OR Parting out 72 K10 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**burb71** · 04-28-2012, 03:28 AM

I'll take the drivers side vent window

Leroy-B1 · 04-28-2012, 06:50 AM

Tom how much for the ignition and locks and are they keyed the same...also give me a price with green vents shipped with locks

**DeadheadNM** · 04-28-2012, 07:32 AM

I'll take the defrost vents if no cracks.....will square up from Canada today or tomorrow if that's ok. Shipping? Thanks Tom, Pete

WETOWM · 04-28-2012, 08:23 AM

Ok iwill take the brake shilds and the transmission adapter mounts let me know a total with shiping to 63125 and payment type thanks rich ...

hot trux · 04-28-2012, 01:43 PM

price on front and rear spring mounts for front springs to 63361 ( can cut more of frame off) thanks

hot trux · 05-08-2012, 12:54 AM

Quote:

Originally Posted by hot trux

price on front and rear spring mounts for front springs to 63361 ( can cut more of frame off) thanks

sorry for delay , just realized i'll need the engine crossmember. Package deal on previous mentioned spring mounts Front and crossmember please. thanks

**tll74** · 05-08-2012, 02:30 AM

Quote:

Originally Posted by burb71

Payment sent for drivers side vent

Thanks!

Quote:

Originally Posted by 47thriftmaster

The Jimmy you plan on parting, does it have the original engine in it? If so would be interested what the date code on it is, looking for V0530TDR. I know it's a long shot but gotta try.

I was only able to check two trucks today and they are TFJ and TDJ. Still have a couple more to look at.

Quote:

Originally Posted by hot trux

sorry for delay , just realized i'll need the engine crossmember. Package deal on previous mentioned spring mounts Front and crossmember please. thanks

I'll get a new shipping cost.

Thanks, Tom

**tll74** · 05-08-2012, 04:42 PM

Quote:

Originally Posted by hot trux

sorry for delay , just realized i'll need the engine crossmember. Package deal on previous mentioned spring mounts Front and crossmember please. thanks

Shipping creeps up to 41.00. so...120.00 + 75.00 + 41.00 = 236.00
package deal 225.00 shipped.
Thanks, Tom

**72tutone** · 05-08-2012, 05:35 PM

Trailing arms by chance?

hot trux · 05-08-2012, 09:57 PM

Quote:

Originally Posted by tll74

Shipping creeps up to 41.00. so...120.00 + 75.00 + 41.00 = 236.00
package deal 225.00 shipped.
Thanks, Tom

I'll do that, thanks, paypal okay?

**tll74** · 05-09-2012, 02:08 AM

Quote:

Originally Posted by 47thriftmaster

The Jimmy you plan on parting, does it have the original engine in it? If so would be interested what the date code on it is, looking for V0530TDR. I know it's a long shot but gotta try.

I checked two more and no dice. TBA and TXD. I have 4 more to check.

Quote:

Originally Posted by 1tuff71

you ever come across any axle truss's ?

Not very often and none right now.

Quote:

Originally Posted by 72tutone

Trailing arms by chance?

Are you talking about 2wd coil spring trailing arms? If so yes I do. Post 15 in this thread http://67-72chevytrucks.com/vboard/s...d.php?t=516049

Quote:

Originally Posted by hot trux

I'll do that, thanks, paypal okay?

PM sent

Thanks to all, Tom

*sharpie1972* · 04-28-2012, 03:33 PM

Gary and I have agreed on a price split for the 4x4 shifter and parts. I'll send a PM for payment details. Thanks, Sharpie

**tll74** · 04-28-2012, 04:52 PM

Quote:

Originally Posted by VA72C10

I'm guessing this got missed?

23803 business zip or 23112 home

Sorry Jonathan, yes I did! My post after yours finished that page and till now had not been back to it. The LH looks to sold but I have many more. I'll get you a shipping cost. Sorry for the oversight. 17.50 shipping to the bus addy. Thanks, Tom

Quote:

Originally Posted by hot trux

price on front and rear spring mounts for front springs to 63361 ( can cut more of frame off) thanks

I would separate them from the frame and leave the support mount on each front one. 120.00 for the front and rear parts. 32.83 shipping to a residence. To a bussiness is 28.73

Quote:

Originally Posted by sharpie1972

Gary and I have agreed on a price split for the 4x4 shifter and parts. I'll send a PM for payment details. Thanks, Sharpie

PM sent

hot trux · 04-30-2012, 10:17 AM

Quote:

Originally Posted by tll74

Sorry Jonathan, yes I did! My post after yours finished that page and till now had not been back to it. The LH looks to sold but I have many more. I'll get you a shipping cost. Sorry for the oversight. 17.50 shipping to the bus addy. Thanks, Tom

I would separate them from the frame and leave the support mount on each front one. 120.00 for the front and rear parts. 32.83 shipping to a residence. To a bussiness is 28.73

PM sent

That's every thing to mount front springs to a 2wd. Chassis, correct? Front springs available?
Posted via Mobile Device

**DeadheadNM** · 04-28-2012, 05:21 PM

If Leroy-B1 passes I'll take them if the color matches between the two. No rush. Thanks.

VA72C10 · 04-28-2012, 06:18 PM

as long as I can get a nice matching set with decent rubber like these....

**tll74** · 04-28-2012, 11:58 PM

Pete, yes the color matches. We'll see what he decides.

Jonathan, No problem I have lots of them. I'll round up another LH.

