CA 1972 GMC Suburban part out - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cucvzuz · 07-26-2015, 03:24 PM

Quote:

Originally Posted by budnikguy

I have a couple burbs i can remove it from...post pics and measurements for the cut you would need. I am not going to cut this green one up at this point.

I need from the marker light around to the tailgate edge and from the body line down to the bottom

budnikguy · 07-28-2015, 11:27 AM

That is a large cut...and shipping will be costly..I could make the cut as you described for $150. Shipping through Fastenal may be a viable option. lmk

Quote:

Originally Posted by cucvzuz

I need from the marker light around to the tailgate edge and from the body line down to the bottom

magntik · 07-26-2015, 05:21 PM

Quote:

Originally Posted by budnikguy

I have a couple burbs i can remove it from...post pics and measurements for the cut you would need. I am not going to cut this green one up at this point.

Have any with a complete luggage rack?

I may still be interested in the rear emblem if all the pieces are there.

budnikguy · 07-26-2015, 10:41 PM

Sorry no luggage rack, I will get pics of the emblem tomorrow for you.....

Quote:

Originally Posted by magntik

Have any with a complete luggage rack?

I may still be interested in the rear emblem if all the pieces are there.

budnikguy · 08-05-2015, 08:50 PM

Here are pics of the emblem removed!

Quote:

Originally Posted by magntik

Have any with a complete luggage rack?

I may still be interested in the rear emblem if all the pieces are there.

cucvzuz · 08-02-2015, 08:44 PM

Quote:

Originally Posted by budnikguy

I have a couple burbs i can remove it from...post pics and measurements for the cut you would need. I am not going to cut this green one up at this point.

Here is what I'm looking for. im also interesred in the hood hinges.
Shipped to 48114

budnikguy · 08-05-2015, 09:36 PM

Here are pics of the 2 suburbans that I would be willing to cut your desired section out of. This green one is too clean to cut up like that...lmk if either one of these would do...

Quote:

Originally Posted by cucvzuz

Here is what I'm looking for. im also interesred in the hood hinges.
Shipped to 48114

cucvzuz · 08-06-2015, 10:42 PM

How much for the brown one shipped to 48114 commercial address.

Quote:

Originally Posted by budnikguy

Here are pics of the 2 suburbans that I would be willing to cut your desired section out of. This green one is too clean to cut up like that...lmk if either one of these would do...

**richard2717** · 07-26-2015, 11:43 AM

And I will get in line for the complete pair of front doors as well

Thanks
Richard

budnikguy · 07-26-2015, 02:35 PM

Door pics posted, you would be next in line...

Quote:

Originally Posted by richard2717

And I will get in line for the complete pair of front doors as well

Thanks
Richard

**richard2717** · 07-26-2015, 03:55 PM

Quote:

Originally Posted by budnikguy

I have removed and sold quarters before....and it is a lot of work to remove them...I may be open to that option down the road but not looking to do that at this point of the part out...ty btw, I used Fastenal also, and they are great for shipping over sized heavy parts!

Quote:

Originally Posted by budnikguy

Door pics posted, you would be next in line...

I sent you a text as well. Not sure if you got it or not.
Just let me know if they get to me what the costs would be. shipping zip is 21801.

Thanks

mkretzler · 09-10-2016, 04:22 PM

I,m working on a 72 K5 Blazer if you happen to have a passenger side motor mount bracket. Someone notched it out for header clearance. I also need the very front of the rocker panels where the fenders would bolt up it's rusted really bad both passenger and drivers side. Thanks Don 561-202-4572

**Cam1968rsss** · 10-22-2016, 11:48 AM

Hi, do you still have the hood hinges?

pwdcougar · 10-22-2016, 11:58 AM

Adam I'm still looking for this inner rocker piece.

Paul

Theboatandcarman · 11-07-2016, 11:19 AM

looking for a ho52 4.10 no-spin center section. pretty common in suburbans i think? let me know!

cucvzuz · 07-26-2015, 03:25 PM

How much for the hood hinges and 3rd door.

budnikguy · 07-28-2015, 11:30 AM

Hood hinges, $40 plus the ride. Third door $150 plus the ride.

]

Quote:

Originally Posted by cucvzuz

How much for the hood hinges and 3rd door.

rayray767 · 07-26-2015, 03:55 PM

Gas cap sold yet ... How much?

budnikguy · 07-28-2015, 11:31 AM

Gas cap sold...I may have another...give me a couple days to check please

Quote:

Originally Posted by rayray767

Gas cap sold yet ... How much?

