Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1Bad62Pro/Street · 07-06-2012, 04:11 PM

Teehee...

Marv D · 02-27-2010, 05:07 PM

68c10,,

yup

1bad62
Not really any good ones. This one from when it was a bottle baby, but it's not a great picture

I made them. There nothing but .065 aluminum I bought at a scrap place, Kept dinking with a template till I had it close, then went to a buddy's shop and borrowed his manual brake. Took them out back and sanded them in one direction with 600 grit sandpaper, then lightly with 1000, and shot them with clear. Over the years the poor ol truck has seen so many changes and reconfigurations that there pretty full of holes for mounting ignitions, fuel regulators and what not. I'll get some pictures when I pull the motor it will be a little clearer. But have to trim and fit the motor plate before I pull it, loose the side mounts, etc. Going to have to build my own headers it looks like. So this is going to be a slooooowwww build., to go no quicker than 11.5000001

Hottrucks,, those look to be MT Sportsmans. There a pretty stiff sidewall and depending oh how much the rear weight, 16-20 # might work. The hard compound is good for wear, but gave the WORST traction I ever saw in my truck. I went to a Hoosier Quick time 33x22.50-15 and picked up almost a 1/2 a second to the 60' cone over the Sportsman, ,,, same size and dropped psi to 12 at the track. Then moving to a Hoosier DOT QT Pro gave the best I've seen so far and I run 10.25# in them. All I can suggest is start HIGH and work down. Too low of a psi will cause the center of the tire to 'cup' and hurts traction, not help.

1Bad62Pro/Street · 02-27-2010, 08:29 PM

My Dad's Beast:
Big B► Photos► PROJECT ″TYRANNORAMBLER REX″
1969 AMC RAMBLER AMERICAN NOSTALGIA PRO/STREET
More Pictures here:
http://cid-9169aad55cfc6d79.skydrive...20REX%E2%80%B3

YouTube- PROJECT: "TYRANNORAMBLER...

YouTube- 1969 AMC RAMBLER AMERICAN NOSTALGIA...

midevil1 · 02-28-2010, 12:23 AM

Here are a few pics of my project.

Hottrucks · 02-28-2010, 09:03 AM

nice build...I see the panard bar is very short though and the wheels are close??

midevil1 · 02-28-2010, 11:02 PM

Quote:

Originally Posted by Hottrucks

nice build...I see the panard bar is very short though and the wheels are close??

When you are trying to fit 18.5 to 21" wide tire in the back..... I have only 3.5" of backspacing on my wheels. 1.5" clearance on the frame rails and 1" clearance on the outer fender lip. I cant stand the little tire in the HUGE wheel well look!

My axles from Strange are only 28 inchs long each.

Hottrucks · 03-01-2010, 09:22 AM

I was running a stock pbar and the swing was enough to piss me off my new bar goes from the PS outside fram to the outside of the trailiing arm..its like 42" long....My wheels are stock rallies that I had 6" added to the back space with stock front space....I'm waiting for them.... as soon as I get them painted and mount the tires so I can see if this is all going to work....I'm worried about tire hitting inner bed at dump?? my axles are stock..and open...booooo!!

1Bad62Pro/Street · 04-16-2014, 10:35 PM

https://www.youtube.com/watch?v=dCqlo1v3SSU

1Bad62Pro/Street · 10-03-2012, 08:37 AM

http://67-72chevytrucks.com/vboard/s...d.php?t=545476

renegade8720 · 10-07-2012, 06:11 AM

Hey Guys,

Here are a few pics of my current build.

Renegade

Super73 · 03-01-2010, 12:37 PM

Quote:

Originally Posted by midevil1

Here are a few pics of my project.

I might put a jack on the frame behind the fuel cell, pull the springs out. Put the truck at ride height, then lower it a few inches with the jack and see how close those tires come to the frame rail. I'd be concerned the when the PH bar is level, you might be touching tire to frame.

You might have already checked the geometry, but if not, better to find out now..

midevil1 · 03-01-2010, 04:17 PM

Quote:

Originally Posted by Super73

I might put a jack on the frame behind the fuel cell, pull the springs out. Put the truck at ride height, then lower it a few inches with the jack and see how close those tires come to the frame rail. I'd be concerned the when the PH bar is level, you might be touching tire to frame.

You might have already checked the geometry, but if not, better to find out now..

Truck has already been down the road for awhile. I have had the truck down even lower than it is now. I settled on this ride height because of the nice rake it has with the body lines. I do appreciate the concern.

