What did you get done? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TexasJeff · 05-16-2005, 08:40 AM

I know Roger and Connie from Outback Truck parts, they are great people and are really fair with all thier prices. Bought alot of my parts from them, but then again I am still not finished.

454HO · 05-16-2005, 08:54 AM

Friday I ordered about $1000 worth of stuff from Summit. A new set of drop spindles, rear shackles, rear sway bar, poly cab bushings, 140 amp alternator, 3" x-pipe and a Holley rebuild kit. That should keep me busy for a while.

Took my sons to Lake Conroe Saturday and did a bit of skiing. The water is still a bit on the cool side, but we had a good time. My oldest son is finally old enough to drive the boat while I ski.

Sunday, I stripped the upper control arms I bought last weekend. I am getting good at removing control arm bushings. I was hoping to get my lower A arms done, but none of the parts stores around me had a ball joint press available.

80BIG10 · 05-16-2005, 09:50 AM

New shocks, new rotors, brake pads, alignment, replaced a couple of warn suspension parts, rotated tires.

Found a slight fuel leak from one of the lines (just old age) that will get fixed tonight.

mingoman · 05-16-2005, 10:16 AM

Put wire cages around my tomatoes. Took the front cap off my donor Chevelle then pulled the frame out from under it. Left the body in my garage { my wife won't let me leave it in the yard. } and put the frame in my shop so I can start tearing it apart.

75stepside · 05-16-2005, 10:18 AM

finally updated my webpage!

got the truck paint fully buffed/wetsanded... installed complete front end, emblems, lights, etc... really made things come alive...

from this:

to this!

more details here:

http://merlin2.alleg.edu/student/t/t...rogress19.html

BTW, can't wait to get rid of the 4x4 look! (and those 40 series 18" tires!)

screwballl · 05-16-2005, 11:20 AM

so far all i got done was replace the bathroom fan yesterday... damn that attic gets hot
today im just going to get haircut, chiropractor adjustment and change the oil in my burb

modmach1 · 05-16-2005, 12:23 PM

Hi Again Boys

This weekend i finished up my girlfriends 88 GMC Sierra and on saturday we took it to its first show..and guess what...First Price

And on Sunday my little brother got christening...(i think you call it that )
He is 3.5 months and already owns a 70 Mustang Mach-1

screwballl · 05-16-2005, 12:58 PM

modmach, didnt know your significant other was on the boards also...
http://67-72chevytrucks.com/vboard/s...23#post1261023

modmach1 · 05-16-2005, 01:03 PM

Quote:

Originally Posted by screwballl

modmach, didnt know your significant other was on the boards also...
http://67-72chevytrucks.com/vboard/s...23#post1261023

Yes there she is

Prerunner1982 · 05-16-2005, 04:26 PM

5-8.. didnt happen to see a bunch of military trucks there did ya? My unit left Sat for thier 2 week summer camp.. We exit I-40 at the turner falls exit, and head north to Gore (Camp Gruber).

This weekend.. I... got the paperwork started for our new house... and went price shopping for stuff to go in it... and i bought a new craftsman chainsaw to clear the land for the house..

freightdriver · 05-17-2005, 02:47 PM

well i did'nt do anything on my truck since its in cali and im in wyoming but my dad and his buddy rebuilt my frontend redid the brakes and fixed my hubs that have been scewed up since i bought it. got ceramic brake pads finally

no more polishing my rims once a week because of brake dust they also fixed my steering column. i've got to give it to my dad and his friend they've been working they're asses off on my truck just to get it ready so i can drive it out here in june...

bodydropped · 05-17-2005, 03:08 PM

i wish i went to greenville and meltdown at the same time

05-16-2005, 08:40 AM	#26
TexasJeff Don't Crush em Restore em Join Date: Aug 2004 Location: Pinehurst, Texas Posts: 764	N2trux I know Roger and Connie from Outback Truck parts, they are great people and are really fair with all thier prices. Bought alot of my parts from them, but then again I am still not finished. __________________ TexasJeff 2009 Silver with Linen Interior Cadillac DTS 1990 Red with White Top and Interior Ford Mustang GT convertible 1998 Red with Gray Interior, C3500 Chevy Crew Cab Dually

05-16-2005, 08:54 AM	#27
454HO Registered User Join Date: Apr 2005 Location: Austin, TX Posts: 1,223	Friday I ordered about $1000 worth of stuff from Summit. A new set of drop spindles, rear shackles, rear sway bar, poly cab bushings, 140 amp alternator, 3" x-pipe and a Holley rebuild kit. That should keep me busy for a while. Took my sons to Lake Conroe Saturday and did a bit of skiing. The water is still a bit on the cool side, but we had a good time. My oldest son is finally old enough to drive the boat while I ski. Sunday, I stripped the upper control arms I bought last weekend. I am getting good at removing control arm bushings. I was hoping to get my lower A arms done, but none of the parts stores around me had a ball joint press available. __________________ - Greg

