![]() |
|
![]() |
#1 |
Senior Member
![]() Join Date: Aug 2006
Location: Atascadero, CA
Posts: 1,152
|
Re: Finally my own build thread!
Thanks everyone for the encouraging words. By then end of today i should have the 4 link installed. I had to make a special braket for the angled support pieces because the ones that come with the kit didn't fit. I also had to modify the lower brackets. I love my plasma because i would be hating life.
![]() N2TRUX - I bought all my stuff from Nathan Porterbuilt and originally i was going to go with a parallel 4 link but after talking to him he highly recommended me to go with the trianglated 4 link instead. He was saying that there is alot less movement with a trianglated vrs a parallel. Kenneth - I bought the trianglated 4 link from Air Ride Technologies.
__________________
(Project truck) 1970 C10 under complete transformation ![]() My current build thread http://67-72chevytrucks.com/vboard/s...d.php?t=212871 Other project: C5 corvette swap into 70 c10 http://67-72chevytrucks.com/vboard/s...=1#post2413517 On Hold |
![]() |
![]() |
![]() |
#2 |
Junior Member
Join Date: Jun 2006
Location: Frisco Tx
Posts: 311
|
Re: Finally my own build thread!
Frame is looking good. Did you make your own body mount brackets? I'm doing a very similar frame, but my backhalf will be different.
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jul 2006
Location: utah
Posts: 182
|
Re: Finally my own build thread!
how much for a exact frame like yours with only body mounts.
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Dec 2003
Location: Mesa,Az
Posts: 3,981
|
Re: Finally my own build thread!
Josh-
Here's the pic you needed.
__________________
www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003! |
![]() |
![]() |
![]() |
#5 |
Senior Member
![]() Join Date: Aug 2006
Location: Atascadero, CA
Posts: 1,152
|
Re: Finally my own build thread!
Thanks Nathan! That pic helps out ALOT!!!! I am going to start installing it tonight!
Well i finally got the rear suspension done. I still have to do some more welding but it is ALIVE!!! ![]() Josh
__________________
(Project truck) 1970 C10 under complete transformation ![]() My current build thread http://67-72chevytrucks.com/vboard/s...d.php?t=212871 Other project: C5 corvette swap into 70 c10 http://67-72chevytrucks.com/vboard/s...=1#post2413517 On Hold |
![]() |
![]() |
![]() |
#6 |
Senior Member
![]() Join Date: Aug 2006
Location: Atascadero, CA
Posts: 1,152
|
Re: Finally my own build thread!
Here is a couple more of it fully lifted up.
__________________
(Project truck) 1970 C10 under complete transformation ![]() My current build thread http://67-72chevytrucks.com/vboard/s...d.php?t=212871 Other project: C5 corvette swap into 70 c10 http://67-72chevytrucks.com/vboard/s...=1#post2413517 On Hold |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Jan 2007
Location: Lackawanna, New York
Posts: 30
|
Re: Finally my own build thread!
Looks Awesome! Keep up the good work......Must be nice to work outside all year around LOL. I pushed my 69 C-10 project truck outside for 1 day! (Friday the 13th of October 2006)......we made national news that day "Freak Snow Storm" shuts down City leaves tens-of -thousands without power and snow measured in feet not inches.........my long winded point is; Take full advantage of your long work seasons (for all of us) who are working next to heaters during the cold seasons!
__________________
1969 chevy C-20 (soon to be shortened & Tubbed C-10) 1990 Astro AWD 3" Lift w/Laredo tires 10 spkr. 800w system and DVD player for the long trips (got it for free) ![]() ![]() |
![]() |
![]() |
![]() |
#8 |
To The Levy
Join Date: Jan 2007
Location: california
Posts: 391
|
Re: Finally my own build thread!
drooling on my lap top .... darn thats gonna be sweet, keep the photo's pouring in through---out...
![]() |
![]() |
![]() |
![]() |
#9 |
Senior Member
![]() Join Date: Aug 2006
Location: Atascadero, CA
Posts: 1,152
|
Re: Finally my own build thread!
Yeah i made the body brackets. Are you doing a step notch back half?
__________________
(Project truck) 1970 C10 under complete transformation ![]() My current build thread http://67-72chevytrucks.com/vboard/s...d.php?t=212871 Other project: C5 corvette swap into 70 c10 http://67-72chevytrucks.com/vboard/s...=1#post2413517 On Hold |
![]() |
![]() |
![]() |
#10 |
Junior Member
Join Date: Jun 2006
Location: Frisco Tx
Posts: 311
|
Re: Finally my own build thread!
Yea, a stepnotch. I want to try and keep as much bed depth as I can. The brackets look real nice...
Last edited by 68laydout; 10-13-2006 at 12:47 PM. |
![]() |
![]() |
![]() |
#11 |
Yup, I'm comp-useless
Join Date: May 2005
Location: Edmonton,Alta,Canada
Posts: 360
|
Re: Finally my own build thread!
That's lookin' like a really good start, to another 'hafta follow build'.
Did you and Nathan talk about doing a parallel 4 link with a Watts link? If so, any pros/cons come up about that set-up? |
![]() |
![]() |
![]() |
#12 |
Senior Member
![]() Join Date: Aug 2006
Location: Atascadero, CA
Posts: 1,152
|
Re: Finally my own build thread!
Well i finally got to take some pics of the rear end. It is just tacked together but for the most part i think i am close to being done. I wanted to do something creative but yet still be able to be functionable. I mounted the shockwaves at a 21deg angle. I also had to make a custom bracket for the angled 4 link bars because i wasn't getting enough of an angle to mount them on the inside of the frame. There is practically no movement in a side to side movement. I think after it is all welded up there wont be any at all.
