Parting 6 (+ Or -) 67-72's You Need ? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

big blue 72 · 12-21-2004, 11:16 PM

lookin for a power steering setup for a 250/straight 6
thanks.

67stepside · 12-21-2004, 11:26 PM

Do you have any good headlight bezels 67-68?

justascatch · 12-21-2004, 11:42 PM

67 Stepside- will have bezels in 3-4 days, check back w/ me.

Big Blue- No 6 cyl stuff for you, sorry. Last 6 cyl I had, ran, drove, no smoke, no knock, nobody would steal it. Finally sold for $ 20 U.S. dollars !!

67stepside · 12-21-2004, 11:48 PM

I will. Put me first in line. Thanks

justascatch · 12-22-2004, 11:55 AM

Snowing Today In Oklahoma- Meteroligists Were Right For The 1st Time In '04
For All Of You Waiting For Pics, I'm Working On It...

justascatch · 12-22-2004, 10:00 PM

Please Pm Or E-mail Your E-mail Address And I Will Send Pics...

3 on the tree · 12-22-2004, 11:41 PM

I'm looking for a 70 steering wheel in decent shape. Mine is falling apart due to the sun baking all the plastic off it. Have a good horn button. Mine is kinda light beige/off white, will consider other colors. Thanks. Born in Shawnee, raised everywhere else.

Bob Moore · 12-23-2004, 02:07 AM

Looking for 72 BB frame stands/motor mounts?

Need stands only but will take whole set-up if you have it.

Shipped to 98407

Thanks - Bob

pat · 12-23-2004, 04:07 AM

Whats the story on the 350? I may need one, but all I would need is the block so if its not complete or anything then good..

justascatch · 12-23-2004, 10:18 AM

3 on the tree- all steering wheels were trash

Bob Moore- no stands

pat- 350 3970010 casting, 4 bolt main. I don't tear them down, so heads, balancer, flywheel, intake, valve covers still on. Did pull pan to check 2 bolt or 4. Has spun bearing and 1 for sure, maybe 2 bent rods. Cylinder walls not ruined. No obvious cracks, freeze plugs intact, had green anti-freeze when pulled. I don't keep them unless I think they can be rebuilt.
Let me know.
Scratch

meathead95 · 12-23-2004, 10:37 AM

if you will ship greyhound i am interested in a set of RUST FREE 72 doors if so please send pics to meathead95@hotmail.com

justascatch · 12-23-2004, 01:46 PM

SORRY, MEAT
THE 72 DOORS SOLD TO THE GREAT STATE OF MINNESOTA.
SCRATCH

Quote:

Originally Posted by meathead95

if you will ship greyhound i am interested in a set of RUST FREE 72 doors if so please send pics to meathead95@hotmail.com

67stepside · 01-05-2005, 10:46 PM

Hi, Just checking back on the 67-68 headlight bezels

wannabeburbowner · 01-06-2005, 12:28 AM

do you still have the trailing arms?? If so how much??
I have non power disc brakes, do you have the stuff to switch to power discs??
Do you still have a solid tailgate for a fleetside??
Any good metal you could cut up?? Floors, rockers, cab corners??
Pictures?? Send to ss1985monte@hotmail.com

Thanks,

Travis

72GMC51 · 01-06-2005, 11:44 PM

Looking for a vent window frame drivers side 72 GMC, just the frame not the whole assembly, painted not chrome.
Thanks

RainFade · 01-15-2005, 05:12 PM

Quote:

Originally Posted by RainFade

I could use an excellent drivers front fender for a 69-72 chevy if you have it.

Got my fender today (delay was my personal check clearing not on Ken's end).... WOW it is in GREAT shape, the price was super reasonable and he does a great job of keeping you updated and answering questions in a timely fashion.

jamesi20 · 01-15-2005, 10:49 PM

pm sent

12-21-2004, 11:42 PM	#28
justascatch Justascratch Join Date: Jun 2004 Location: OKC, OK Posts: 160	67 Stepside- will have bezels in 3-4 days, check back w/ me. Big Blue- No 6 cyl stuff for you, sorry. Last 6 cyl I had, ran, drove, no smoke, no knock, nobody would steal it. Finally sold for $ 20 U.S. dollars !! __________________ justascratch-OKC,OK