05-16-2005, 10:16 AM	#29
mingoman Registered User Join Date: May 2004 Location: Miss Co Arkansas Posts: 679	Put wire cages around my tomatoes. Took the front cap off my donor Chevelle then pulled the frame out from under it. Left the body in my garage { my wife won't let me leave it in the yard. } and put the frame in my shop so I can start tearing it apart. __________________ 76/77/78 Cheyenne 1997 K3500 454 soon to be 496

05-16-2005, 10:18 AM	#30
75stepside Proud Member Join Date: Nov 2002 Location: Pittsburgh, PA Posts: 741	finally updated my webpage! got the truck paint fully buffed/wetsanded... installed complete front end, emblems, lights, etc... really made things come alive... from this: to this! more details here: http://merlin2.alleg.edu/student/t/t...rogress19.html BTW, can't wait to get rid of the 4x4 look! (and those 40 series 18" tires!) Last edited by 75stepside; 05-16-2005 at 10:19 AM.

05-16-2005, 11:20 AM	#31
screwballl Tonawanda 454 Join Date: Mar 2004 Location: Liquid Sunshine State Posts: 2,754	so far all i got done was replace the bathroom fan yesterday... damn that attic gets hot today im just going to get haircut, chiropractor adjustment and change the oil in my burb __________________ 91 Chevy Suburban Tonawanda 454 R2500 - SOLD!!! 04 Dodge Durango 5.7L Hemi 2WD, 24K miles (as of July 2011) In the past 30 years about 90% of Fords are still on the road, the other 10% made it home. -------------------

05-16-2005, 09:50 AM	#28
80BIG10 3 lefts make a right Join Date: Jun 2004 Location: Texas Hill Country Posts: 150	New shocks, new rotors, brake pads, alignment, replaced a couple of warn suspension parts, rotated tires. Found a slight fuel leak from one of the lines (just old age) that will get fixed tonight.

05-16-2005, 12:23 PM	#32
modmach1 Registered User Join Date: Sep 2004 Location: Norway Posts: 152	Hi Again Boys This weekend i finished up my girlfriends 88 GMC Sierra and on saturday we took it to its first show..and guess what...First Price And on Sunday my little brother got christening...(i think you call it that ) He is 3.5 months and already owns a 70 Mustang Mach-1 __________________ http://www.moldestuket.com 1971 Mustang Mach-1 429 CJ-R 1973 Mustang Mach-1 289 1975/71 Pontiac Firebird Formula 400 1978 Chevrolet C-10 Fleetside Longbed Scottsdale 1980 Pontiac Phoenix

05-16-2005, 12:58 PM	#33
screwballl Tonawanda 454 Join Date: Mar 2004 Location: Liquid Sunshine State Posts: 2,754	modmach, didnt know your significant other was on the boards also... http://67-72chevytrucks.com/vboard/s...23#post1261023 __________________ 91 Chevy Suburban Tonawanda 454 R2500 - SOLD!!! 04 Dodge Durango 5.7L Hemi 2WD, 24K miles (as of July 2011) In the past 30 years about 90% of Fords are still on the road, the other 10% made it home. -------------------

05-16-2005, 04:26 PM	#35
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	5-8.. didnt happen to see a bunch of military trucks there did ya? My unit left Sat for thier 2 week summer camp.. We exit I-40 at the turner falls exit, and head north to Gore (Camp Gruber). This weekend.. I... got the paperwork started for our new house... and went price shopping for stuff to go in it... and i bought a new craftsman chainsaw to clear the land for the house.. __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call

05-17-2005, 02:47 PM	#36
freightdriver Registered User Join Date: Jan 2004 Location: oakdale,ca Posts: 51	well i did'nt do anything on my truck since its in cali and im in wyoming but my dad and his buddy rebuilt my frontend redid the brakes and fixed my hubs that have been scewed up since i bought it. got ceramic brake pads finally no more polishing my rims once a week because of brake dust they also fixed my steering column. i've got to give it to my dad and his friend they've been working they're asses off on my truck just to get it ready so i can drive it out here in june...

05-17-2005, 03:08 PM	#37
bodydropped Registered User Join Date: Jan 2005 Location: beaumont,tx Posts: 757	i wish i went to greenville and meltdown at the same time __________________ http://img.photobucket.com/albums/v5...ropped/sig.jpg



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.