![]() ![]() ![]()
__________________
(Project truck) 1970 C10 under complete transformation ![]() My current build thread http://67-72chevytrucks.com/vboard/s...d.php?t=212871 Other project: C5 corvette swap into 70 c10 http://67-72chevytrucks.com/vboard/s...=1#post2413517 On Hold |
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Nov 2004
Location: Texas
Posts: 199
|
Re: Finally my own build thread!
gonna c-notch it too???
__________________
Daily Driver:
383 sbc Shaved. lowerd |
![]() |
![]() |
![]() |
#14 |
WTB this ad
Join Date: Sep 2004
Location: Lafayette Georgia
Posts: 5,074
|
Re: Finally my own build thread!
|
![]() |
![]() |
![]() |
#15 |
Life, Be In It.....
![]() Join Date: Oct 2003
Location: Novato, California
Posts: 1,498
|
Re: Finally my own build thread!
I will certainately be keeping my eye on this one. I wish I had your talent. Great work.
__________________
Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows" http://67-72chevytrucks.com/vboard/s...d.php?t=200082 |
![]() |
![]() |
![]() |
#16 |
Senior Member
Join Date: Jun 2006
Location: Oregon City, Or
Posts: 758
|
Re: Finally my own build thread!
Nice work. Keep us posted on the progress.
|
![]() |
![]() |
![]() |
#17 |
Senior Member
![]() Join Date: Aug 2006
Location: Atascadero, CA
Posts: 1,152
|
Re: Finally my own build thread!
Thanks everyone! Yeah i am not going to notch it. I have been talking to Nathan Porterbuilt and he mentioned that with the airbags so far inward towards the pumpkin ( i think that what you call it) that it might feel a little sloppy. So after about a few days worth of work i will probably scrap it and move them outwards and hopefully mount them on the outside of the frame. It sucks because all the work i did using the plasma machine, grinding, dry fitting, then more grinding, drilling, and so on. I want to do it right so i don't have to fix anything else down the road. The way i keep mounting everything there won't be anything inside the frame
![]()
__________________
(Project truck) 1970 C10 under complete transformation ![]() My current build thread http://67-72chevytrucks.com/vboard/s...d.php?t=212871 Other project: C5 corvette swap into 70 c10 http://67-72chevytrucks.com/vboard/s...=1#post2413517 On Hold |
![]() |
![]() |
![]() |
#18 | |
Registered User
Join Date: Mar 2005
Location: Modesto, Ca
Posts: 225
|
Re: Finally my own build thread!
Quote:
Jr
__________________
Please become a site supporting vendor to advertise a business in your signature. you can do so here |
|
![]() |
![]() |
![]() |
#19 |
Account Suspended
Join Date: Nov 2004
Location: Deer Park, Tx.
Posts: 2,524
|
Re: Finally my own build thread!
Looking good dude. Nice setup
|
![]() |
![]() |
![]() |
#20 |
Freeeeee Mason...
Join Date: Sep 2006
Location: McAlester, Oklahoma
Posts: 320
|
Re: Finally my own build thread!
I'm sure he isnt going to c-notch it... He probably would have done that when building the frame to make it easier.
|
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: Jan 2006
Location: ohio
Posts: 9
|
Re: Finally my own build thread!
looks sweet so far!
|
![]() |
![]() |
![]() |
#22 |
Sb 400 club
Join Date: Nov 2005
Location: NH / MA
Posts: 2,745
|
Re: Finally my own build thread!
looking awspome man . you should hold on to that frame for some one as those are always nice to have. Great work and that new frame looks sweet
__________________
![]() ![]() 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed ![]() 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out |
![]() |
![]() |
![]() |
#23 |
Senior Member
![]() Join Date: Aug 2006
Location: Atascadero, CA
Posts: 1,152
|
Re: Finally my own build thread!
Yeah I was going to keep the stock short frame because after i finish this truck i was going to find a long bed and swap the cab and fenders to the short frame and just purchase a new/used bed and make a rat rod truck! I should have the rear end done this weekend and i will take some pics.
josh
__________________
(Project truck) 1970 C10 under complete transformation ![]() My current build thread http://67-72chevytrucks.com/vboard/s...d.php?t=212871 Other project: C5 corvette swap into 70 c10 http://67-72chevytrucks.com/vboard/s...=1#post2413517 On Hold |
![]() |
![]() |
![]() |
#24 |
Registered User
Join Date: Oct 2006
Location: Porterville, CA
Posts: 146
|
Re: Finally my own build thread!
very VERY nice job on the frame and suspension so far. im going to making my long bed into a short bed, i hope my project goes as smooth as yours is. if you do a frame mod or in your case a whole new frame would you need to have a CHP to look it over to make sure that its safe before you get the registration? thats my only concern. how much movement do thoes bags have? about 5 or 6"?
|
![]() |
![]() |
![]() |
#25 | |
Senior Member
![]() Join Date: Aug 2006
Location: Atascadero, CA
Posts: 1,152
|
Re: Finally my own build thread!
Quote:
![]() Hey Valleycustom i sent you a pm! One more thing. I sent on of my wheels to the powdercoater and he was hoping to have the one wheel done by tomorrow! I am praying that it is going to be done. I can't wait to see it. Josh
__________________
(Project truck) 1970 C10 under complete transformation ![]() My current build thread http://67-72chevytrucks.com/vboard/s...d.php?t=212871 Other project: C5 corvette swap into 70 c10 http://67-72chevytrucks.com/vboard/s...=1#post2413517 On Hold Last edited by abadsvt; 11-09-2006 at 09:23 PM. |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|