**1968k20** · 07-26-2015, 04:10 PM

I will take the complete back-up assemblies including lenses please. Pm me pp info and shipping to 96020, and will pay today. Thank you.

budnikguy · 07-26-2015, 10:40 PM

PM sent...

Quote:

Originally Posted by 1968k20

I will take the complete back-up assemblies including lenses please. Pm me pp info and shipping to 96020, and will pay today. Thank you.

Jake1971 · 07-26-2015, 08:17 PM

I will take your best pair of gas tank straps with associated hardware pending pictures. Total to 78602?

budnikguy · 07-26-2015, 10:46 PM

I will get you pics tomorrow....

Quote:

Originally Posted by Jake1971

I will take your best pair of gas tank straps with associated hardware pending pictures. Total to 78602?

budnikguy · 07-28-2015, 11:33 AM

Gas tank straps and hardware....

Quote:

Originally Posted by Jake1971

I will take your best pair of gas tank straps with associated hardware pending pictures. Total to 78602?

**DeadheadNM** · 07-26-2015, 08:46 PM

Thank you for the pics - I'll take the gas cap and rear bumper plate light assembly pending total cost to 87110. Pete

07-26-2015, 11:43 AM	#9
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,091	Re: 1972 GMC Suburban part out And I will get in line for the complete pair of front doors as well Thanks Richard __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

09-10-2016, 04:22 PM	#12
mkretzler Registered User Join Date: Aug 2016 Location: Stuart/FLA Posts: 2	Re: 1972 GMC Suburban part out I,m working on a 72 K5 Blazer if you happen to have a passenger side motor mount bracket. Someone notched it out for header clearance. I also need the very front of the rocker panels where the fenders would bolt up it's rusted really bad both passenger and drivers side. Thanks Don 561-202-4572

10-22-2016, 11:48 AM	#13
Cam1968rsss Senior Member Join Date: Oct 2010 Location: Zavalla, TX Posts: 417	Re: 1972 GMC Suburban part out Hi, do you still have the hood hinges?

10-22-2016, 11:58 AM	#14
pwdcougar Registered User Join Date: Oct 2013 Location: New Jersey Posts: 1,307	Re: 1972 GMC Suburban part out Adam I'm still looking for this inner rocker piece. Paul Attached Images __________________ "You know that little thing in your head that keeps you from saying things you shouldn't? Yeah well, I don't have one of those" 1969 Mercury Cougar Standard 4 speed 1969 Mercury Cougar XR7 convertible 1970 4WD Chevrolet Suburban 1997 4WD Chevrolet Silverado Extended Cab Short Bed (purchased new January 1997)

11-07-2016, 11:19 AM	#15
Theboatandcarman Registered User Join Date: Aug 2015 Location: Harleysville, PA Posts: 398	Re: 1972 GMC Suburban part out looking for a ho52 4.10 no-spin center section. pretty common in suburbans i think? let me know!

07-26-2015, 03:25 PM	#16
cucvzuz Registered User Join Date: Jul 2010 Location: howell mi Posts: 248	Re: 1972 GMC Suburban part out How much for the hood hinges and 3rd door.

07-26-2015, 03:55 PM	#18
rayray767 Registered User Join Date: Apr 2012 Location: Columbus Ohio Posts: 1,135	Re: 1972 GMC Suburban part out Gas cap sold yet ... How much?

07-26-2015, 04:10 PM	#20
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,629	Re: 1972 GMC Suburban part out I will take the complete back-up assemblies including lenses please. Pm me pp info and shipping to 96020, and will pay today. Thank you.

07-26-2015, 08:17 PM	#22
Jake1971 Registered User Join Date: Oct 2013 Location: Bonnerdale, AR Posts: 699	Re: 1972 GMC Suburban part out I will take your best pair of gas tank straps with associated hardware pending pictures. Total to 78602? __________________ 1971 Bone Stock C10 project "Jake" 1997 Sierra SLT factory short bed "Silver Bullet"

07-26-2015, 08:46 PM	#25
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,422	Re: 1972 GMC Suburban part out Thank you for the pics - I'll take the gas cap and rear bumper plate light assembly pending total cost to 87110. Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.