TX parting out 72 longhorn cab and pieces

[6t727t2]

looking for a very clean patch panel for this area above heater box, thanks

[tlcrz1972]

I will call it very good, I can get that to you plus some extra $25.00 mailed to you.

Originally Posted by 6t727t2

looking for a very clean patch panel for this area above heater box, thanks

[tlcrz1972]

Ok I have the patch panel cut out, here are a couple of pictures of it.

I did cut it oversized, just to give you plenty to work with.

I hope your still interested.

Let me know and I'll get you my info and vise versa.


QUOTE=6t727t2;6154167]looking for a very clean patch panel for this area above heater box, thanks[/QUOTE]

[tlcrz1972]

Here are some more pictures of the truck and what I figure someone will be interested in.

pic 1: transmission mount ($35.00+s) and dual exhaust hanger brackets ($18.00+s)
pic 2 & 3: dual exhaust hanger brackets
pic 4: brake pedal assy ($40.00+s)
pic 5: e-brake pedal assy ($25.00+s)

[tlcrz1972]

more pictures of useable parts:

pic 1: all sorts of frontend parts
pic 2 & 3 longhorn LH bedside, condition fair - maybe better than yours. IDK
pic 4 & 5: longhorn RH bedside, condition fair - maybe better than yours. IDK

If interested ask and I'll price it for you.

[tlcrz1972]

E-brake pad and bezel in relatively good shape $15.00 mailed to you


brake pad and bezel no good. if you want them free.

dash pad. dead

Originally Posted by gdavis

how about the e brake foot pad and brake foot pad with benzels also. shiped to 34446
and how is the dash pad

[Hard_Rain420]

OK, I'll take your word on that. Thanks for checking it out.

[cjohnson6772]

OK. I'll pass. I was hoping for a 12 bolt 3.73.
Posted via Mobile Device

[brian1971]

I'm in need of dash section for radio,someone cut my holes out that go around radio knobs.Thanks Brian

[tlcrz1972]

Sorry I missed your post till now, sorry I don't have any dashes that I am willing to cut out the radio knob areas for you. I did 6 months ago when I went on a recycling frenzie.

I'll keep my eye out for some.

Originally Posted by brian1971

I'm in need of dash section for radio,someone cut my holes out that go around radio knobs.Thanks Brian

[tlcrz1972]

Sorry I missed your post till now, sorry I don't have any dashes that I am willing to cut out the radio knob areas for you. I did 6 months ago when I went on a recycling frenzie.

I'll keep my eye out for some.

Originally Posted by brian1971

I'm in need of dash section for radio,someone cut my holes out that go around radio knobs.Thanks Brian

[tlcrz1972]

oops,
Here are some pictures.

[In The Ten Ring]

Do you still have the driver's side front inner fender?

Yours looks pretty rust free.....would yours fit a 1972 Chevy 1/2 ton?

Would it also work with power steering?

I'm rather new at this sort of thing but my inner front fenders are pretty rusty!

My zipcode is 25832.

[tlcrz1972]

Yes I still have the LH inner fender, it is in good shape, but I'll check it out tomorrow throughly and verify the condition.

Yes it should fit a 1/2 ton and it is a power steering truck so there should be no problems there, plus I believe there is not any difference between power steering and non-ps inner fenders.

I'll have to see who can handle such a bulky item and how much shipping would be. I'm not set up to ship so I don't know all the size requirements.

Thanks for inquiring Brian

Originally Posted by In The Ten Ring

Do you still have the driver's side front inner fender?

Yours looks pretty rust free.....would yours fit a 1972 Chevy 1/2 ton?

Would it also work with power steering?

I'm rather new at this sort of thing but my inner front fenders are pretty rusty!

My zipcode is 25832.

[In The Ten Ring]

Could you PM me about the inner fender? I'm new to this site and might miss your reply.

[birdistheword]

Do you have any side toolbox doors?

[tlcrz1972]

No I don't, sorry.

Originally Posted by birdistheword

Do you have any side toolbox doors?

[In The Ten Ring]

Hey man, one more thing.

Since you were able to cut out the passenger side of the firewall there for that one fellow....could you cut out the same for me, but the other side?

I'll try and get pics tomorrow of what I have in mind and get an online account to post those from. I have some rust there and when/if I get around to a frameoff, it would be great to already have that part.

THANKS!

[tlcrz1972]

I sure can, get me a picture so I know exactly what you need. And I'm sure I'll cut it large just to give you plenty to work with.

Originally Posted by In The Ten Ring

Hey man, one more thing.

Since you were able to cut out the passenger side of the firewall there for that one fellow....could you cut out the same for me, but the other side?

I'll try and get pics tomorrow of what I have in mind and get an online account to post those from. I have some rust there and when/if I get around to a frameoff, it would be great to already have that part.

THANKS!

[In The Ten Ring]

Great man, thanks.

I was too busy today to take a pic of my firewall rust area but I'll try again tomorrow.

Shipping on an inner fender would be difficult for sure; getting it to me without being bent up would be tough. If you are willing to go through with it, I'm sure we can figure out some way to do it as I don't think I'll be able to pick anything up in person!

[boynton]

Side markers to 76571 also do you have the fronts?
Posted via Mobile Device

[tlcrz1972]

I have one front (amber) and one rear (red)

condition is good, but they need some tlc to make them look correct.

I could send them to you for $20.00

Originally Posted by boynton

Side markers to 76571 also do you have the fronts?
Posted via Mobile Device

[Hard_Rain420]

If 6t727t2 passed on the patch panel above the heater box I'd be interested in it. How much shipped? I'll need to check the location of my bad area. My truck is a 69. Is the 72 patch panel the similar to the 69?

Thanks,

Rich

[tlcrz1972]

Rich,

To the best of my knowledge they should be the same.

I'll give him a few more days to respond.

l8tr

Originally Posted by Hard_Rain420

If 6t727t2 passed on the patch panel above the heater box I'd be interested in it. How much shipped? I'll need to check the location of my bad area. My truck is a 69. Is the 72 patch panel the similar to the 69?

Thanks,

Rich

[Hard_Rain420]

Oh yeah! shipped to 32906