Hottrucks · 03-01-2010, 07:05 PM

hey can anyone tell me how much they tubbed theres I have my bed apart for the fit but I'm looking at where my wheel well will be best I can figure I need about 41" that will put me even with the frame rails..I'm also conserned about the inner skin where it welds to the outside skin...am I going to have issues there??

1Bad62Pro/Street · 08-10-2015, 08:02 AM

https://hdwallpapers.cat/1955_chevy_...paper-1907634/

1Bad62Pro/Street · 08-10-2015, 08:17 AM

http://www.2040-cars.com/Chevrolet/O...custom-350651/

http://www.carsonline-ads.com/colsit...ostingID=74179

Hottrucks · 02-28-2010, 12:17 PM

hey guys I was out working on E brake cable stuff (I need it for inspection) what are you guys doing to get around the large amout of back spacing on the wheels??

I'm thinking of moving the clip that holds the cable on the trailing arm to the frame or futher back on the arm making the cable dive into the trailing arm sooner??

Jeff

1Bad62Pro/Street · 08-27-2015, 10:01 PM

protruck62
https://www.google.com/search?q=prot...&q=protruck62+

Racer382D · 11-15-2015, 11:07 PM

Quote:

Originally Posted by 1Bad62Pro/Street

protruck62
https://www.google.com/search?q=prot...&q=protruck62+

Is that steering wheel as close to the seat as it looks?

wwillmon · 11-15-2015, 11:30 PM

86 C10. 502 BBC

drag_72 · 02-28-2010, 02:19 PM

man im liking all these pics!! keep em comin!

casey g · 01-05-2013, 12:59 AM

dads truck

70blackfish · 06-15-2014, 03:51 PM

my 70 cuda

71Dragtruck · 02-28-2010, 06:47 PM

iceman3085 · 02-28-2010, 09:06 PM

my ride

rockvette · 03-05-2010, 12:13 AM

Running 33x18.5x17 9" back space 64 stepside

07-06-2012, 04:11 PM	#1
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! Teehee... __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

02-27-2010, 05:07 PM	#2
Marv D Registered Truck Offender Join Date: May 2008 Location: hells training ground (aka Ariz) Posts: 3,118	Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! 68c10,, yup 1bad62 Not really any good ones. This one from when it was a bottle baby, but it's not a great picture I made them. There nothing but .065 aluminum I bought at a scrap place, Kept dinking with a template till I had it close, then went to a buddy's shop and borrowed his manual brake. Took them out back and sanded them in one direction with 600 grit sandpaper, then lightly with 1000, and shot them with clear. Over the years the poor ol truck has seen so many changes and reconfigurations that there pretty full of holes for mounting ignitions, fuel regulators and what not. I'll get some pictures when I pull the motor it will be a little clearer. But have to trim and fit the motor plate before I pull it, loose the side mounts, etc. Going to have to build my own headers it looks like. So this is going to be a slooooowwww build., to go no quicker than 11.5000001 Hottrucks,, those look to be MT Sportsmans. There a pretty stiff sidewall and depending oh how much the rear weight, 16-20 # might work. The hard compound is good for wear, but gave the WORST traction I ever saw in my truck. I went to a Hoosier Quick time 33x22.50-15 and picked up almost a 1/2 a second to the 60' cone over the Sportsman, ,,, same size and dropped psi to 12 at the track. Then moving to a Hoosier DOT QT Pro gave the best I've seen so far and I run 10.25# in them. All I can suggest is start HIGH and work down. Too low of a psi will cause the center of the tire to 'cup' and hurts traction, not help. __________________ Still playin with trucks, even at my age! When you're dead, it's only a problem for the people around you, because you don't know you're dead. .....It's kinda the same when your STUPID. I just did my taxes and reviewed my SS statement. Thanks to the current administration it looks like I will only have to work till noon on the day of my funeral. Last edited by Marv D; 02-27-2010 at 05:55 PM.

02-28-2010, 12:23 AM	#4
midevil1 ShortBus KingPin Join Date: Feb 2010 Location: houston texas Posts: 146	Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! Here are a few pics of my project. Attached Images __________________ 67 shortstep prosteet. 505 BBC, FULL BILLET TH350, Owner built EVERYTHING.... (My RIDE) 2008 GMC Yukon DENALI, 425 AWHP, 5700LBS, 12.40's at 109mph. (Her RIDE) 2006 Kawasaki Brute Force, 916cc, 80 shot, 6.20's at 111 mph. (Her RIDE)

02-28-2010, 09:03 AM	#5
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! nice build...I see the panard bar is very short though and the wheels are close??

