PROJECT: 1950 Chevy 3/4T 4x4... new member - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

N2BOOST · 08-08-2010, 12:14 AM

Thank you very much Joe!!! I really did not plan on trying so hard to straighten everything, but when I got started on it I decided to give it the best I can and if it isn't perfect then at least I can say I tried.

Thank you guys for the support!!

P.S.... I already decided the next phase will be 4 linking the rear and maybe the front, then possibly put twin turbos on it. If I decide to do that I will place the turbos in the fenders basically behind the headlights then plumbing the exhaust back in toward the frame and firewall, BUT that's a long ways away!

N2BOOST · 08-14-2010, 07:43 PM

Went shopping today at LMC! For once I have a project that I can get parts locally! Got all new weatherstripping and window seals for the entire truck, new windshields, new rear sliding window, glove box, splash panels between running boards and bed, S.S. locking gas cap and some other things. Bodywork is almost completed on everything except the hood, cab and chassis!

vk_chevy · 09-29-2010, 02:16 AM

looking forward to see more progress pics

propanemudtruck · 09-29-2010, 12:07 PM

Do you still plan on hauling a gooseneck with it when you're done? That would officially be the coolest hauler I've ever seen!

N2BOOST · 09-29-2010, 09:24 PM

Sorry I have no updates. I lost my job and started a new one so I had to fix up a car to drive since my old job supplied me a vehicle. I am almost done with sanding the hood, then I'll get the chassis and cab blasted. Hope to be back on it in 2-3 weeks.

As for the gooseneck.. yes I plan on leaving it in!!

Thanks for looking guys!

propanemudtruck · 09-30-2010, 12:13 PM

Quote:

Originally Posted by N2BOOST

As for the gooseneck.. yes I plan on leaving it in!!

CussinDusty · 09-30-2010, 01:25 PM

Awesome project. Can't wait to see more!

OZman · 10-25-2010, 05:05 AM

im not too far from you, just down 68 highway. do you happen to have the front hubcaps that were on the truck still? i might be interested if you want to get rid of them.

N2BOOST · 10-25-2010, 07:53 PM

My mom lives in Ottawa! I am planning on switchig whels and tires but I think the guy I bought the truck from wants any part back that I dont use since he has 3-4 more of these trucks. I will et you know if I can get rid of them.

Thanks

BTW the hood is almost finalized in primer. I'm hoping to get the chassis/cab sand blasted within 2 weeks.

1BadSS · 10-25-2010, 09:10 PM

You sold the Eclipse didn't you?

N2BOOST · 10-25-2010, 09:38 PM

Yes I did. I miss it, but I bought a 1995 fwd auto turbo talon that I'm planning on daily driving and running low 10's. There are more race classes for the front wheel drives and yet the mitsu/eagle is the only in the class with auto trans!

OZman · 10-26-2010, 03:19 AM

Quote:

Originally Posted by N2BOOST

My mom lives in Ottawa! I am planning on switchig whels and tires but I think the guy I bought the truck from wants any part back that I dont use since he has 3-4 more of these trucks. I will et you know if I can get rid of them.

Thanks

BTW the hood is almost finalized in primer. I'm hoping to get the chassis/cab sand blasted within 2 weeks.

alright, well it sounds like he has alot of trucks, so if you have and can get rid of or if he has and wants to get rid of a whole set of hubcabs 3/4 4x4, id appreciate it if you could find out, they go for ridiculous prices online.

N2BOOST · 11-03-2010, 01:24 AM

I definately will lyk if he wants to get rid of any caps.

UPDATE!

Got a edelbrock rpm intake, MSD billet HEI distributor, Holley 850 carb and a Holley elec fuel pump tonight for $350! They only have around 600 miles on them!!!

Also got the hood ready to wet sand and do a final expoy sealer coat. I'm scheduled to get the chassis/cab blasted this weekend or next depending on his sand shipment.

**Dieselwrencher** · 12-02-2010, 03:57 PM

Having any luck with this project?

