Those who cut dash for a CD player, I have questions. - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Desert Rat** · 04-08-2002, 04:04 AM

I got a plastic underdash mount for no knob stereos,i bought it at one of the big stores WalMart Kmart or something,its black mounts under the dash think it was like $10-its a nice frame for a deck you could mount anywhere on your roof,under your dash,seat,console-but id make it easy to reack under the seat or in glovebox sounds like a real pain in the arsehole.I got a nice Kenwood tape deck that fits the truck nice,i just thought about addaing a CD changer in my console box,then some amps under the seat,couple 10's behind the seat some mids and tweets,a trunk could sound pretty good easily its a small space,but probably need to lose the gas tank for big speakers,heck make it humb how about a couple 18's in the back!!!!

lofly'a · 04-08-2002, 06:14 AM

i installed mine in the glove box on my gto, cuz i did't want to cut the dash and cuz with a ragtop it stayed a lot cleaner and drier behind the door. you wouldn't believe how much dust gets in my fair weather only friend. i hate operating it though, just listen to whatever comes on or plays next.

------------------
keep fly'in lo
66 gto ragtop 389/400
72 blazer (wuza4by)
68 swb fleet 350/700
98 tahoe 2dr (daily ride)

imaindianoutlaw · 04-08-2002, 09:04 AM

Who needs a freakin stereo when you have the great sound of a v8?

------------------
Charles W. Hein
S. Williamsport PA

imaindianoutlaw@yahoo.com

REFRIGERATION TECH

1971 Rolling chassis

FOR SALE
1963 Pontiac Tempest
1965 Pontiac GTO
1956 Pontiac 2 dr

Burlinator · 04-08-2002, 09:41 AM

why regret it fixing would be no different than any other body work sure be a helluva lot easier then doing rockers or cab corners mine was cut when I got it so I just slapped a new deck in and a changer under the seat I would only change back if I got one of those decks with the chevy bowtie on the doorflap hehehe

------------------
My CANADA includes BEAVER!!!!!!!
[img]http://communities.msn.com/_Secure/0NwAzABASh!uohRSfISjhQyAQFlB*NewhOUaHR6bv*u3evbZdsgR9IvkX4X4GCQKh*KzIWBO9**DLq1ZpIJppCQ/Chevy_anim(1).gif[/img]

71 Custom/10 lb fleet .040 over 350/

burlinator2000@hotmail.com
Richmond,B.C.

[This message has been edited by Burlinator (edited April 08, 2002).]

Duffy · 04-08-2002, 03:29 PM

I'm with Desert Rat - mouned under the dash. You can buy a plastic enclosure from Crutchfield that mounts really nice below and to the right of the steering column. Works well, out of site and surprisingly is not in the way, although you would think it was by looking at it. Very good alternative.

Don't cut it!

Duffy

------------------
71 K-10 Short/Wide

**guyryan100** · 04-08-2002, 04:09 PM

Imagine if the original owner had cut a big hole to install his 4-track player. I bet you'd really wish THAT hole wasn't there.

I'd really consider getting a reproduction original that can play CD's. Then you aren't cutting holes, have a good looking factory-style radio, and can still plan CD's.

Probably costs a small fortune, but a wise investment in my book.

**KevsClassics** · 04-09-2009, 11:37 PM

Quote:

Originally Posted by REPO1

I have seen in quite a few pics that alot of people on here have cut the dash to install an aftermarket CD player.

Question I have is do you regret it now? Do you wish you hadn't cut it? That is what I am trying to decide right now. The original part of me want to leave it as is, and install a factory radio in there, then use a CD changer. But the more modern me want to cut it and install an up-to-date CD player.

I have also thought about making a custom little box to install the CD player in the glove box instead. What are your guys opinions?

Any pics of custom setups?

Thanks!

------------------
Sylvan Lake, Alberta, Canada

1970 Chevy C20 Custom Camper
402BB Turbo 400 trans.
A/C, P/S, manual brakes.
75,800 Original Miles!!
'71 Camaro SS 402/T400 resto
'97 Z28 -- Runs 11.5 @ 118mph.

So did you cut it?

*Shane* · 04-09-2009, 11:50 PM

Someone didn't get enough attention as a child.

CG · 04-10-2009, 12:09 AM

Thread from 2002??? Whats with digging out all the old threads lately?

