Axle Options

[Mr. 250r]

Mine was quite a bit for my rear axle lol but I wanted everything on it nothing missing a low mileage piece it came with the g80 locker, disc brakes etc as for my front I'm running an 86 Dana 60 that was a bolt in setup all I needed was new spring plate and u bolts which I got from 4wdfactory, in your case you want one from a single wheel 3/4 ton truck a 1 ton the perches will have to be moved out
Posted via Mobile Device

[wade_ab]

Originally Posted by Mr. 250r

Mine was quite a bit for my rear axle lol but I wanted everything on it nothing missing a low mileage piece it came with the g80 locker, disc brakes etc as for my front I'm running an 86 Dana 60 that was a bolt in setup all I needed was new spring plate and u bolts which I got from 4wdfactory, in your case you want one from a single wheel 3/4 ton truck a 1 ton the perches will have to be moved out
Posted via Mobile Device

sounds good, thanks

ill have to start searching the bone yards. what gear ratio would most likely be in the 3/4 ton fronts?

[mcmlxix]

Originally Posted by wade_ab

sounds good, thanks

ill have to start searching the bone yards. what gear ratio would most likely be in the 3/4 ton fronts?

If you stick with 3/4 ton, just upgrade the outer assembly as described in the link above... If there's nothing wrong with the front axle, you would be taking a chance on an unknown part if you swap in another... I would guess 3.73 is common for the 3/4 ton... if you want to pay the $$ for a D60, I think the 4.10 is more common. Average asking price is $1000...

[Tex_50613]

any i've gotten have been from 3/4t with the sm465 and have been 4:10 or 4:11 ratio

[Mr. 250r]

Basically what mcm said but mine was 800$ I wasn't sure I over paid but it seems I didn't mine was 100% complete as well and my 86 D60 was 850$ with matching rear axle, everything I got all had 4.10s to match my stock gears which is what you'll find it most 3/4 tons or 3.73s
Posted via Mobile Device