N2BOOST · 12-02-2010, 05:29 PM

Still havent blasted the cab and chassis. I dont have a place to put it inside right now and it wont fit in my garage.

N2BOOST · 01-01-2011, 12:55 AM

Finally got a furnace in the shop and got the ball rolling again. I am suppose to paint the bed, fenders and hood in a few weeks and today I got the cab completely stripped and ready to be sand blasted hopefully this week pending weather. Not going as fast as I originally planned but rather take a step back and keep doing things the right way.

N2BOOST · 01-04-2011, 12:18 AM

Finished stripping the cab Sunday then dropped the truck off to have the cab and chassis sand blasted. Got a call today and it was done. They did areally good job and since the body sits high they were able to blast the underside of the cab really good.

N2BOOST · 01-04-2011, 12:22 AM

67swb72klb · 01-04-2011, 02:01 AM

sweet truck a friend in town had the exact same setup 20+ years ago realy got a lot of looks with it that was a long time ago

N2BOOST · 01-04-2011, 08:10 AM

Quote:

Originally Posted by 67swb72klb

sweet truck a friend in town had the exact same setup 20+ years ago realy got a lot of looks with it that was a long time ago

Thank you! Yeah the guy I bought it from put it together in 1978 and it's kind of a legend around my town.

N2BOOST · 01-07-2011, 02:26 PM

Got the epoxy primer on the cab to protect it from rusting while doing the bodywork and got the "Chassis Saver" epoxy coating on the chassis last night. Also, got a call and the upholstery shop already got the seat done so I took a road trip last night and picked it up. Heading to LMC tonight to get a few patch panels to weld inside the cab. I will try to post a few pics tonight.

1BadSS · 01-07-2011, 10:20 PM

You drove the Evo up to LMC didn't you?

N2BOOST · 01-07-2011, 11:59 PM

Yes I did!

1BadSS · 01-08-2011, 12:02 AM

I walked in shortly after you and picked up a bedside.

N2BOOST · 01-08-2011, 12:09 AM

Ah yeah I remember seeing you sit down next to me! Ha ha thats funny! Do you have a link to your project?

08-08-2010, 12:14 AM	#26
N2BOOST Registered User Join Date: Jul 2010 Location: Louisburg, KS Posts: 112	Re: PROJECT: 1950 Chevy 3/4T 4x4... new member Thank you very much Joe!!! I really did not plan on trying so hard to straighten everything, but when I got started on it I decided to give it the best I can and if it isn't perfect then at least I can say I tried. Thank you guys for the support!! P.S.... I already decided the next phase will be 4 linking the rear and maybe the front, then possibly put twin turbos on it. If I decide to do that I will place the turbos in the fenders basically behind the headlights then plumbing the exhaust back in toward the frame and firewall, BUT that's a long ways away! Last edited by N2BOOST; 08-14-2010 at 01:31 AM.

08-14-2010, 07:43 PM	#27
N2BOOST Registered User Join Date: Jul 2010 Location: Louisburg, KS Posts: 112	Re: PROJECT: 1950 Chevy 3/4T 4x4... new member Went shopping today at LMC! For once I have a project that I can get parts locally! Got all new weatherstripping and window seals for the entire truck, new windshields, new rear sliding window, glove box, splash panels between running boards and bed, S.S. locking gas cap and some other things. Bodywork is almost completed on everything except the hood, cab and chassis! __________________ Jason -1950 Chevy 3/4 4x4, 454... under construction -1992 Plymouth Laser 850hp front wheel drive -1992 Mitsubishi Eclipse AWD, 750hp 9.62@144mph, 3300 lbs on 18" street tires

09-29-2010, 02:16 AM	#28
vk_chevy Registered User Join Date: Jan 2004 Location: Olympia, WA Posts: 231	Re: PROJECT: 1950 Chevy 3/4T 4x4... new member looking forward to see more progress pics __________________ 72 Chevy C20 Longhorn 72 Chevy, K20 Custom Camper 67 Chevy, LWB, C20, 350/350, PS, PB, 65 Jag MKII