And how the heck do you access them in the first place?

berencam · 04-10-2009, 12:14 AM

So whats with resurecting 7 year old threads? Instead of setting your forum options to only show threads in the last year do you have it to only show 7 year old thread?

CG · 04-10-2009, 12:20 AM

Hmmm, I just found where you can do it. This is odd because I didnt think you used to be able to go back that far...kinda cool.

67CHIP72 · 04-10-2009, 12:21 AM

Seems like you could mount one with a custom bracket using the existing holes below the dash. The spot where some mount a CB Radio. You might even make it a quick realease(unplug) to stash it under the seat when parked.

67CHIP72 · 04-10-2009, 12:28 AM

Good Gravy, I didn't even bother to look at original post date. Guess that dash is probably already cut.

**KevsClassics** · 04-10-2009, 12:33 AM

Quote:

Originally Posted by 67CHIP72

Good Gravy, I didn't even bother to look at original post date. Guess that dash is probably already cut.

That's what I want to know.

Mudder · 04-10-2009, 05:33 AM

I cut mine since this thread was started.

Glad I did.

***Liz*** · 04-10-2009, 08:28 AM

It would be much easier to start a new post on the subject. Folks come and go, and tastes change. Old threads are great ref tools, but bringing them to the top over and over usually will not get you as much information as just asking a new question.

Andy4639 · 04-10-2009, 09:02 AM

I have a 71 and yes I cut the dah. What is the big deal? You have modified the engine,wheels,tires,transmission everything under the sun has been modified one way or another. Cut it and enjoy. Just my 2 cents worth.

big_al_71 · 04-10-2009, 09:11 AM

As Andy stated I am one of those that has done alot of changes to my bucket and cutting the dash was not a big deal for me....

oldblue1968chevy · 04-10-2009, 10:01 AM

mine was alrady cut otherwise i wouldnt have cut it...o well gotta nice cd player in there now...

REPO1 · 04-10-2009, 10:12 AM

Quote:

Originally Posted by 67CHIP72

Good Gravy, I didn't even bother to look at original post date. Guess that dash is probably already cut.

Quote:

Originally Posted by KevsClassics

That's what I want to know.

NOPE! I didn't cut it!

kelsfine69 · 04-10-2009, 10:46 AM

Good for you...I put mine in the glovebox and It works well. Theres an old thread on here somewhere how I did it. Not as old as this thread Tho

**71blksuper4x4** · 04-10-2009, 10:51 AM

Man, you tend to forget about some of the old guys on here. I haven't heard the name Desert Rat in 4-5 years. Long live this site and the people who share the addiction. Trevor

*Shane* · 04-10-2009, 12:36 PM

Quote:

Originally Posted by KevsClassics

That's what I want to know.

PM's work great for just such an occasion.

Beatcoaster · 04-10-2009, 03:42 PM

A thread back from the dead!

The previous owner of mine cut the dash(did a good job too) and cut a spot for 6x9's in the doors - so at this point why not take it to the next level!

I have some speakers from my old subaru and am using them. Polk db components in the dash with both 5-1/4's next to each other free air under the stock grill and am flush mounting the tweeters just behind the dash pad so they reflect up off the windshield. I have some Polk mmc690's for the doors and am planning on running (4) 6-1/2" Tang Band subwoofers in some boxes I will make under the bench seat if there isn't enough low end...I am undecided on the headunit and amps at this point but it will sound great regardless!

68caliRat · 04-10-2009, 08:09 PM

Quote:

Originally Posted by imaindianoutlaw

Who needs a freakin stereo when you have the great sound of a v8?

Amen Brother!

BBC with headers and dual 40" glass packs is my listening pleasure!

