Good byes - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

A few 72's · 01-29-2005, 07:21 PM

Quote:

Originally Posted by nu2-72

Scared me there. I thought you were gone.
The scrap can go to China and come back as a toy. Would not be the same if you went to China and came back as a toy. Maybe Deb would disagree.

She was helping pull parts a few of the day's I was there this week, so she might. Was planning another trip this weekend but looks like it will be monday due to the rain / ice. Crusher had not showed up as of Thus. night, but the big fork lift was there so wont be long.
If you noticed the blue one ton was the one I sent you pic's of the top.

shortymac83 · 01-29-2005, 07:42 PM

Maybe I'm sick, but I can see myself driving this with a 502, 4 speed manual, single-tire 10" meats on the rear and 8" wides up front, on chrome 22" 5 spokes. Make it black, chop the top oh...5" or so, deck the interior out with neon going along the sides above the side windows, two black leather couches (one on either side), a wet bar in the back by the rear door (which will have a flip down ladder), and a leather captain's chair out of an RV. Chrome the entire front end and drop it in the weeds on airbags. mmmm...busses....

454_72_4X4 · 01-29-2005, 07:59 PM

Quote:

Originally Posted by A few 72's

Old step van

Litdave
about 50 miles north of B-ham or 50 south of Huntsville

Some where close to Decater then? I worked there a few years back on the grain elevators right next to the river, (Tenn. River? )

To bad to see it all go to the crusher. I'm sure there's parts there we could all use.

nu2-72 · 01-29-2005, 10:26 PM

I think I have decided to go with the teardrop style. Not correct but I want roof markers and they will fit the existing contour.
I am planning to be down there again the first of June. I will let you know.

Robert1970C20rstbukt · 01-30-2005, 05:22 PM

It sucks to see all those 3/4 and 1 tons that are trashed. I'm always looking for chassis and suspension parts for mine and all I ever find are 1/2 ton trucks that have been picked over.

68w/sbc406 · 01-30-2005, 05:29 PM

RIP

A few 72's · 01-30-2005, 11:48 PM

454 72,
I'm just out side of Cullman, but Decatur is not to far away.

nu2-72,
Just let me know, And if you get some extra time and want to try again to make some yard trips, give me a little notice and I'll take a day off.

GenIIIShorty · 01-31-2005, 01:09 AM

are they sending that '54 ford to the crusher?!?!?!?! yes, it's a ford, but that is the most beautiful ford truck body style ever!

jeffnstef · 02-01-2005, 05:03 PM

Quote:

Originally Posted by shortymac83

Maybe I'm sick, but I can see myself driving this with a 502, 4 speed manual, single-tire 10" meats on the rear and 8" wides up front, on chrome 22" 5 spokes. Make it black, chop the top oh...5" or so, deck the interior out with neon going along the sides above the side windows, two black leather couches (one on either side), a wet bar in the back by the rear door (which will have a flip down ladder), and a leather captain's chair out of an RV. Chrome the entire front end and drop it in the weeds on airbags. mmmm...busses....

68w/sbc406 · 02-01-2005, 08:46 PM

get out your plasma cutter and welder, cause you are going to be busy for a while

TRUCKGUY · 02-01-2005, 09:16 PM

i would like to have the front clip off of that early 60's chevy. it is the same as a 65 isnt it?

A few 72's · 02-02-2005, 05:00 PM

Truckguy, not to sure on early 60's Chevy, the blue one may be gone, the 1.5 or 2 ton had a tank on the back and may still be around for a while.

Robert, green Apache 1.5 ton truck is gone... Don't look to close it may make you cry.

Junk yard tip: Look even if every thing says, not what you need.
Emblems are 73 up
Grill 67/68

Found: 72 only BB Motor mounts
Two bars mounted to the cross member and then went up to the front of the frame.
Included shot after parts were removed not sure why I did not take one of them installed??

Robert1970C20rstbukt · 02-02-2005, 05:32 PM

Well that sucks.

That hood emblem looked like it was in awesome shape. The Apache trucks are my second favorite design next to the 67-72 style trucks.

67ChevyRedneck · 02-02-2005, 06:08 PM

poor trucks........

TRUCKGUY · 02-02-2005, 06:34 PM

do they have a "good" steering column with out the column sift on it. if so how much would you charge to grab it if cheap enough? or trade for a automatic colum? or does some one else have one already that they want to sell?

my email......danschevyinky@yahoo.com.....????

A few 72's · 02-02-2005, 11:05 PM

Truckguy, I only seen two. One was in the step van that the mounts came from and it was in fair to poor shape(IMO). The other was in the 70 one ton and it was not worth the time even if it was free. I'll look at the one in the stepvan, if it is still there and take a few pics.

