Help W/ Rear Seat

[LUV2XCLR8]

Thanks, So I Need A Burb 3rd Row Seat Bracket W/ A Bolt Hole.

[earl87gta]

I have a spair blazer seat if you needed it let me know Im in Johnson city TN now.

[LUV2XCLR8]

HOW MUCH, AND DOES IT HAVE THOSE STYLE OF BRACKETS

[LUV2XCLR8]

Still Need One Bracket, Buy Or Trade, Please Help

[bouncytruck]

There is a complete rear seat on e-bay right now. It must be made of gold considering the opening bid is $400!

http://cgi.ebay.com/ebaymotors/ws/eB...category=34206

[LUV2XCLR8]

Originally Posted by bouncytruck

There is a complete rear seat on e-bay right now. It must be made of gold considering the opening bid is $400!

A LIL BIT HIGH FOR ME, I NOTICED IN THE PICS THAT THE BRACKETS ON
THE BACK OF THE REAR SEAT LOOK DIFFERENT THAN MINE, NOW I'M

[LUV2XCLR8]

I'M STILL LOOKING FOR ONE MORE BRACKET, IF I HAD 4 MATCHING ONES I
COULD GO AWAY FROM THE END HOLES ON THE OUTSIDE, I'M THINKING OF
LEAVING OF THE ARM RESTS WHICH WOULD ALLOW THE SEAT TO FOLD
FORWARD FOR EXTRA STORAGE IN THE BACK WHEN NEEDED, THAT WAY ALL
THE SEAT BELTS WOULD BOLT TO THE FLOOR BRACKETS AND I COULD RUN
3 SETS ACROSS (CENTER FOR SMALL KIDS) LIKE IN MOST FULL SIZE CARS
THAT COME WITH A BENCH IN THE REAR (LIKE MY OLD 96 IMPALLA SS HAD)
I'M DEAD SET ON USING FOUR BRACKETS BECAUSE OF PIC #3 BELOW. ALSO
PIC'S #1 AND #2 ARE CLOSE UPS OF THE BRACKET I'M LOOKING FOR.

[smokekiki]

I have a stock 71 suburban.The rear seat has 4 legs in the rear.The outside 2 are not drilled for belts.The belts are mounted to the side of the seat.The center 2 are threaded for the belts.On my 72 blazer the outside 2 legs are tapped for the belt,There aren't any center legs.It has 1 belt that is long enough to go across 3 people at once!this is stock.i am the 2nd owner.The belt has the gm tags.

[LUV2XCLR8]

Thanks Smokekiki, I'm Aware Of What The Stock Set-up Is, However
I Want To Deter From Oe Slightly & Run W/o The End Bolts In Use, I
Am Just Looking For One More Threaded Bracket To Match The Three
I Already Have, If You Look Above I'm Removing The Armrest Totally
And Using A Spacer To Make The End Bolts Pivot Or So The Seat Will
Fold Forward In Extreme Storage Issues, Then I'm Just Going To Do
3 Lap Belts By Using The Threaded Bolt Holes On The Four Brackets.

[bouncytruck]

Looks just like the bed of my '72 but the two center holes are a different diameter bolt hold and the belts bolt directly to the floor. They are angled at the end to mount to the floor and have a plastic cover over the ends and the bolt. The two outside belts bolt to the brackets similar to what you are looking.

I don't think the seats fold forward without the armrests. My seat was shipped across country when I bought it with the armrest off and it didn't fold forward at all. I also moved it all around the garage and sat on it without the armrests on and it was solid.

Is it possible your seat is from a later model Blazer?

Honestly, I'm surpised you haven't found any yet.

[LUV2XCLR8]

Originally Posted by bouncytruck

I don't think the seats fold forward without the armrests. My seat was shipped across country when I bought it with the armrest off and it didn't fold forward at all. I also moved it all around the garage and sat on it without the armrests on and it was solid.
_____________________________________________________________

Honestly, I'm surpised you haven't found any yet.

I LOOKED AT THE SEAT AND IT LOOKS LIKE W/ A SMALL BIT OF MOD WORK
IT WILL FOLD FORWARD, AND YES, I'M SURPRISED ALSO, I KEEP GETTING A
OFFER ON COMPLETE BENCH SEATS, I EVEN OFFERED TO TRADE 1 FOR 1.

[earl87gta]

Pay me for shipping and you can have one of the brackets I only keep the seat around incase some one sitts in back of the wifes truck and that doesnt happen to often so I dont mind it going or if you feel like a road trip next time Im in merfreesburo we can meat and you can pic up the seat.

[LUV2XCLR8]

HOW FAR IS MURF FROM JACKSON

[donkey69]

hey-on your picture the bolt holes labeled "no damn idea"-on my 72 they are used on a small hold down with a spring attached to hold the jack. Just my two cents........

[LUV2XCLR8]

Originally Posted by donkey69

hey-on your picture the bolt holes labeled "no damn idea"-on my 72 they are used on a small hold down with a spring attached to hold the jack. Just my two cents........

THANK YOU, EVER SEEN ONE OF THOSE HOOP? CARRIERS FOR SALE

[LUV2XCLR8]

Ttt

[earl87gta]

sorryit been so loong I have serggery tomarrow so ive been of line murf is abougt 30 miles south of nash. if all you need is the bracket I can unbolt it and send it to you.

[LUV2XCLR8]

Originally Posted by earl87gta

sorryit been so loong I have serggery tomarrow so ive been of line murf is abougt 30 miles south of nash. if all you need is the bracket I can unbolt it and send it to you.

Earl, after a more in depth look and a lil research I found out I really need
two, one of mine is a modified bracket, so I only have two with the square
nut on the back, would like four, I could trade you my two for two of yours
if you have them and are willing to part with them, I might be going to the
Opry Mills on the 26th with my wife, if I do I could get away and meet you
somewhere to swap them out two for two, just let me know if you have 2

[saulgoode]

Why can't you drill a hole in your bracket and weld a nut to the other side?

[LUV2XCLR8]

Originally Posted by saulgoode

Why can't you drill a hole in your bracket and weld a nut to the other side?

CAN'T FIND THE SQUARE NUTS ANYWHERE

I've looked at body shop supply places, lowes, homedepot, fastener
distributers, etc.... I can't seem to find these large square style nuts
anywhere, got any ideas on where I could find them

[PICKMUP]

Teamharvey: You can have first call at $50 boxed & shipped...after that anyone.

[teamharvey]

Thanks so much !, but I grabbed the pair on ebay a week or so ago. These are in much better shape so somebody will get a great deal.

Thanks,
Bret