09-29-2010, 12:07 PM	#29
propanemudtruck Local Redneck Authority Join Date: Mar 2009 Location: Grand Rapids, MI Posts: 584	Re: PROJECT: 1950 Chevy 3/4T 4x4... new member Do you still plan on hauling a gooseneck with it when you're done? That would officially be the coolest hauler I've ever seen! __________________ -Kevin four on the floor feel the beat in your soul movin to the rhythym pumpin til ya cant take no more dance if you want to do what you came to you cant ignore the feeling of that four on the floor

09-29-2010, 09:24 PM	#30
N2BOOST Registered User Join Date: Jul 2010 Location: Louisburg, KS Posts: 112	Re: PROJECT: 1950 Chevy 3/4T 4x4... new member Sorry I have no updates. I lost my job and started a new one so I had to fix up a car to drive since my old job supplied me a vehicle. I am almost done with sanding the hood, then I'll get the chassis and cab blasted. Hope to be back on it in 2-3 weeks. As for the gooseneck.. yes I plan on leaving it in!! Thanks for looking guys! __________________ Jason -1950 Chevy 3/4 4x4, 454... under construction -1992 Plymouth Laser 850hp front wheel drive -1992 Mitsubishi Eclipse AWD, 750hp 9.62@144mph, 3300 lbs on 18" street tires

09-30-2010, 01:25 PM	#32
CussinDusty Registered User Join Date: Jun 2010 Location: Pascagoula,Mississippi Posts: 109	Re: PROJECT: 1950 Chevy 3/4T 4x4... new member Awesome project. Can't wait to see more! __________________ http://i957.photobucket.com/albums/a...sty/sig2-3.jpg 87' Blazer 36"TSL SX, Bedline'd Interior,and bumpers Heddman Long Tubes,True Dual Flowmaster 40's 4:11's locked Build Thread-http://www.fullsizechevy.com/showthr...r-Build-Thread

10-25-2010, 05:05 AM	#33
OZman Registered User Join Date: Aug 2010 Location: Ottawa, KS Posts: 9	Re: PROJECT: 1950 Chevy 3/4T 4x4... new member im not too far from you, just down 68 highway. do you happen to have the front hubcaps that were on the truck still? i might be interested if you want to get rid of them.

10-25-2010, 07:53 PM	#34
N2BOOST Registered User Join Date: Jul 2010 Location: Louisburg, KS Posts: 112	Re: PROJECT: 1950 Chevy 3/4T 4x4... new member My mom lives in Ottawa! I am planning on switchig whels and tires but I think the guy I bought the truck from wants any part back that I dont use since he has 3-4 more of these trucks. I will et you know if I can get rid of them. Thanks BTW the hood is almost finalized in primer. I'm hoping to get the chassis/cab sand blasted within 2 weeks. __________________ Jason -1950 Chevy 3/4 4x4, 454... under construction -1992 Plymouth Laser 850hp front wheel drive -1992 Mitsubishi Eclipse AWD, 750hp 9.62@144mph, 3300 lbs on 18" street tires

10-25-2010, 09:10 PM	#35
1BadSS NOT REALLY BANNED! Join Date: Jul 2004 Location: Shawnee, KS Posts: 1,072	Re: PROJECT: 1950 Chevy 3/4T 4x4... new member You sold the Eclipse didn't you? __________________ 1987 Mustang Coupe - 2.7 Stroker, 78mm turbo, Stainless header, 3" Exh, FMIC, 160lb/hr Injectors, MS3, twin walbro 255's, 34psi. Eating V8's daily. 04 Pontiac GTO 04 Ford Mustang GT 68 C20 LWB stripper truck 73 K5 Cheyenne 76 C20 Sierra Crew SRW 88 K20 Suburban I'm not hammering on metal just to hammer, i'm creating a piece of art.

