GA 1972 big block truck parting out - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

longhorn70gmc · 11-08-2011, 07:26 PM

Quote:

Originally Posted by heehawracing

i will look at them and let you know
thanks

Thanks HEEHAW!
r/

72 Blazer CST · 11-08-2011, 07:29 PM

Quote:

Originally Posted by heehawracing

Door panels are fair I will post pic. Soon the dash pad is nice it's black look to good to be gm it's most likely aftermarket 50.00 shipped
Posted via Mobile Device

Would you go $75 shipped on the dash and steering with it being a repo? I have a Chevy button, I wont need the GMC button. Thanks.

**DANTIP** · 11-08-2011, 07:55 PM

I will take the smog parts (please include all of the bolts with the brackets). Also if the carb is 7042218, I'll take it (please include the choke heat unit, idle stop solenoid, and mounting bolts). Please ask the buyer of the manifolds if they want the tubes (I may even trade them plugged manifolds or manifolds without holes if they are interested). Thanks!!

**heehawracing** · 11-08-2011, 08:02 PM

i ran out to check the numbers on the carb because i knew that question was next bad news it has been changed it is a 7043202

**DANTIP** · 11-08-2011, 08:08 PM

I'll take it and hopefully you can give me a break on combined shipping. No problem.

**heehawracing** · 11-08-2011, 08:11 PM

i will pm you with a total

**heehawracing** · 11-08-2011, 08:13 PM

Quote:

Originally Posted by DANTIP

I'll take it and hopefully you can give me a break on combined shipping. No problem.

did you want the carburator

**DANTIP** · 11-08-2011, 09:18 PM

Yes I want the carb.

Thanks!

kellytheaker · 11-08-2011, 09:30 PM

condition of the vent windows and interested in tinted . and side mouldings top and bottom - condition ?

HDBOB · 11-09-2011, 01:32 AM

I'll go for the tailgate. If Complete.

HDBOB · 11-09-2011, 01:46 AM

also interested in the rh vent window if Kelly doesn't want. and maybe a PS pulley ?

slammer72 · 11-09-2011, 02:23 AM

Any savable black belts?if so im interested.
Posted via Mobile Device

**DANTIP** · 11-09-2011, 08:08 AM

I'll do the motor mounts/stands, alternator brackets/bolts, and PS setup if you can go to $350 shipped. Let me know!

Thanks!!

**heehawracing** · 11-09-2011, 08:45 AM

Quote:

Originally Posted by DANTIP

I'll do the motor mounts/stands, alternator brackets/bolts, and PS setup if you can go to $350 shipped. Let me know!

Thanks!!

hi yes i will do that

**heehawracing** · 11-09-2011, 08:48 AM

Quote:

Originally Posted by HDBOB

I'll go for the tailgate. If Complete.

hi the tailgate comes complete teeitup is going to let me know today if he wants it you are next in line i will let you know today
thanks

**heehawracing** · 11-09-2011, 08:49 AM

Quote:

Originally Posted by slammer72

Any savable black belts?if so im interested.
Posted via Mobile Device

in has black seat belts i will post pictures soon

**heehawracing** · 11-09-2011, 08:50 AM

i am heading to the shop now i will get more pictures and post them
thanks

jtj143 · 11-09-2011, 09:00 AM

Do you have GMC hood letters? How about headlight bezels? Horn?

Thanks!

**heehawracing** · 11-09-2011, 10:31 AM

more pic
45.00 shipped on the glove box door
sierragrande emblums 25.00 shipped

projectjimmie68 · 11-09-2011, 10:33 AM

How much for the complete wiring harness from fire wall forward plus shipping? Thanks Projectjimmie

**heehawracing** · 11-09-2011, 11:02 AM

Quote:

Originally Posted by projectjimmie68

How much for the complete wiring harness from fire wall forward plus shipping? Thanks Projectjimmie

wiring harness 60.00 shipped i look it over looks great

slammer72 · 11-09-2011, 12:03 PM

Ok is that lower trim woodgrain or black I cant tell?????
Posted via Mobile Device

projectjimmie68 · 11-09-2011, 01:47 PM

That wiring harness is off a GMC, right?

**heehawracing** · 11-09-2011, 01:56 PM

Quote:

Originally Posted by projectjimmie68

That wiring harness is off a GMC, right?

Yes it is a gmc
Posted via Mobile Device

c1069 · 11-09-2011, 02:44 PM

any pics from sun visors....How are they? Price?

11-08-2011, 07:55 PM	#28
DANTIP Registered User Join Date: Sep 2001 Location: Fort Wayne, Indiana, USA Posts: 1,885	Re: 1972 big block truck parting out I will take the smog parts (please include all of the bolts with the brackets). Also if the carb is 7042218, I'll take it (please include the choke heat unit, idle stop solenoid, and mounting bolts). Please ask the buyer of the manifolds if they want the tubes (I may even trade them plugged manifolds or manifolds without holes if they are interested). Thanks!!