04-08-2002, 06:14 AM	#27
lofly'a Registered User Join Date: May 2000 Location: Alexandria, LA 71301 Posts: 1,451	i installed mine in the glove box on my gto, cuz i did't want to cut the dash and cuz with a ragtop it stayed a lot cleaner and drier behind the door. you wouldn't believe how much dust gets in my fair weather only friend. i hate operating it though, just listen to whatever comes on or plays next. ------------------ keep fly'in lo 66 gto ragtop 389/400 72 blazer (wuza4by) 68 swb fleet 350/700 98 tahoe 2dr (daily ride) __________________ -02 avalanche (daily driver) -66 gto ragtop 389/400 (garage queen, hand-me-down from dad) -72 Tribute Trans Am (6.0LS/T56 6-speed) in progress -2003 YUKON (Wife's) -71 gmc swb fleet (current project, gonna shave everything, bags, stuff w/ 20's, gen III powertrain) -48 3100 SWB - 12/31/23 LONG TERM Project

04-08-2002, 09:04 AM	#28
imaindianoutlaw GMC SHORT FLEET F/S Join Date: Jun 2000 Location: SOUTH WILLIAMSPORT PENNSYLVANNIA Posts: 2,117	Who needs a freakin stereo when you have the great sound of a v8? ------------------ Charles W. Hein S. Williamsport PA imaindianoutlaw@yahoo.com REFRIGERATION TECH 1971 Rolling chassis FOR SALE 1963 Pontiac Tempest 1965 Pontiac GTO 1956 Pontiac 2 dr __________________ CHARLES WADE HEIN HVACR FOREMAN. LEWISBURG U.S.P.

04-08-2002, 09:41 AM	#29
Burlinator Just Another Crazy Canuck Join Date: Dec 2000 Location: Richmond,British Columbia Canada Posts: 1,228	why regret it fixing would be no different than any other body work sure be a helluva lot easier then doing rockers or cab corners mine was cut when I got it so I just slapped a new deck in and a changer under the seat I would only change back if I got one of those decks with the chevy bowtie on the doorflap hehehe ------------------ My CANADA includes BEAVER!!!!!!! [img]http://communities.msn.com/_Secure/0NwAzABASh!uohRSfISjhQyAQFlBNewhOUaHR6bvu3evbZdsgR9IvkX4X4GCQKhKzIWBO9*DLq1ZpIJppCQ/Chevy_anim(1).gif[/img] 71 Custom/10 lb fleet .040 over 350/ burlinator2000@hotmail.com Richmond,B.C. [This message has been edited by Burlinator (edited April 08, 2002).] __________________ 1985 454/465/205, 38.5x11-16BOGGERS soon to be installed: 14bDETROIT,Edelbrock Performer cam,intake and valve springs,Comp roller tips,MSD HEI

04-08-2002, 03:29 PM	#30
Duffy Registered User Join Date: Jan 2001 Location: Billings, MT Posts: 121	I'm with Desert Rat - mouned under the dash. You can buy a plastic enclosure from Crutchfield that mounts really nice below and to the right of the steering column. Works well, out of site and surprisingly is not in the way, although you would think it was by looking at it. Very good alternative. Don't cut it! Duffy ------------------ 71 K-10 Short/Wide __________________ '72 GMC Sierra Grande Custom Camper

04-09-2009, 11:50 PM	#33
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Those who cut dash for a CD player, I have questions. Someone didn't get enough attention as a child.

04-08-2002, 04:04 AM	#26
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	I got a plastic underdash mount for no knob stereos,i bought it at one of the big stores WalMart Kmart or something,its black mounts under the dash think it was like $10-its a nice frame for a deck you could mount anywhere on your roof,under your dash,seat,console-but id make it easy to reack under the seat or in glovebox sounds like a real pain in the arsehole.I got a nice Kenwood tape deck that fits the truck nice,i just thought about addaing a CD changer in my console box,then some amps under the seat,couple 10's behind the seat some mids and tweets,a trunk could sound pretty good easily its a small space,but probably need to lose the gas tank for big speakers,heck make it humb how about a couple 18's in the back!!!!

04-08-2002, 04:09 PM	#31
guyryan100 Registered User Join Date: Sep 2001 Location: Cumming, GA Posts: 484	Imagine if the original owner had cut a big hole to install his 4-track player. I bet you'd really wish THAT hole wasn't there. I'd really consider getting a reproduction original that can play CD's. Then you aren't cutting holes, have a good looking factory-style radio, and can still plan CD's. Probably costs a small fortune, but a wise investment in my book.

