VA Cheyenne super and Sierra grande emblems, & glovebox door

[VA72C10]

I honestly don't have one with good woodgrain other than the blue or black one which have the emblem low. The blue says dark blue on the spid label on the back and looks darker than your truck and not up to par with the quality of paint.

I'd do 125 shipped on one with bad woodgrain but include that aftermarket woodgrain aplique for you to put on and a good emblem. Let me know.

[72peace]

I'm sorry sir, I'm going to have to pass.

[VA72C10]

Originally Posted by DDixon1000

ok I am looking for a woodgrained black cheyenne super door. Could you pm me a pic? Thanks!

Still interested?

Originally Posted by supercheyenne1972

Jonathan do you just have A plain woodgrain glove box panel no emblem ? If not I will take one with emblem. Like too see a picture Thanks Ray

interested in any as is or restored?

Originally Posted by lolife99

Jonathon,.. is the black door actually a GMC door?
Notice the placement of the emblem is lower.
(closer to the bottom edge)

I think GMC and Chevrolet placed their emblems in a slightly different spot on the door.
I'm interested in the black door,... but I think it was originally a GMC door.

Any thoughts?

See above...says cheyenne super on the spid....are you interested or interested in one of the other doors restored?

[lolife99]

Originally Posted by VA72C10

See above...says cheyenne super on the spid....are you interested or interested in one of the other doors restored?

I'm going to pass.
If you get a really nice one let me know.
Thanks.

[VA72C10]

Originally Posted by lolife99

I'm going to pass.
If you get a really nice one let me know.
Thanks.

Will do! Thanks for letting me know!

[skrenly]

I will give you $125. for the sierra grande bed emblems, and wood grain glove box door with sierra grande emblem.

[VA72C10]

Originally Posted by skrenly

I will give you $125. for the sierra grande bed emblems, and wood grain glove box door with sierra grande emblem.

I'd do 175 shipped to you. That's 50 less than I was asking so meeting you half way

[VA72C10]

No problem. If I end up with a nicer original I'll check and see if you've found one...

[supercheyenne1972]

Jonathan I'm going to pass thanks anyway. The one I have is in better shape. Thanks Ray

[72peace]

Jonathon, What would it cost to have the vinyl guy install the repop vinyl on the door? I'm sure his fee would be the same regardless, but it would save me the cost of the OEM vinyl. Since this is a daily driver I'm not going for totally original, just close.

Cheers,

[VA72C10]

Originally Posted by 72peace

Jonathon, What would it cost to have the vinyl guy install the repop vinyl on the door? I'm sure his fee would be the same regardless, but it would save me the cost of the OEM vinyl. Since this is a daily driver I'm not going for totally original, just close.

Cheers,

I don't see it being more than $20 and I'd cover anything over.

[VA72C10]

I'd make it an even 140 shipped for the panel with the aftermarket woodgrain installed with a good emblem. Let me know.

[72peace]

I know I'm stretching it but could you throw in the 72 bezel repop vinyl for that as well? Still convincing my finance officer this is a need.

[VA72C10]

Originally Posted by 72peace

I know I'm stretching it but could you throw in the 72 bezel repop vinyl for that as well? Still convincing my finance officer this is a need.

I like a deal so I'll pass one on to you...I will throw in the bezel piece also.
pm sent with payment info...

[72peace]

Dare I hope, with the vinyl installed on the bezel as well?!?!? OMG! Money will be in-route momentarily.

(Sorry, I read that wrong. by bezel piece you meant vinyl not bezel aluminum piece) money in-route.

[VA72C10]

Originally Posted by 72peace

Dare I hope, with the vinyl installed on the bezel as well?!?!? OMG! Money will be in-route momentarily.

(Sorry, I read that wrong. by bezel piece you meant vinyl not bezel aluminum piece) money in-route.

yes, vinyl piece for the bezel...if I threw in a bezel I'd almost be paying you

[72peace]

Thanks for the deal. PP sent.

Prefer the one with no dents.

Thanks,

[VA72C10]

Originally Posted by 72peace

Thanks for the deal. PP sent.

Prefer the one with no dents.

Thanks,

Here's the finished product. Came out really nice! Boxed up ready to ship out

[VA72C10]

I will get it over to the shop monday..not sure if he'll do it then or I'll have to drop it off. Will ship as soon as it's done and will pm you with tracking info.

[VA72C10]

ttt

[72peace]

Received pieces, thanks. How would I get the vinyl to lay down around the lock? Maybe heat it up and stretch it or would that mess it up?

Cheers,

[VA72C10]

Originally Posted by 72peace

Received pieces, thanks. How would I get the vinyl to lay down around the lock? Maybe heat it up and stretch it or would that mess it up?

Cheers,

When installing the lock I would slightly cut the edges around the lock with an exacto or razor to allow the lock to fit then you can heat it and press the lock in...the lock will hold down the woodgrain. I didn't have a nicely polished lock and wasn't sure if yours was a button or keyed anyways or I would have installed it....but once it goes in, it can damage the woodgrain applique coming back out.

[VA72C10]

ttt...prices reduced and new items added

[VA72C10]

ttt

[lolife99]

Interested in the woodgrain decals if you have more.
(both the dash bezel and the glovebox door)