10-25-2010, 09:38 PM	#36
N2BOOST Registered User Join Date: Jul 2010 Location: Louisburg, KS Posts: 112	Re: PROJECT: 1950 Chevy 3/4T 4x4... new member Yes I did. I miss it, but I bought a 1995 fwd auto turbo talon that I'm planning on daily driving and running low 10's. There are more race classes for the front wheel drives and yet the mitsu/eagle is the only in the class with auto trans! __________________ Jason -1950 Chevy 3/4 4x4, 454... under construction -1992 Plymouth Laser 850hp front wheel drive -1992 Mitsubishi Eclipse AWD, 750hp 9.62@144mph, 3300 lbs on 18" street tires

11-03-2010, 01:24 AM	#38
N2BOOST Registered User Join Date: Jul 2010 Location: Louisburg, KS Posts: 112	Re: PROJECT: 1950 Chevy 3/4T 4x4... new member I definately will lyk if he wants to get rid of any caps. UPDATE! Got a edelbrock rpm intake, MSD billet HEI distributor, Holley 850 carb and a Holley elec fuel pump tonight for $350! They only have around 600 miles on them!!! Also got the hood ready to wet sand and do a final expoy sealer coat. I'm scheduled to get the chassis/cab blasted this weekend or next depending on his sand shipment. __________________ Jason -1950 Chevy 3/4 4x4, 454... under construction -1992 Plymouth Laser 850hp front wheel drive -1992 Mitsubishi Eclipse AWD, 750hp 9.62@144mph, 3300 lbs on 18" street tires

12-02-2010, 03:57 PM	#39
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: PROJECT: 1950 Chevy 3/4T 4x4... new member Having any luck with this project? __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

12-02-2010, 05:29 PM	#40
N2BOOST Registered User Join Date: Jul 2010 Location: Louisburg, KS Posts: 112	Re: PROJECT: 1950 Chevy 3/4T 4x4... new member Still havent blasted the cab and chassis. I dont have a place to put it inside right now and it wont fit in my garage. __________________ Jason -1950 Chevy 3/4 4x4, 454... under construction -1992 Plymouth Laser 850hp front wheel drive -1992 Mitsubishi Eclipse AWD, 750hp 9.62@144mph, 3300 lbs on 18" street tires

01-01-2011, 12:55 AM	#41
N2BOOST Registered User Join Date: Jul 2010 Location: Louisburg, KS Posts: 112	Re: PROJECT: 1950 Chevy 3/4T 4x4... new member Finally got a furnace in the shop and got the ball rolling again. I am suppose to paint the bed, fenders and hood in a few weeks and today I got the cab completely stripped and ready to be sand blasted hopefully this week pending weather. Not going as fast as I originally planned but rather take a step back and keep doing things the right way. __________________ Jason -1950 Chevy 3/4 4x4, 454... under construction -1992 Plymouth Laser 850hp front wheel drive -1992 Mitsubishi Eclipse AWD, 750hp 9.62@144mph, 3300 lbs on 18" street tires

01-04-2011, 12:18 AM	#42
N2BOOST Registered User Join Date: Jul 2010 Location: Louisburg, KS Posts: 112	Re: PROJECT: 1950 Chevy 3/4T 4x4... new member Finished stripping the cab Sunday then dropped the truck off to have the cab and chassis sand blasted. Got a call today and it was done. They did areally good job and since the body sits high they were able to blast the underside of the cab really good. __________________ Jason -1950 Chevy 3/4 4x4, 454... under construction -1992 Plymouth Laser 850hp front wheel drive -1992 Mitsubishi Eclipse AWD, 750hp 9.62@144mph, 3300 lbs on 18" street tires



Register or Log In To remove these advertisements.

