Trailing Arm ? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SCOTI · 01-31-2009, 03:00 PM

Quote:

Originally Posted by quickchevy

I am looking at running a 15 by 10 rim with a 3.5 backspacing.the tire will be mt drag radial 325 50 15.Will it fit under the stock wheel well.

It will be just about flush or extend just beyond the outer wheel well lip. So it will fit if you're not lowered. If lowered, more back-space will be required.

joe231 · 01-24-2009, 07:18 PM

even with the arms angled in the stock location you need a panhard or watts link...
also the factory arms have some "flex" designed into them, otherwise you would have little to no articulation, not that there is much anyway....

http://67-72chevytrucks.com/vboard/s...+trailing+arms

01-24-2009, 07:18 PM	#2
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Trailing Arm ? even with the arms angled in the stock location you need a panhard or watts link... also the factory arms have some "flex" designed into them, otherwise you would have little to no articulation, not that there is much anyway.... http://67-72chevytrucks.com/vboard/s...+trailing+arms __________________ *CHEVY ONLY* Last edited by joe231; 01-24-2009 at 07:27 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.