A few 72's · 02-17-2005, 11:25 AM

truckguy
The column in the step van was starting to pit from the rust on the top and the bottom bearing had fell out. More than I would want to mess with. Did not check a price figured he would ask 20-30?

Luv2xclr8
Took these from the floor board under the drivers seat of the red C60 in post #20. These are the same as the ones in my blazer. If you want the set, let me know. I would trade them for a burger at one of your board meets.

Bob Moore · 02-17-2005, 03:16 PM

Are you selling the 72 mounts? If so, how much to 98407?

Thanks - Bob

LUV2XCLR8 · 02-17-2005, 06:54 PM

Quote:

Originally Posted by A few 72's

Luv2xclr8
Took these from the floor board under the drivers seat of the red C60 in post #20. These are the same as the ones in my blazer. If you want the set, let me know. I would trade them for a burger at one of your board meets.

YUP, THEY LOOK REALLY GOOD, SHOULD CLEAN UP NICE, IT'S A DEAL

TRUCKGUY · 02-17-2005, 11:09 PM

i have done found one and about to pay for it but thanks anyways.

A few 72's · 02-18-2005, 04:22 PM

Bob, Not at this time. Still not sure what I'm going to put in my panel.

Craig, You want me to mail them or bring them to the SSC in April?

LUV2XCLR8 · 02-18-2005, 04:32 PM

Quote:

Originally Posted by A few 72's

Craig, You want me to mail them or bring them to the SSC in April?

EITHER, NOT IN A HURRY FOR THEM, I STILL HAVE TO FIND THE TIRE
IRON THAT FITS MY LUGS AND THE JACK / SPRING FOR THE REAR.

01-29-2005, 07:42 PM	#27
shortymac83 hmm... Join Date: Jan 2004 Location: Culver, Indiana Posts: 1,631	Maybe I'm sick, but I can see myself driving this with a 502, 4 speed manual, single-tire 10" meats on the rear and 8" wides up front, on chrome 22" 5 spokes. Make it black, chop the top oh...5" or so, deck the interior out with neon going along the sides above the side windows, two black leather couches (one on either side), a wet bar in the back by the rear door (which will have a flip down ladder), and a leather captain's chair out of an RV. Chrome the entire front end and drop it in the weeds on airbags. mmmm...busses.... __________________ 1983 Oldsmobile Delta 88 1967 Chevy C-10 stripper www.fcrperformance.com - wanna go...faster? talk to FCR.

01-29-2005, 10:26 PM	#29
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	I think I have decided to go with the teardrop style. Not correct but I want roof markers and they will fit the existing contour. I am planning to be down there again the first of June. I will let you know. __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

01-30-2005, 05:22 PM	#30
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	It sucks to see all those 3/4 and 1 tons that are trashed. I'm always looking for chassis and suspension parts for mine and all I ever find are 1/2 ton trucks that have been picked over. __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck

01-30-2005, 05:29 PM	#31
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	RIP __________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler

01-30-2005, 11:48 PM	#32
A few 72's Registered User Join Date: Mar 2004 Location: Alabama Posts: 705	454 72, I'm just out side of Cullman, but Decatur is not to far away. nu2-72, Just let me know, And if you get some extra time and want to try again to make some yard trips, give me a little notice and I'll take a day off. __________________ 1972 C10 SWB 350 / T400 1972 SWB GMC 350/T350 1972 Cheyenne 20 super "long horn". 402BB / T400 1972 Suburban C10 Deluxe 350 / T350 and a few more.. http://www.myspace.com/afew72s

01-31-2005, 01:09 AM	#33
GenIIIShorty JUNK COLLECTOR!!!!! Join Date: Jan 2005 Location: Spokane, WA Posts: 514	are they sending that '54 ford to the crusher?!?!?!?! yes, it's a ford, but that is the most beautiful ford truck body style ever! __________________ baby The dark side! 2000 XLT PSD F-250 4x4! Offroad package 1970 C10 Short-step soon to be short fleet, maybe? Corvette in truck's clothing in work! Corvette IFS, IRS, TPI and Doug Nash 4+3

02-01-2005, 08:46 PM	#35
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	get out your plasma cutter and welder, cause you are going to be busy for a while __________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler

02-01-2005, 09:16 PM	#36
TRUCKGUY Registered User Join Date: Jan 2005 Location: Nortonville, Ky Posts: 407	i would like to have the front clip off of that early 60's chevy. it is the same as a 65 isnt it?

