #6 cylinder on the exhaust stroke before you try to remove it. There is a 'sweet spot', when you find it the valve cover comes right off. If you don't already know, here is the greatest collection of GMC V-6 experts known to man: http://www.6066gmcguy.org/ Great truck, good luck with it. __________________ 1967 GMC CM-2500 Camper Cruiser, 351E V-6, NP 435 4 speed, Dana 60, and factory A/C. 2012 GMC K-3500 WT regular cab, 6.0L Vortec, 6L90.

02-04-2011, 12:49 AM	#38
vectorit What? Join Date: Jun 2007 Location: Southern California Posts: 7,617	Re: 67 gmc 4x4 Please keep sharing photo's! That thing is a gold mine of things to document, since it hasn't been messed with too much. I'm interested in the drive train in particular. Axles, engine, trans, and t-case. Save that carpet, and have a new one made using that one as a template. The t-case rubber boot is not reproduced in the original style like that, so if it is still good enough to save then I recommend it. 67/68 Stuff like that is only reproduced in a generic fit all style, which to me is frustrating when vendors tout things as being correct when they are in fact not. __________________ Chris 1968 K20 Suburban 1972 K10 LWB PU

02-04-2011, 12:55 AM	#39
75gmc454 Registered User Join Date: Oct 2006 Location: MS Posts: 479	Re: 67 gmc 4x4 Glad to see all of the replies. Keep them coming. I will gladly take any pictures that anyone wants to see. Thanks for all of the ideas on the interior pieces. I will save all that I can for a template.

02-04-2011, 01:11 AM	#40
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 67 gmc 4x4 well any pics of the back?



Register or Log In To remove these advertisements.

02-04-2011, 01:59 AM	#41
75gmc454 Registered User Join Date: Oct 2006 Location: MS Posts: 479	Re: 67 gmc 4x4 Sorry Rick, I don't have any pics of the back yet. My camera died because I had the flash on inside the shop. I will get some pics tomorrow. Here are two other pics: Here is a pic of that mount that has been welded:

02-04-2011, 02:11 AM	#42
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 67 gmc 4x4 its fine when ewver you get a chance this truck rene ans landonl 's trucks are the coolest ones on the board

02-04-2011, 11:54 PM	#44
75gmc454 Registered User Join Date: Oct 2006 Location: MS Posts: 479	Re: 67 gmc 4x4 Here are a few more pics I still have not had a chance to get a pic of the tailgate and rear bumper, but I will tomorrow.

02-05-2011, 12:12 AM	#45
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 67 gmc 4x4 i wished youy closer i would go get some clr and wash down your whole truck that stuff does miracles for patina'd trucks! this truck is gorgeous any pics we havent seen post em !

02-05-2011, 12:29 AM	#46
CORSAIR Registered User Join Date: Dec 2010 Location: Pahrump, Nevada Posts: 451	Re: 67 gmc 4x4 *****en truck I am curently prowling for the exact truck congrats. What size wheels are on it? it looks like some wheel i have been looking for? __________________ "The Can't Family Lives Across The Street"

02-05-2011, 12:35 AM	#47
75gmc454 Registered User Join Date: Oct 2006 Location: MS Posts: 479	Re: 67 gmc 4x4 Corsair the rims are just regular 15 inch steel rims. I guess the 67 half tons had 15 inch rims. I want to find some original full hubcaps with the black center and the white letters. Rick the truck has been painted. After I started looking more closely I see that the top was painted white when it was new, and the bottom was a metallic blue. It is the same color that you see on the dash. At one time someone paited the lower portion of the truck white too (under the side chrome which is missing). I can see where the overspray hit the back of the cab and the front of the bed, but there is blue under that paint. On the top the white is the first layer. Last edited by 75gmc454; 02-05-2011 at 12:36 AM.

02-05-2011, 12:39 AM	#48
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 67 gmc 4x4 oh well maybe you do it back original style? i never did like the white under our 67-8 trim

02-05-2011, 12:40 AM	#49
Husker Registered User Join Date: Dec 1999 Location: Mid NE USA Posts: 2,212	Re: 67 gmc 4x4 Nice start, I like it. Ron __________________ Member #111 68 C-10 Daily Driver 70 4x4 Project 76 Jeep CJ-5 Help Support the Board: http://67-72chevytrucks.com/vboard/payments.php He who knows nothing is closer to the truth than he whose mind is filled with falsehoods and errors. Thomas Jefferson

02-05-2011, 12:48 AM	#50
75gmc454 Registered User Join Date: Oct 2006 Location: MS Posts: 479	Re: 67 gmc 4x4 Yeah I think just the top was white, the rest of the truck was blue. Eventually I will repaint it. Right now im just fixing a few little things to get it ready to drive some. I'm checking the joints, the fluid levels in everything, cleaning out the cowl, and working on the carburator.

Register or Log In To remove these advertisements.