03-01-2010, 09:22 AM	#7
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! I was running a stock pbar and the swing was enough to piss me off my new bar goes from the PS outside fram to the outside of the trailiing arm..its like 42" long....My wheels are stock rallies that I had 6" added to the back space with stock front space....I'm waiting for them.... as soon as I get them painted and mount the tires so I can see if this is all going to work....I'm worried about tire hitting inner bed at dump?? my axles are stock..and open...booooo!! __________________ 1970 C10 CST fleetside 472 ....big dreams little cash... http://67-72chevytrucks.com/vboard/s...d.php?t=335721 SunShine Syndicate.. Mikes Sandwich Fair Run OCT 8th 2011 http://www.thesandwichfair.com/html/...auto_show.html

04-16-2014, 10:35 PM	#8
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! https://www.youtube.com/watch?v=dCqlo1v3SSU __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

10-03-2012, 08:37 AM	#9
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! http://67-72chevytrucks.com/vboard/s...d.php?t=545476 __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

10-07-2012, 06:11 AM	#10
renegade8720 Registered User Join Date: Nov 2007 Location: Kingsport, TN Posts: 193	Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! Hey Guys, Here are a few pics of my current build. Renegade Attached Images

03-01-2010, 07:05 PM	#13
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! hey can anyone tell me how much they tubbed theres I have my bed apart for the fit but I'm looking at where my wheel well will be best I can figure I need about 41" that will put me even with the frame rails..I'm also conserned about the inner skin where it welds to the outside skin...am I going to have issues there??

08-10-2015, 08:02 AM	#14
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! https://hdwallpapers.cat/1955_chevy_...paper-1907634/ __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

08-10-2015, 08:17 AM	#15
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! http://www.2040-cars.com/Chevrolet/O...custom-350651/ http://www.carsonline-ads.com/colsit...ostingID=74179 __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

02-28-2010, 12:17 PM	#16
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! hey guys I was out working on E brake cable stuff (I need it for inspection) what are you guys doing to get around the large amout of back spacing on the wheels?? I'm thinking of moving the clip that holds the cable on the trailing arm to the frame or futher back on the arm making the cable dive into the trailing arm sooner?? Jeff __________________ 1970 C10 CST fleetside 472 ....big dreams little cash... http://67-72chevytrucks.com/vboard/s...d.php?t=335721 SunShine Syndicate.. Mikes Sandwich Fair Run OCT 8th 2011 http://www.thesandwichfair.com/html/...auto_show.html

08-27-2015, 10:01 PM	#17
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! protruck62 https://www.google.com/search?q=prot...&q=protruck62+ __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

11-15-2015, 11:30 PM	#19
wwillmon Registered User Join Date: Jul 2013 Location: Midland, TX Posts: 60	Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! 86 C10. 502 BBC

02-28-2010, 02:19 PM	#20
drag_72 Ready to go fast!! Join Date: Aug 2008 Location: Carthage,Mo Posts: 219	Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! man im liking all these pics!! keep em comin! __________________ 454 block .30 forged aluminum pistons steel crank valve job Holley Strip Dominator intake 1030cfm holley carb, 250 plate shot roller rockers Erson Solid cam split duration 307/310. .575/.595 lift milodon oil pan fab. aluminum valve covers 4 bolt main splayed anodized caps all studded



Register or Log In To remove these advertisements.

01-05-2013, 12:59 AM	#21
casey g Registered User Join Date: Oct 2011 Location: Coeur d'alene ID Posts: 509	Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! dads truck

06-15-2014, 03:51 PM	#22
70blackfish Registered User Join Date: Oct 2012 Location: Newhall CA Posts: 1,195	Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! my 70 cuda Attached Images __________________ 69 SWB 780hp Hellcat powered, manual 6 speed, currie 9

02-28-2010, 06:47 PM	#23
71Dragtruck Registered User Join Date: Jun 2004 Location: Saskatchewan, Canada Posts: 1,368	Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! __________________ Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs

02-28-2010, 09:06 PM	#24
iceman3085 Registered User Join Date: Nov 2008 Location: ft pierce , fl Posts: 39	Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! my ride Attached Images

03-05-2010, 12:13 AM	#25
rockvette Registered User Join Date: Feb 2010 Location: Santa Fe,Texas Posts: 23	Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! Running 33x18.5x17 9" back space 64 stepside

Register or Log In To remove these advertisements.