post latest 1/4 and 1/8 mile times and 60ft. - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RADDRACINTRK · 07-17-2008, 08:03 AM

djracer thanks for the welcome
69trk never thought truck would hook so hard with all stock hardware
still smiling

prostreet1967 · 07-19-2008, 12:10 AM

heres my best out of three runs haven't been back since i got slicks and track bar.will post new times soon. as for now i got the slowest truck lol

60' 2.218
330 5.884
mph 62.30
1/8 8.943
mph 77.54

this run was with 454 th400 ford 9 in 4.56 gears spool 33x21.5x15 sportsmans

Super73 · 02-02-2009, 02:51 AM

This should become a sticky IMO..

Post your newest info and I'll update the spreadsheet..

djracer · 02-02-2009, 08:33 AM

Maybe we can make it one oneday!

71Dragtruck · 02-02-2009, 10:12 AM

10.61@126.75 1.54 60'

383 Stroker · 02-02-2009, 01:05 PM

7.18@93mph, 1.56 60ft...

1FAST68 · 02-02-2009, 11:10 PM

I did more carb tuning.

11.98 at 109, had a 1.73 60ft and a good headwind so it improved.

bigjimzlll · 02-03-2009, 12:00 AM

ask and you shall recieve...it's sticky now

Super73 · 02-03-2009, 12:38 AM

Jim... Glad to see you around

franks72 · 03-07-2009, 01:17 AM

This was the end of last year. This year we get a new converter ,rear springs and spray it. Hope to get it in the 12s on the motor and 11s on the juice..

60' 1.872
330 5.432
1/8 8.405
mph 82.29
1000 11.006
1/4 13.225
mph 101.43
weight 4500

71chevytruckguy · 03-10-2009, 03:14 PM

Name 71chevytruckguy
Date 03/07/09
60' 1.811
330' 5.453
1/8 ET 8.478
1/8 MPH 82.736
1000' n/a
1/4 ET n/a
1/4 MPH n/a
Year 1969
Weight ???
Engine Platform (Cubic inches and SBC, BBC, BBF, LS-series, Hemi) 377 SBC
Transmission Muncie M-20
Stall converter dumping the clutch at 4000rpm
Power adder 1 none
Power adder 2
Power adder 3
Rear Gear 4.88
Rear Tire 28x10.5 M/T ET drag
Comments pump gas all motor

Chris.

Outlaw72 · 06-16-2009, 10:33 AM

Mine has a best of 7.36 @ 93mph in the 1/8th

That was a 1.61 60 ft.

LWB, Trailing arms, 10 inch wheel and MT Drag Radial

The new setup should be in the 6's...we will see soon

spaseghost · 08-09-2009, 07:30 PM

finally went out. i havent done anything to the truck except hook up the vacuum advance, tint the windows, and run premium. that open diff is killin me, i was thinking about going 305s in the rear or bigger. but i think a limited slip will really wake up the time and work great with the 275s. remember, im at 5000+ feet, so times are a little slower here. oh yeah, stock 8.5" 10 bolt with 2.73's. i was proud of me! ill get that lsd and see what happens, but i still really want some rallye wheels, money money money, damn it.

run #1
rt .655
60 2.638
1320 16.363 @ 81.44

run #2
rt .806
60 2.631
1320 17.614 @ 77.75
floor mat got stuck under gas pedal...

Run #3
rt .555
60 2.844
1320 16.503 @ 85.41

run #4
rt .403
60 2.717
1320 16.356 @ 84.81

limitedstreetoutlaw · 08-10-2009, 12:27 PM

Well i finally made it to my local track first time ever with the truck it has alittle more in it need to change gears crossing the line in second gear

all motor passes
1st pass
1.68 60'
7.66 1/8
83.85 mph lifted early

2nd pass
1.60 60'
7.45 1/8
88.70 mph adjusted timing

3rd pass
1.75 60'
7.65 1/8
89.57 mph spun out of the hole

_______________________________
1968 c-10 stepside "THE GRAPE APE"
all motor
1.56...60ft
7.41...1/8
89.41..1/8

spaseghost · 08-29-2009, 02:25 PM

two new ones from 8/28/09
rt .508
60 2.897
660 10.893 @ 69.29
1320 16.679 @84.48
still having traction issues

second run just had the track cleaned after a spill, i was first! i went against my dads 68 camaro

, first time he raced it he started in third! luckily it was a bye run, still embarassing. second time we went up together, im on the left lane.

