Pieces - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Palf70Step** · 01-01-2007, 08:21 PM

I figure I would try my hand at this and try to keep more of a running log of things of what is happening to the pile of "Pieces" that is my old 70 stepside. This weekend I got a good bit done, so I'll start the thread from there.

Saturday I had finished stripping and painting the rear part of the frame. I decided to pull out the trailing arms and panhard rod to put new bushings in them. After I pulled them. I soaked them in oven-cleaner, then pressure washed the oil and grime from the trailing arms. Prepped and painted everything with Eastwood Rust Encapsulator.

01-01-2007, 08:21 PM	#1
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,086	Pieces I figure I would try my hand at this and try to keep more of a running log of things of what is happening to the pile of "Pieces" that is my old 70 stepside. This weekend I got a good bit done, so I'll start the thread from there. Saturday I had finished stripping and painting the rear part of the frame. I decided to pull out the trailing arms and panhard rod to put new bushings in them. After I pulled them. I soaked them in oven-cleaner, then pressure washed the oil and grime from the trailing arms. Prepped and painted everything with Eastwood Rust Encapsulator. Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 07-27-2012 at 04:38 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.