PARTING a 72 Jimmy 6 cyl, PS, single wall top and alot of good parts - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**lolife99** · 03-08-2005, 11:33 PM

I will also pass on the top. Thanks, lolife99.

teeitup · 03-08-2005, 11:44 PM

AIR cleaner, steering column is SOLD To TXFirefighter pending shipping costs!!!!!!!!
C-1072, I don't know how'd I'd ship and ideas?
Ricks, blazer frames are 11 inches shorter than swb frames, its a disc brake set up though, frame has ALOT of surface rust, it came from New York originally, not sure on ratio haven't got that far yet.
Bryan, sorry he got it
Dave, thats the worst part on the bed floor sorry
Tnblazer (Rob), I'll check the filler out more tomorrow night, $40 is for the tailgate piece only, I'm needing the other pieces for mine sorry.
Shawn, You can check it more when you get here, I'll have more stuff off it by then. Its one of cleanest ones I've seen.
Lolife99, thanks for letting me know.
Scott, A special "Thanks to you", I got some pieces I wanted off it so now I'm trying to get back some of what I paid for it.

I'm sure I'll take some of the parts to the swap meet in a couple months.
Thanks Randy

**tnblazerk5** · 03-08-2005, 11:50 PM

ok let me know sumthing after you look at the stuff please

**too much stuff** · 03-08-2005, 11:56 PM

Randy, let me know on the am/fm if it falls through. I will send you pm in a day or two on non-jimmy parts. Eric

mr402 · 03-09-2005, 12:02 AM

Looked at the check book and will have to back off getting the AM-FM (and a few other things per the wife).

teeitup · 03-09-2005, 10:59 PM

Tnblaz, here is a pic of stuff, the cover has some rust on bottom. $21 shipping for all in pic. Thanks let me know Randy

nyncompute · 03-09-2005, 11:15 PM

In line for the radio..thanks

**tnblazerk5** · 03-09-2005, 11:21 PM

is the inside of the fill tube clean ? and i will have to pass on the tail gate strip but still am interested in the fill tube and that stuff

teeitup · 03-10-2005, 12:05 AM

NYNC, I got one guy in front of you, I'll let you know Thursday night
Tnblazer, its clean. $8 shipping.
Thanks Randy

teeitup · 03-10-2005, 12:28 AM

Bucket seats and spare tire holder are still for sale, shipping killed the deal.

**tnblazerk5** · 03-10-2005, 12:58 AM

you got a pm

meathead95 · 03-10-2005, 03:16 PM

put me in line for the am/fm

teeitup · 03-11-2005, 06:13 PM

Guys I'm waiting on one guy ahead of NYNC and Meathead for the radio, I'll find out something tonight.
POWER STEERING setup is sold!!!!!!!!
Thanks Randy

c-1072 · 03-11-2005, 07:06 PM

I would like the windshield frame if you will cut it complete off the truck . i would like it so i could drill out the spot welds at the base of the windshield and remove the junk metal and install it on mine . A tourch would work wonders . you could ship it on a greyhound bus or probably dhl . Give me a price if you are interested . Thanks
Todd
Ps i am also interested in the tailgate strip if no takers .

**too much stuff** · 03-11-2005, 07:52 PM

Guys, i am passing on the radio. Next in line i guess. Thanks for trying randy!!! TTT for ya. Eric

teeitup · 03-11-2005, 07:56 PM

C-1072, I have a guy locally that may want it, I really don't want to cut it and ship right now. I also think I have the 2 tailgates strips sold to a board member, I'll know Mon for sure on them.

NYNC, your in line for the AM-FM, I'll get a better pic of it Sat morn, it has some light pitting on face. Please let me know ASAP so I can let Meathead know.

Thanks Randy

teeitup · 03-11-2005, 10:58 PM

NYNC pic for you, some light pitting on face, some pitting on chrome knobs. I'll pm you, Thanks Randy

68Shorty4x · 03-13-2005, 05:40 PM

How much for the engine crossmember with the engine mounts?

Mint68 · 03-13-2005, 11:31 PM

Still got the spare tire holder? Could you post a pic? What would it cost to get it to 68502?

teeitup · 03-14-2005, 12:07 AM

68shorty, it will be awhile before I get it torn down that far
Mint68, there is a pic of it on page one sitting on the bed floor, I'll get a shipping price tomorrow.
Thanks Randy

teeitup · 03-14-2005, 09:06 PM

Mint, $10 shipping. It is fine, for some reason I can't get pic to open on board. Thanks let me know
To everyone, I've revamped some of the prices on parts, please look at the first part of this thread for pricing. Thanks Randy

**tnblazerk5** · 03-14-2005, 09:41 PM

hey i just looked at the pics what shape are the shifterboots (trans and xfer case )in and the rings that hold them down ?

teeitup · 03-14-2005, 10:07 PM

Robb, I think the boots were good, the 4 speed ring was fine but I think the transfer ring wasn't the best. $20 and I can ship with our other stuff. Let me look at them tomorrow night again if interested. Thanks Randy

**tnblazerk5** · 03-14-2005, 10:10 PM

take a look at them and let me know sumthing please

teeitup · 03-15-2005, 09:17 PM

boot pics for you Robb

03-08-2005, 11:33 PM	#26
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,691	I will also pass on the top. Thanks, lolife99. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