12-22-2004, 11:55 AM	#30
justascatch Justascratch Join Date: Jun 2004 Location: OKC, OK Posts: 160	Snowing Today In Oklahoma- Meteroligists Were Right For The 1st Time In '04 For All Of You Waiting For Pics, I'm Working On It... __________________ justascratch-OKC,OK

12-22-2004, 10:00 PM	#31
justascatch Justascratch Join Date: Jun 2004 Location: OKC, OK Posts: 160	More Pics Available Now Please Pm Or E-mail Your E-mail Address And I Will Send Pics... __________________ justascratch-OKC,OK

12-23-2004, 02:07 AM	#33
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Looking for 72 BB frame stands/motor mounts? Need stands only but will take whole set-up if you have it. Shipped to 98407 Thanks - Bob __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

12-23-2004, 04:07 AM	#34
pat Senior Member Join Date: Jul 2002 Location: Lindsay, TX Posts: 1,245	Whats the story on the 350? I may need one, but all I would need is the block so if its not complete or anything then good.. __________________ 68 Chevy 383/350 w/shift kit, 380hp/425ft-lbs, 4.5/5 drop, 17" TT2s 64 Cadillac Sedan DeVille

12-21-2004, 11:16 PM	#26
big blue 72 Senior Member Join Date: May 2002 Location: hamilton,ohio,usa Posts: 1,499	lookin for a power steering setup for a 250/straight 6 thanks.

12-21-2004, 11:26 PM	#27
67stepside Registered User Join Date: Jan 2002 Location: Columbus, IN. USA Posts: 140	Do you have any good headlight bezels 67-68?

12-21-2004, 11:48 PM	#29
67stepside Registered User Join Date: Jan 2002 Location: Columbus, IN. USA Posts: 140	I will. Put me first in line. Thanks

12-22-2004, 11:41 PM	#32
3 on the tree Registered User Join Date: Oct 2004 Posts: 393	I'm looking for a 70 steering wheel in decent shape. Mine is falling apart due to the sun baking all the plastic off it. Have a good horn button. Mine is kinda light beige/off white, will consider other colors. Thanks. Born in Shawnee, raised everywhere else.

12-23-2004, 10:18 AM	#35
justascatch Justascratch Join Date: Jun 2004 Location: OKC, OK Posts: 160	3 on the tree- all steering wheels were trash Bob Moore- no stands pat- 350 3970010 casting, 4 bolt main. I don't tear them down, so heads, balancer, flywheel, intake, valve covers still on. Did pull pan to check 2 bolt or 4. Has spun bearing and 1 for sure, maybe 2 bent rods. Cylinder walls not ruined. No obvious cracks, freeze plugs intact, had green anti-freeze when pulled. I don't keep them unless I think they can be rebuilt. Let me know. Scratch __________________ justascratch-OKC,OK

12-23-2004, 10:37 AM	#36
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	if you will ship greyhound i am interested in a set of RUST FREE 72 doors if so please send pics to meathead95@hotmail.com __________________ 72 2wd blazer 72 swb 4x4

01-05-2005, 10:46 PM	#38
67stepside Registered User Join Date: Jan 2002 Location: Columbus, IN. USA Posts: 140	Hi, Just checking back on the 67-68 headlight bezels

01-06-2005, 12:28 AM	#39
wannabeburbowner Registered User Join Date: Dec 2004 Location: New Philadelphia, Ohio Posts: 253	do you still have the trailing arms?? If so how much?? I have non power disc brakes, do you have the stuff to switch to power discs?? Do you still have a solid tailgate for a fleetside?? Any good metal you could cut up?? Floors, rockers, cab corners?? Pictures?? Send to ss1985monte@hotmail.com Thanks, Travis __________________ 71 Chevy Long Bed (gettin' bagged) 84 GMC K1500 (Sold) 85 Monte Carlo SS white w/gray int. (being a dumba** and totaled it ) 85 Monte Carlo SS clone T-top (Sold) 72 Chevelle-tubbed 64 Buick Sportwagon

01-06-2005, 11:44 PM	#40
72GMC51 72GMC51 Join Date: Jul 2004 Location: Minnesota Posts: 233	Looking for a vent window frame drivers side 72 GMC, just the frame not the whole assembly, painted not chrome. Thanks __________________ 72 GMC 2wd 1/2 long 350 700r4 A/C PS PB 4:10. Are they ever really finished

01-15-2005, 10:49 PM	#42
jamesi20 Senior Member Join Date: May 2002 Location: NORTHEAST OHIO Posts: 493	pm sent



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.