0.223 rt .244
2.510 60 2.723
6.840 330 6.832
10.400 660 10.132
69.82 mph1 74.39
13.393 990 12.890
16.169 1320 15.409
84.29 mph2 92.74

1FAST68 · 08-29-2009, 11:18 PM

Learning how to take off and where to **** my new bullet.
11.13 at 117

KQQL IT · 08-30-2009, 03:20 PM

Super73? hows your 73 coming havnt seen any new pics over there. Any how .012 rt 1.671 60 ft 4.95 330ft 7.71 1/8th 88.71 mph 12.20 1/4 108.1 mph sbc 406 th 475 tci 3500 ish verter 3.82 gear 9 inch cal tracs hoosier 325/50 drag radial.

[IMG]http://i358.photobucket.com/albums/oo22/kool-...

Super73 · 09-05-2009, 04:35 PM

Nice pass.. Truck needs a little tuning but I did drive it to a car show a week or so ago.. I think the new intake is loading it up.. Weird how an intake change can make this thing go soooooo rich.

69trk · 09-07-2009, 12:30 AM

It seams i can just change a nut on the fender, and mine will run different

KQQL IT · 09-07-2009, 12:43 AM

super 73 good to hear the car moves. the pics on nc1320 were awesome

68 C-10 KID · 09-15-2009, 12:15 AM

Name68 C-10
Date9/11/09
60'1.664
330'
1/8 ET7.670
1/8 MPH88.94
1000'
1/4 ET12.223
1/4 MPH106.62
Year68
Weight4013lbs w/ 8 gal of Fuel
Engine Platform SBC406
TransmissionTH400
Stall converterHughes 4000 leaving @ 3600 RPM
Power adder 1na
Power adder 2na
Power adder 3na
Rear Gear4:10
Rear Tire28x13.5 ET drag MT
CommentsI'm not sure were some of my power went to. End of last year it ran 12.0 around 109mph. I have done leak down and comp test all is good. Next up Valve spring test.

djracer · 09-15-2009, 07:28 AM

Was the air the same?

Super73 · 09-15-2009, 11:27 AM

I was going to say DA effect's possibly.. It's amazing how much of an effect it can have..

joeys66pickup · 09-15-2009, 01:50 PM

wasent it like 90* that day? were you at Woodburn or PIR?

68 C-10 KID · 09-16-2009, 01:46 AM

I don't have any thing to test air levels to see if they are high or low.
I have only went 12.0's @ Woodburn and 12.1's at PIR.
I'm not on board w/ the abbreviation Of DA.
I did put a new ss blaster coil on last night. I need to OHM my old one. I'm borrowing my machinist spring tester this weekend so I can check springs on the heads in truck. I need to invest in log book real bad.

07-17-2008, 08:03 AM	#26
RADDRACINTRK Registered User Join Date: May 2008 Location: atlanta ga Posts: 2	Re: post latest 1/4 and 1/8 mile times and 60ft. djracer thanks for the welcome 69trk never thought truck would hook so hard with all stock hardware still smiling

07-19-2008, 12:10 AM	#27
prostreet1967 Registered User Join Date: Oct 2006 Location: fort worth texas Posts: 395	Re: post latest 1/4 and 1/8 mile times and 60ft. heres my best out of three runs haven't been back since i got slicks and track bar.will post new times soon. as for now i got the slowest truck lol 60' 2.218 330 5.884 mph 62.30 1/8 8.943 mph 77.54 this run was with 454 th400 ford 9 in 4.56 gears spool 33x21.5x15 sportsmans

02-02-2009, 02:51 AM	#28
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: post latest 1/4 and 1/8 mile times and 60ft. This should become a sticky IMO.. Post your newest info and I'll update the spreadsheet.. __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49

02-02-2009, 08:33 AM	#29
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: post latest 1/4 and 1/8 mile times and 60ft. Maybe we can make it one oneday! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-02-2009, 10:12 AM	#30
71Dragtruck Registered User Join Date: Jun 2004 Location: Saskatchewan, Canada Posts: 1,368	Re: post latest 1/4 and 1/8 mile times and 60ft. 10.61@126.75 1.54 60' __________________ Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs

02-02-2009, 01:05 PM	#31
383 Stroker Registered User Join Date: Aug 2001 Location: Jesup, GA Posts: 571	Re: post latest 1/4 and 1/8 mile times and 60ft. 7.18@93mph, 1.56 60ft... __________________ Video's of my Truck Racing 1967 C-10, 383ci Sbc, TH350, 3200 stall, 3.73 gear

02-02-2009, 11:10 PM	#32
1FAST68 Registered User Join Date: Apr 2008 Location: east, tx Posts: 149	Re: post latest 1/4 and 1/8 mile times and 60ft. I did more carb tuning. 11.98 at 109, had a 1.73 60ft and a good headwind so it improved.