11-08-2011, 08:02 PM	#29
heehawracing Senior Member Join Date: Jun 2010 Location: senoia ga Posts: 3,202	Re: 1972 big block truck parting out i ran out to check the numbers on the carb because i knew that question was next bad news it has been changed it is a 7043202

11-08-2011, 08:08 PM	#30
DANTIP Registered User Join Date: Sep 2001 Location: Fort Wayne, Indiana, USA Posts: 1,885	Re: 1972 big block truck parting out I'll take it and hopefully you can give me a break on combined shipping. No problem.

11-08-2011, 08:11 PM	#31
heehawracing Senior Member Join Date: Jun 2010 Location: senoia ga Posts: 3,202	Re: 1972 big block truck parting out i will pm you with a total

11-08-2011, 09:18 PM	#33
DANTIP Registered User Join Date: Sep 2001 Location: Fort Wayne, Indiana, USA Posts: 1,885	Re: 1972 big block truck parting out Yes I want the carb. Thanks!

11-08-2011, 09:30 PM	#34
kellytheaker Registered User Join Date: Dec 2009 Location: ontario Canada Posts: 412	Re: 1972 big block truck parting out condition of the vent windows and interested in tinted . and side mouldings top and bottom - condition ?

11-09-2011, 01:32 AM	#35
HDBOB Registered User Join Date: Jan 2011 Location: laconia NH Posts: 196	Re: 1972 big block truck parting out I'll go for the tailgate. If Complete.

11-09-2011, 01:46 AM	#36
HDBOB Registered User Join Date: Jan 2011 Location: laconia NH Posts: 196	Re: 1972 big block truck parting out also interested in the rh vent window if Kelly doesn't want. and maybe a PS pulley ?

11-09-2011, 02:23 AM	#37
slammer72 Registered User Join Date: Oct 2011 Location: Gresham oregon Posts: 309	Re: 1972 big block truck parting out Any savable black belts?if so im interested. Posted via Mobile Device

11-09-2011, 08:08 AM	#38
DANTIP Registered User Join Date: Sep 2001 Location: Fort Wayne, Indiana, USA Posts: 1,885	Re: 1972 big block truck parting out I'll do the motor mounts/stands, alternator brackets/bolts, and PS setup if you can go to $350 shipped. Let me know! Thanks!!

11-09-2011, 08:50 AM	#42
heehawracing Senior Member Join Date: Jun 2010 Location: senoia ga Posts: 3,202	Re: 1972 big block truck parting out i am heading to the shop now i will get more pictures and post them thanks

11-09-2011, 09:00 AM	#43
jtj143 Registered User Join Date: Jun 2010 Location: Dotsonville, Tennessee Posts: 194	Re: 1972 big block truck parting out Do you have GMC hood letters? How about headlight bezels? Horn? Thanks! __________________ '65 GMC Suburban 4X4, '71 GMC 4X4 LWB - The Yellow Eyed Monster, '86 C10 Silverado - Oldest Daughter's Pickup, '88 S15 GMC Work Truck, '95 GMC SLE 4X4 - Second Daughter's Truck, '99 K1500 GMC Suburban Road Trip Machine, 2000 C2500 W/T Utility Bed Work Truck, '03 Silverado - Wife's Grocery Getter

11-09-2011, 10:31 AM	#44
heehawracing Senior Member Join Date: Jun 2010 Location: senoia ga Posts: 3,202	Re: 1972 big block truck parting out more pic 45.00 shipped on the glove box door sierragrande emblums 25.00 shipped Attached Images

11-09-2011, 10:33 AM	#45
projectjimmie68 Registered User Join Date: Oct 2009 Location: Flagler Beach,Fl. Posts: 455	Re: 1972 big block truck parting out How much for the complete wiring harness from fire wall forward plus shipping? Thanks Projectjimmie

11-09-2011, 12:03 PM	#47
slammer72 Registered User Join Date: Oct 2011 Location: Gresham oregon Posts: 309	Re: 1972 big block truck parting out Ok is that lower trim woodgrain or black I cant tell????? Posted via Mobile Device



Register or Log In To remove these advertisements.

11-09-2011, 01:47 PM	#48
projectjimmie68 Registered User Join Date: Oct 2009 Location: Flagler Beach,Fl. Posts: 455	Re: 1972 big block truck parting out That wiring harness is off a GMC, right?

11-09-2011, 02:44 PM	#50
c1069 Registered User Join Date: Apr 2010 Location: McFarland CA Posts: 1,392	Re: 1972 big block truck parting out any pics from sun visors....How are they? Price? __________________ Pancho 69 c/10 step side 454/400 with 3.07

Register or Log In To remove these advertisements.