need a pair of RARE ram-horn manifolds

[jewels.]

took the truck to meineke to change the manifold gaskets (for fear i would break a bolt if i did it myself).....

the ram-horn manifolds are cracked and need replaced....

no one in the area has a good set of used ones.... no one i called from the board suppliers has any either....

Tim Christian can sell me a new pair for $140 (OUCH!), but he had no used ones... he suggested i post on the board.... (thanks for the advice, tim!)

does anyone have a set of used ram-horm manifolds for a 350 chevy small block? (engine is originally from a 72 monte carlo donor)....

before you say "jewels, why not switch to HEADERS?", i have to tell you that headers probably wont fit because my engine mounts are swapped (drivers is on pass side, and pass side is on drivers side) ((its a long story)).... so the engine sits about 4 inches forward of its normal v8 position.... see pic below....

so it looks like i will have to stick with manifolds for now.... right?

does anyone have a set to sell me? i prefer good condition ones (i already have a set with cracks ).... i will have to have a machine shop clean them up, and check for flow and cracks, i assume.....

thanks for all the help in advance!
i wont be able to reply to this thread until after midnight CST cause i'm headed to work.....

ciao!
jewels.