02-03-2009, 12:00 AM	#33
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	Re: post latest 1/4 and 1/8 mile times and 60ft. ask and you shall recieve...it's sticky now __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA

02-03-2009, 12:38 AM	#34
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: post latest 1/4 and 1/8 mile times and 60ft. Jim... Glad to see you around __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49

03-07-2009, 01:17 AM	#35
franks72 Junior Member Join Date: Mar 2005 Location: Wilmington DE Posts: 218	Re: post latest 1/4 and 1/8 mile times and 60ft. This was the end of last year. This year we get a new converter ,rear springs and spray it. Hope to get it in the 12s on the motor and 11s on the juice.. 60' 1.872 330 5.432 1/8 8.405 mph 82.29 1000 11.006 1/4 13.225 mph 101.43 weight 4500 __________________ 72 cheyenne super BB402 TH400 Air Tack Tilt Posi P/S P/B AM/FM 12.96 @ 101.82 mph 60ft 1.82 12.39 @111.33 With a 180 shot nos 69 Camaro RS http://s94.photobucket.com/albums/l117/fdelcoglin/ email fdelcoglin@hotmail.com Last edited by franks72; 03-11-2009 at 07:48 PM.

03-10-2009, 03:14 PM	#36
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: post latest 1/4 and 1/8 mile times and 60ft. Name 71chevytruckguy Date 03/07/09 60' 1.811 330' 5.453 1/8 ET 8.478 1/8 MPH 82.736 1000' n/a 1/4 ET n/a 1/4 MPH n/a Year 1969 Weight ??? Engine Platform (Cubic inches and SBC, BBC, BBF, LS-series, Hemi) 377 SBC Transmission Muncie M-20 Stall converter dumping the clutch at 4000rpm Power adder 1 none Power adder 2 Power adder 3 Rear Gear 4.88 Rear Tire 28x10.5 M/T ET drag Comments pump gas all motor Chris. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

06-16-2009, 10:33 AM	#37
Outlaw72 Hay Team!! Join Date: Jun 2003 Location: Ft. Worth, TX, USA Posts: 366	Re: post latest 1/4 and 1/8 mile times and 60ft. Mine has a best of 7.36 @ 93mph in the 1/8th That was a 1.61 60 ft. LWB, Trailing arms, 10 inch wheel and MT Drag Radial The new setup should be in the 6's...we will see soon __________________ 1972 Chevrolet Cheyenne LWB "Orange and White" 8)

08-09-2009, 07:30 PM	#38
spaseghost certified tard Join Date: Jun 2009 Location: grand junction, colorado Posts: 182	Re: post latest 1/4 and 1/8 mile times and 60ft. finally went out. i havent done anything to the truck except hook up the vacuum advance, tint the windows, and run premium. that open diff is killin me, i was thinking about going 305s in the rear or bigger. but i think a limited slip will really wake up the time and work great with the 275s. remember, im at 5000+ feet, so times are a little slower here. oh yeah, stock 8.5" 10 bolt with 2.73's. i was proud of me! ill get that lsd and see what happens, but i still really want some rallye wheels, money money money, damn it. run #1 rt .655 60 2.638 1320 16.363 @ 81.44 run #2 rt .806 60 2.631 1320 17.614 @ 77.75 floor mat got stuck under gas pedal... Run #3 rt .555 60 2.844 1320 16.503 @ 85.41 run #4 rt .403 60 2.717 1320 16.356 @ 84.81 Last edited by spaseghost; 08-09-2009 at 07:33 PM.

08-10-2009, 12:27 PM	#39
limitedstreetoutlaw Registered User Join Date: Jun 2009 Location: Arkoma OK Posts: 134	Re: post latest 1/4 and 1/8 mile times and 60ft. Well i finally made it to my local track first time ever with the truck it has alittle more in it need to change gears crossing the line in second gear all motor passes 1st pass 1.68 60' 7.66 1/8 83.85 mph lifted early 2nd pass 1.60 60' 7.45 1/8 88.70 mph adjusted timing 3rd pass 1.75 60' 7.65 1/8 89.57 mph spun out of the hole _______________________________ 1968 c-10 stepside "THE GRAPE APE" all motor 1.56...60ft 7.41...1/8 89.41..1/8 Last edited by limitedstreetoutlaw; 11-18-2009 at 03:30 PM.