02-02-2005, 05:00 PM	#37
A few 72's Registered User Join Date: Mar 2004 Location: Alabama Posts: 705	Truckguy, not to sure on early 60's Chevy, the blue one may be gone, the 1.5 or 2 ton had a tank on the back and may still be around for a while. Robert, green Apache 1.5 ton truck is gone... Don't look to close it may make you cry. Junk yard tip: Look even if every thing says, not what you need. Emblems are 73 up Grill 67/68 Found: 72 only BB Motor mounts Two bars mounted to the cross member and then went up to the front of the frame. Included shot after parts were removed not sure why I did not take one of them installed?? Attached Images __________________ 1972 C10 SWB 350 / T400 1972 SWB GMC 350/T350 1972 Cheyenne 20 super "long horn". 402BB / T400 1972 Suburban C10 Deluxe 350 / T350 and a few more.. http://www.myspace.com/afew72s Last edited by A few 72's; 02-02-2005 at 05:28 PM. Reason: typo

02-02-2005, 05:32 PM	#38
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	Well that sucks. That hood emblem looked like it was in awesome shape. The Apache trucks are my second favorite design next to the 67-72 style trucks. __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck

02-02-2005, 06:08 PM	#39
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	poor trucks........ __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

02-02-2005, 06:34 PM	#40
TRUCKGUY Registered User Join Date: Jan 2005 Location: Nortonville, Ky Posts: 407	do they have a "good" steering column with out the column sift on it. if so how much would you charge to grab it if cheap enough? or trade for a automatic colum? or does some one else have one already that they want to sell? my email......danschevyinky@yahoo.com.....????

02-02-2005, 11:05 PM	#41
A few 72's Registered User Join Date: Mar 2004 Location: Alabama Posts: 705	Truckguy, I only seen two. One was in the step van that the mounts came from and it was in fair to poor shape(IMO). The other was in the 70 one ton and it was not worth the time even if it was free. I'll look at the one in the stepvan, if it is still there and take a few pics. __________________ 1972 C10 SWB 350 / T400 1972 SWB GMC 350/T350 1972 Cheyenne 20 super "long horn". 402BB / T400 1972 Suburban C10 Deluxe 350 / T350 and a few more.. http://www.myspace.com/afew72s

02-17-2005, 11:25 AM	#42
A few 72's Registered User Join Date: Mar 2004 Location: Alabama Posts: 705	truckguy The column in the step van was starting to pit from the rust on the top and the bottom bearing had fell out. More than I would want to mess with. Did not check a price figured he would ask 20-30? Luv2xclr8 Took these from the floor board under the drivers seat of the red C60 in post #20. These are the same as the ones in my blazer. If you want the set, let me know. I would trade them for a burger at one of your board meets. Attached Images __________________ 1972 C10 SWB 350 / T400 1972 SWB GMC 350/T350 1972 Cheyenne 20 super "long horn". 402BB / T400 1972 Suburban C10 Deluxe 350 / T350 and a few more.. http://www.myspace.com/afew72s

02-17-2005, 03:16 PM	#43
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	72 big block mounts Are you selling the 72 mounts? If so, how much to 98407? Thanks - Bob __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow



Register or Log In To remove these advertisements.

02-17-2005, 11:09 PM	#45
TRUCKGUY Registered User Join Date: Jan 2005 Location: Nortonville, Ky Posts: 407	i have done found one and about to pay for it but thanks anyways. __________________ Dan. 55 F100 panel truck project 64 350/th400/10bolt short fleet 66 F100 302/C6/9" short fleet 67 IH 4x2 304/t984speed D44 373 locker lwb box 67 IH 4x4 304/t98 4speed/d44/d60 4.10'slwb box 67 IH Travelall 4x4 304/t98 4speed/12bolt/10bolt 81 2wd short fleet current build! 83 350/700r4 short fleet 88 k5 12" lift 3/4 ton swap mud toy 96 Dodge 3500 CUMMINS/5speed/4x2 97 Pontiac Trans Am WS6/LT1 383/6speed/T-tops

02-18-2005, 04:22 PM	#46
A few 72's Registered User Join Date: Mar 2004 Location: Alabama Posts: 705	Bob, Not at this time. Still not sure what I'm going to put in my panel. Craig, You want me to mail them or bring them to the SSC in April? __________________ 1972 C10 SWB 350 / T400 1972 SWB GMC 350/T350 1972 Cheyenne 20 super "long horn". 402BB / T400 1972 Suburban C10 Deluxe 350 / T350 and a few more.. http://www.myspace.com/afew72s

Register or Log In To remove these advertisements.