01-04-2011, 12:22 AM	#43
N2BOOST Registered User Join Date: Jul 2010 Location: Louisburg, KS Posts: 112	Re: PROJECT: 1950 Chevy 3/4T 4x4... new member __________________ Jason -1950 Chevy 3/4 4x4, 454... under construction -1992 Plymouth Laser 850hp front wheel drive -1992 Mitsubishi Eclipse AWD, 750hp 9.62@144mph, 3300 lbs on 18" street tires

01-04-2011, 02:01 AM	#44
67swb72klb Registered User Join Date: Dec 2010 Location: livingston co.mi Posts: 2,464	Re: PROJECT: 1950 Chevy 3/4T 4x4... new member sweet truck a friend in town had the exact same setup 20+ years ago realy got a lot of looks with it that was a long time ago __________________ California 65 GTO---Texas 64 burb 283 ---Oklahoma 67 CST SWB BBW wood bed 327 2004r---New Mexico 72 k10 350 350 auto---Georga 72 short step project

01-07-2011, 02:26 PM	#46
N2BOOST Registered User Join Date: Jul 2010 Location: Louisburg, KS Posts: 112	Re: PROJECT: 1950 Chevy 3/4T 4x4... new member Got the epoxy primer on the cab to protect it from rusting while doing the bodywork and got the "Chassis Saver" epoxy coating on the chassis last night. Also, got a call and the upholstery shop already got the seat done so I took a road trip last night and picked it up. Heading to LMC tonight to get a few patch panels to weld inside the cab. I will try to post a few pics tonight. __________________ Jason -1950 Chevy 3/4 4x4, 454... under construction -1992 Plymouth Laser 850hp front wheel drive -1992 Mitsubishi Eclipse AWD, 750hp 9.62@144mph, 3300 lbs on 18" street tires

01-07-2011, 10:20 PM	#47
1BadSS NOT REALLY BANNED! Join Date: Jul 2004 Location: Shawnee, KS Posts: 1,072	Re: PROJECT: 1950 Chevy 3/4T 4x4... new member You drove the Evo up to LMC didn't you? __________________ 1987 Mustang Coupe - 2.7 Stroker, 78mm turbo, Stainless header, 3" Exh, FMIC, 160lb/hr Injectors, MS3, twin walbro 255's, 34psi. Eating V8's daily. 04 Pontiac GTO 04 Ford Mustang GT 68 C20 LWB stripper truck 73 K5 Cheyenne 76 C20 Sierra Crew SRW 88 K20 Suburban I'm not hammering on metal just to hammer, i'm creating a piece of art.

01-07-2011, 11:59 PM	#48
N2BOOST Registered User Join Date: Jul 2010 Location: Louisburg, KS Posts: 112	Re: PROJECT: 1950 Chevy 3/4T 4x4... new member Yes I did! __________________ Jason -1950 Chevy 3/4 4x4, 454... under construction -1992 Plymouth Laser 850hp front wheel drive -1992 Mitsubishi Eclipse AWD, 750hp 9.62@144mph, 3300 lbs on 18" street tires

01-08-2011, 12:02 AM	#49
1BadSS NOT REALLY BANNED! Join Date: Jul 2004 Location: Shawnee, KS Posts: 1,072	Re: PROJECT: 1950 Chevy 3/4T 4x4... new member I walked in shortly after you and picked up a bedside. __________________ 1987 Mustang Coupe - 2.7 Stroker, 78mm turbo, Stainless header, 3" Exh, FMIC, 160lb/hr Injectors, MS3, twin walbro 255's, 34psi. Eating V8's daily. 04 Pontiac GTO 04 Ford Mustang GT 68 C20 LWB stripper truck 73 K5 Cheyenne 76 C20 Sierra Crew SRW 88 K20 Suburban I'm not hammering on metal just to hammer, i'm creating a piece of art.

01-08-2011, 12:09 AM	#50
N2BOOST Registered User Join Date: Jul 2010 Location: Louisburg, KS Posts: 112	Re: PROJECT: 1950 Chevy 3/4T 4x4... new member Ah yeah I remember seeing you sit down next to me! Ha ha thats funny! Do you have a link to your project? __________________ Jason -1950 Chevy 3/4 4x4, 454... under construction -1992 Plymouth Laser 850hp front wheel drive -1992 Mitsubishi Eclipse AWD, 750hp 9.62@144mph, 3300 lbs on 18" street tires

Register or Log In To remove these advertisements.