Thanks, Tom

Leroy-B1 · 04-29-2012, 09:14 AM

Tom I will pass vents to Pete....will wait on truck locks as that is what I need

**DeadheadNM** · 04-29-2012, 12:39 PM

Quote:

Originally Posted by Leroy-B1

Tom I will pass vents to Pete....will wait on truck locks as that is what I need

Thanks Leroy - didn't see that you were first up on these earlier. Tom, payment sent. Pete

dave666693 · 04-29-2012, 01:53 PM

If the fan shroud is still available I will take it pending a shipping cost. 98188 business. Thanks
Are the tires for sale? Size and condition?

**tll74** · 04-29-2012, 04:19 PM

Quote:

Originally Posted by dave666693

If the fan shroud is still available I will take it pending a shipping cost. 98188 business. Thanks
Are the tires for sale? Size and condition?

18.00 shipping. I sold the tires and wheels at the Portland Swap meet. Tires were nothing to write home about but the wheels were nice black 16's. Thanks, Tom

dave666693 · 04-29-2012, 04:22 PM

ok-send me your paypal info for the schroud

70cst10_05 · 04-30-2012, 04:07 PM

Are you selling the front driveshaft? Interested in shipping to 66416.

Thanks,
Kevin

**tll74** · 04-30-2012, 05:20 PM

Quote:

Originally Posted by hot trux

That's every thing to mount front springs to a 2wd. Chassis, correct? Front springs available?
Posted via Mobile Device

Yes, I believe so. The front springs in this truck were sold locally. I have two sets in other trucks waiting to be parted. They are the stock springs. 125.00 plus shipping

Quote:

Originally Posted by 70cst10_05

Are you selling the front driveshaft? Interested in shipping to 66416.

Thanks,
Kevin

Kevin.. Yes, 125.00 plus 21.37 shipping.

BuildinA68 · 04-30-2012, 09:32 PM

I will take all 4 spring mounts for the rear. Shipping sounds good. Just pm me about the pp info.

Thanks
Ryan
Posted via Mobile Device

04-28-2012, 03:28 AM	#1
burb71 Active Member Join Date: Oct 2002 Location: Ft. Myers, Fl Posts: 1,716	Re: Parting out 72 K10 I'll take the drivers side vent window

04-28-2012, 06:50 AM	#2
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: Parting out 72 K10 Tom how much for the ignition and locks and are they keyed the same...also give me a price with green vents shipped with locks

04-28-2012, 07:32 AM	#3
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,364	Re: Parting out 72 K10 I'll take the defrost vents if no cracks.....will square up from Canada today or tomorrow if that's ok. Shipping? Thanks Tom, Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

04-28-2012, 08:23 AM	#4
WETOWM Registered User Join Date: Jun 2011 Location: ST LOUIS MO Posts: 2,107	Re: Parting out 72 K10 Ok iwill take the brake shilds and the transmission adapter mounts let me know a total with shiping to 63125 and payment type thanks rich ...

04-28-2012, 01:43 PM	#5
hot trux '85 Stepside Join Date: Jan 2006 Location: montgomery city mo. Posts: 360	Re: Parting out 72 K10 price on front and rear spring mounts for front springs to 63361 ( can cut more of frame off) thanks

05-08-2012, 05:35 PM	#9
72tutone Senior Member Join Date: May 2010 Location: St.Louis Posts: 635	Re: Parting out 72 K10 Trailing arms by chance?

04-28-2012, 03:33 PM	#12
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Parting out 72 K10 Gary and I have agreed on a price split for the 4x4 shifter and parts. I'll send a PM for payment details. Thanks, Sharpie

04-28-2012, 05:21 PM	#15
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,364	Re: Parting out 72 K10 If Leroy-B1 passes I'll take them if the color matches between the two. No rush. Thanks. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

04-28-2012, 06:18 PM	#16
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Parting out 72 K10 as long as I can get a nice matching set with decent rubber like these.... __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-28-2012, 11:58 PM	#17
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting out 72 K10 Pete, yes the color matches. We'll see what he decides. Jonathan, No problem I have lots of them. I'll round up another LH. Thanks, Tom __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

04-29-2012, 09:14 AM	#18
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: Parting out 72 K10 Tom I will pass vents to Pete....will wait on truck locks as that is what I need

04-29-2012, 01:53 PM	#20
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 899	Re: Parting out 72 K10 If the fan shroud is still available I will take it pending a shipping cost. 98188 business. Thanks Are the tires for sale? Size and condition? __________________ 67 C20/ 68 C10 stepside/inline 250--current project 71 GMC 4x4 70 Blazer project-Zombie assault vehicle 67 4x4 Burb

04-29-2012, 04:22 PM	#22
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 899	Re: Parting out 72 K10 ok-send me your paypal info for the schroud __________________ 67 C20/ 68 C10 stepside/inline 250--current project 71 GMC 4x4 70 Blazer project-Zombie assault vehicle 67 4x4 Burb

04-30-2012, 04:07 PM	#23
70cst10_05 Registered User Join Date: Dec 2002 Location: Summerfield, Ks Posts: 742	Re: Parting out 72 K10 Are you selling the front driveshaft? Interested in shipping to 66416. Thanks, Kevin __________________ 1970 Chevy CST/10 1970 Chevy CST/10 1972 Chevy C/10 1972 Chevy Suburban K/10 2019 Silverado 2500 Duramax Kevin

04-30-2012, 09:32 PM	#25
BuildinA68 Registered User Join Date: Mar 2011 Location: Goode, VA Posts: 159	Re: Parting out 72 K10 I will take all 4 spring mounts for the rear. Shipping sounds good. Just pm me about the pp info. Thanks Ryan Posted via Mobile Device __________________ Ryan



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.