03-08-2005, 11:44 PM	#27
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	AIR cleaner, steering column is SOLD To TXFirefighter pending shipping costs!!!!!!!! C-1072, I don't know how'd I'd ship and ideas? Ricks, blazer frames are 11 inches shorter than swb frames, its a disc brake set up though, frame has ALOT of surface rust, it came from New York originally, not sure on ratio haven't got that far yet. Bryan, sorry he got it Dave, thats the worst part on the bed floor sorry Tnblazer (Rob), I'll check the filler out more tomorrow night, $40 is for the tailgate piece only, I'm needing the other pieces for mine sorry. Shawn, You can check it more when you get here, I'll have more stuff off it by then. Its one of cleanest ones I've seen. Lolife99, thanks for letting me know. Scott, A special "Thanks to you", I got some pieces I wanted off it so now I'm trying to get back some of what I paid for it. I'm sure I'll take some of the parts to the swap meet in a couple months. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 03-10-2005 at 12:27 AM.

03-08-2005, 11:56 PM	#29
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,713	Randy, let me know on the am/fm if it falls through. I will send you pm in a day or two on non-jimmy parts. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-09-2005, 10:59 PM	#31
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Tnblaz, here is a pic of stuff, the cover has some rust on bottom. $21 shipping for all in pic. Thanks let me know Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-10-2005, 12:05 AM	#34
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	NYNC, I got one guy in front of you, I'll let you know Thursday night Tnblazer, its clean. $8 shipping. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-08-2005, 11:50 PM	#28
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	ok let me know sumthing after you look at the stuff please

03-09-2005, 12:02 AM	#30
mr402 Registered User Join Date: Jan 2004 Location: Elmira, Oregon Posts: 449	Looked at the check book and will have to back off getting the AM-FM (and a few other things per the wife).

03-09-2005, 11:15 PM	#32
nyncompute Registered User Join Date: Nov 2004 Location: Southern Nevada Posts: 532	In line for the radio..thanks

03-09-2005, 11:21 PM	#33
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	is the inside of the fill tube clean ? and i will have to pass on the tail gate strip but still am interested in the fill tube and that stuff

03-10-2005, 12:28 AM	#35
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Bucket seats and spare tire holder are still for sale, shipping killed the deal. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-10-2005, 12:58 AM	#36
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	you got a pm

03-10-2005, 03:16 PM	#37
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	put me in line for the am/fm __________________ 72 2wd blazer 72 swb 4x4

03-11-2005, 06:13 PM	#38
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Guys I'm waiting on one guy ahead of NYNC and Meathead for the radio, I'll find out something tonight. POWER STEERING setup is sold!!!!!!!! Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-11-2005, 07:06 PM	#39
c-1072 Registered User Join Date: Sep 2004 Location: rochester NY Posts: 777	windshield frame I would like the windshield frame if you will cut it complete off the truck . i would like it so i could drill out the spot welds at the base of the windshield and remove the junk metal and install it on mine . A tourch would work wonders . you could ship it on a greyhound bus or probably dhl . Give me a price if you are interested . Thanks Todd Ps i am also interested in the tailgate strip if no takers .

03-11-2005, 07:52 PM	#40
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,713	Guys, i am passing on the radio. Next in line i guess. Thanks for trying randy!!! TTT for ya. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto



Register or Log In To remove these advertisements.

03-11-2005, 07:56 PM	#41
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	C-1072, I have a guy locally that may want it, I really don't want to cut it and ship right now. I also think I have the 2 tailgates strips sold to a board member, I'll know Mon for sure on them. NYNC, your in line for the AM-FM, I'll get a better pic of it Sat morn, it has some light pitting on face. Please let me know ASAP so I can let Meathead know. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-11-2005, 10:58 PM	#42
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	NYNC pic for you, some light pitting on face, some pitting on chrome knobs. I'll pm you, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-13-2005, 05:40 PM	#43
68Shorty4x Registered User Join Date: Nov 2004 Posts: 9	How much for the engine crossmember with the engine mounts?

03-13-2005, 11:31 PM	#44
Mint68 Registered User Join Date: Nov 2004 Location: Nebraska Posts: 762	Still got the spare tire holder? Could you post a pic? What would it cost to get it to 68502?

03-14-2005, 12:07 AM	#45
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	68shorty, it will be awhile before I get it torn down that far Mint68, there is a pic of it on page one sitting on the bed floor, I'll get a shipping price tomorrow. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-14-2005, 09:06 PM	#46
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Mint, $10 shipping. It is fine, for some reason I can't get pic to open on board. Thanks let me know To everyone, I've revamped some of the prices on parts, please look at the first part of this thread for pricing. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-14-2005, 09:41 PM	#47
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	hey i just looked at the pics what shape are the shifterboots (trans and xfer case )in and the rings that hold them down ?

03-14-2005, 10:07 PM	#48
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Robb, I think the boots were good, the 4 speed ring was fine but I think the transfer ring wasn't the best. $20 and I can ship with our other stuff. Let me look at them tomorrow night again if interested. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-14-2005, 10:10 PM	#49
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	take a look at them and let me know sumthing please

03-15-2005, 09:17 PM	#50
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	boot pics for you Robb __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.