08-29-2009, 02:25 PM	#40
spaseghost certified tard Join Date: Jun 2009 Location: grand junction, colorado Posts: 182	Re: post latest 1/4 and 1/8 mile times and 60ft. two new ones from 8/28/09 rt .508 60 2.897 660 10.893 @ 69.29 1320 16.679 @84.48 still having traction issues second run just had the track cleaned after a spill, i was first! i went against my dads 68 camaro, first time he raced it he started in third! luckily it was a bye run, still embarassing. second time we went up together, im on the left lane. 0.223 rt .244 2.510 60 2.723 6.840 330 6.832 10.400 660 10.132 69.82 mph1 74.39 13.393 990 12.890 16.169 1320 15.409 84.29 mph2 92.74 __________________ 85 swb bbc 5% tint 16.356 @ 84.81 8/07/09 4800 Ft., bad timing, carb tune, and traction, fugg it. 16.169 @ 84.29 8/28/09 good timing, no carb tune, some traction... 06 Equinox LT AWD, wife's and family ride 03 Mustang V6, CAI, Duals, Pullies, Programmer, Short Throw, wife's dream car?! 90 Eagle Talon, other project / space taker, GOT head!! 08 Silverado 2500 HD, the bad ass work truck



Register or Log In To remove these advertisements.

08-29-2009, 11:18 PM	#41
1FAST68 Registered User Join Date: Apr 2008 Location: east, tx Posts: 149	Re: post latest 1/4 and 1/8 mile times and 60ft. Learning how to take off and where to **** my new bullet. 11.13 at 117

09-05-2009, 04:35 PM	#43
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: post latest 1/4 and 1/8 mile times and 60ft. Nice pass.. Truck needs a little tuning but I did drive it to a car show a week or so ago.. I think the new intake is loading it up.. Weird how an intake change can make this thing go soooooo rich. __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49

09-07-2009, 12:30 AM	#44
69trk Registered User Join Date: Oct 2006 Location: bridgecreek ok. Posts: 1,214	Re: post latest 1/4 and 1/8 mile times and 60ft. It seams i can just change a nut on the fender, and mine will run different __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=494388 431 big block times, changed to a 6.0 ls with turbo 1.58- 60' 7.18- 1/8th mile@95.18 11.37- 1/4 @115.81

09-07-2009, 12:43 AM	#45
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,237	Re: post latest 1/4 and 1/8 mile times and 60ft. super 73 good to hear the car moves. the pics on nc1320 were awesome Last edited by KQQL IT; 09-07-2009 at 12:44 AM.

09-15-2009, 12:15 AM	#46
68 C-10 KID Mean Green Join Date: Sep 2007 Location: Portland, OR Posts: 522	Re: post latest 1/4 and 1/8 mile times and 60ft. Name68 C-10 Date9/11/09 60'1.664 330' 1/8 ET7.670 1/8 MPH88.94 1000' 1/4 ET12.223 1/4 MPH106.62 Year68 Weight4013lbs w/ 8 gal of Fuel Engine Platform SBC406 TransmissionTH400 Stall converterHughes 4000 leaving @ 3600 RPM Power adder 1na Power adder 2na Power adder 3na Rear Gear4:10 Rear Tire28x13.5 ET drag MT CommentsI'm not sure were some of my power went to. End of last year it ran 12.0 around 109mph. I have done leak down and comp test all is good. Next up Valve spring test.

09-15-2009, 07:28 AM	#47
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: post latest 1/4 and 1/8 mile times and 60ft. Was the air the same? __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-15-2009, 11:27 AM	#48
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: post latest 1/4 and 1/8 mile times and 60ft. I was going to say DA effect's possibly.. It's amazing how much of an effect it can have.. __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49

09-15-2009, 01:50 PM	#49
joeys66pickup Dr. Frankenstein Join Date: Feb 2008 Location: beaverton,Or Posts: 458	Re: post latest 1/4 and 1/8 mile times and 60ft. wasent it like 90* that day? were you at Woodburn or PIR? __________________ I Wanna Go Fast!!

09-16-2009, 01:46 AM	#50
68 C-10 KID Mean Green Join Date: Sep 2007 Location: Portland, OR Posts: 522	Re: post latest 1/4 and 1/8 mile times and 60ft. I don't have any thing to test air levels to see if they are high or low. I have only went 12.0's @ Woodburn and 12.1's at PIR. I'm not on board w/ the abbreviation Of DA. I did put a new ss blaster coil on last night. I need to OHM my old one. I'm borrowing my machinist spring tester this weekend so I can check springs on the heads in truck. I need to invest in log book real bad.

Register or Log In To remove these advertisements.