04-10-2009, 12:09 AM	#34
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 20,035	Re: Those who cut dash for a CD player, I have questions. Thread from 2002??? Whats with digging out all the old threads lately? And how the heck do you access them in the first place? __________________ … … … … … … … … ... … … … … … … … … … … …

04-10-2009, 12:14 AM	#35
berencam Registered User Join Date: Aug 2007 Location: branson mo Posts: 933	Re: Those who cut dash for a CD player, I have questions. So whats with resurecting 7 year old threads? Instead of setting your forum options to only show threads in the last year do you have it to only show 7 year old thread? __________________ 69 chevy c10 350 3 speed manual wood bed build thread here r.i.p. 70 c10 auto 350 build here

04-10-2009, 12:20 AM	#36
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 20,035	Re: Those who cut dash for a CD player, I have questions. Hmmm, I just found where you can do it. This is odd because I didnt think you used to be able to go back that far...kinda cool. __________________ … … … … … … … … ... … … … … … … … … … … …

04-10-2009, 12:21 AM	#37
67CHIP72 STOLEN Join Date: Jun 2006 Location: Orange County Posts: 1,022	Re: Those who cut dash for a CD player, I have questions. Seems like you could mount one with a custom bracket using the existing holes below the dash. The spot where some mount a CB Radio. You might even make it a quick realease(unplug) to stash it under the seat when parked. __________________ In Search Of

04-10-2009, 12:28 AM	#38
67CHIP72 STOLEN Join Date: Jun 2006 Location: Orange County Posts: 1,022	Re: Those who cut dash for a CD player, I have questions. Good Gravy, I didn't even bother to look at original post date. Guess that dash is probably already cut. __________________ In Search Of

04-10-2009, 05:33 AM	#40
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Re: Those who cut dash for a CD player, I have questions. I cut mine since this thread was started. Glad I did.

04-10-2009, 08:28 AM	#41
*Liz* Catchy title goes here.. Join Date: Mar 2002 Location: Rockwell, NC Posts: 39,767	Re: Those who cut dash for a CD player, I have questions. It would be much easier to start a new post on the subject. Folks come and go, and tastes change. Old threads are great ref tools, but bringing them to the top over and over usually will not get you as much information as just asking a new question.

04-10-2009, 09:02 AM	#42
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Those who cut dash for a CD player, I have questions. I have a 71 and yes I cut the dah. What is the big deal? You have modified the engine,wheels,tires,transmission everything under the sun has been modified one way or another. Cut it and enjoy. Just my 2 cents worth. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.



Register or Log In To remove these advertisements.

04-10-2009, 09:11 AM	#43
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Those who cut dash for a CD player, I have questions. As Andy stated I am one of those that has done alot of changes to my bucket and cutting the dash was not a big deal for me.... Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

04-10-2009, 10:01 AM	#44
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Those who cut dash for a CD player, I have questions. mine was alrady cut otherwise i wouldnt have cut it...o well gotta nice cd player in there now... __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

04-10-2009, 10:46 AM	#46
kelsfine69 18 Till I Die Join Date: Mar 2005 Location: Alberta, Canada Posts: 1,522	Re: Those who cut dash for a CD player, I have questions. Good for you...I put mine in the glovebox and It works well. Theres an old thread on here somewhere how I did it. Not as old as this thread Tho __________________ 2011 GMC Acadia 1969 GMC BBC LS7 2007 GMC Crew Duramax 1987 Camaro Iroc 350 Tuned Port Injection 42000Km 1987 Chevrolet Silverado 350 TBI 1987 Chevrolet Silverado 350 TBI(yes 2) Take me drunk, I'm too home...

04-10-2009, 10:51 AM	#47
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Those who cut dash for a CD player, I have questions. Man, you tend to forget about some of the old guys on here. I haven't heard the name Desert Rat in 4-5 years. Long live this site and the people who share the addiction. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

04-10-2009, 03:42 PM	#49
Beatcoaster 69 Fleetside Join Date: Mar 2009 Location: Lake Stevens, WA Posts: 333	Re: Those who cut dash for a CD player, I have questions. A thread back from the dead! The previous owner of mine cut the dash(did a good job too) and cut a spot for 6x9's in the doors - so at this point why not take it to the next level! I have some speakers from my old subaru and am using them. Polk db components in the dash with both 5-1/4's next to each other free air under the stock grill and am flush mounting the tweeters just behind the dash pad so they reflect up off the windshield. I have some Polk mmc690's for the doors and am planning on running (4) 6-1/2" Tang Band subwoofers in some boxes I will make under the bench seat if there isn't enough low end...I am undecided on the headunit and amps at this point but it will sound great regardless!

Register or Log In To remove these advertisements.