Looked at a different one tonight!!!!!!! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

qksilver · 03-07-2006, 01:12 PM

Let me know on the 67 stuff, looking for good complete front clip or parts to make one and good SWB leaf spring frames, 4X4 or 2wheel, need 2 both for rusted out 4X4's, I have all the crossmembers, spring shakles etc to convert a 2 wheelto 4 wheel just need leaf spring frames with the straight rear frame rails.
Thanks,
Steve
Pm me I get confused easily and might not check this thread!

teeitup · 03-08-2006, 06:05 AM

Thanks guys, I'm going Monday to try work a deal. I think he's wanting $3500 for the GMC alone. If I get them all bought I'll try to sell the rest and see how it all does before I part the GMC. I'll try to sell it whole first. Thanks Randy

**special-K** · 03-08-2006, 08:37 AM

It`s a diamond in the rough to a select group.But,$3,500?Sheesh

**CPNE** · 03-08-2006, 10:45 AM

Quote:

Originally Posted by special-K

It`s a diamond in the rough to a select group.But,$3,500?Sheesh

I say good for him. It's priced where it'll prevent some "Bozo" from buying it and yanking the 305V6 in favor of a small block. The truck's value is in what it is, not what can be made from it.

No I'm not inferring Teeitup or special_K would do that, but there are more than a few here who would, especially if the price were under 2K. Better to let her sit as a testiment to her old glory, than to become someone's "bling thing".

There are enough trucks made into caricatures.

Did I say that? :rndll:

**truckdude239** · 03-08-2006, 10:48 AM

mannnn what a scoreeeeeeeeeeeeeeee

BobS · 03-08-2006, 02:45 PM

There was a truck just like this one that sold on E-Bay a few weeks ago for $3500. The body was in good shape and I thought it was worth more than that considering what I've seen some trucks sell for. I hope you're able to find someone to give it a good home and not cut it up. What kind of shape is it in?

Bob

teeitup · 03-08-2006, 10:03 PM

If I do get them all bought, I don't want to part it but its the major part of whole deal with all the options it has. If it was a 4x4 I'd keep it and fix it up, I'm not into fixing up 2wd's. As I said I'd prefer to sell it whole if I get it. I need to look at it again Monday, check it out, its been 9 months or longer since I looked at it. Thanks to all for your input, Randy

**special-K** · 03-09-2006, 09:20 AM

I was thinking that price was high considering you were buying him out.A guy should expect to not get full-value in deals like this,as Im sure you well know,room has to be left to make it worth a buyer`s while.You end up buying junk to get the good stuff,too.And,it`s alot of work people overlook.It`s not like you just get dropped off and drive them away.That,and you need a rig to do it or pay a heela bunch of money to have someone do it.I hope the guy makes you a deal you can go with.Good luck.

teeitup · 03-09-2006, 09:47 AM

Your exactly right Special-K, Thats what I'm trying to tell the seller, he has 13 other trucks I have to haul, over half of them, probably more don't have many useable parts on them so they'll be hauled to scrap. This stuff is over an hour from me so your right about that too fuel and time comes into play on the buying part of it too. Another problem is I really am finding it hard to find time to keep doing the truck parting deal with 2 kids now and a grouchey wife too

Thanks Randy

LUV2XCLR8 · 03-09-2006, 04:57 PM

HOLY OLD THREAD BATMAN

JAKES 68GMC · 03-09-2006, 05:05 PM

I wish the area around the shop looked like that.

**special-K** · 03-09-2006, 10:00 PM

Quote:

Originally Posted by LUV2XCLR8

HOLY OLD THREAD BATMAN

It`s new again,Rip Van Winkle.

teeitup · 03-10-2006, 01:24 AM

Going back to try to buy them, between pregancy and buying the new old house, these got put on the back burner.

teeitup · 07-01-2007, 10:44 AM

OLD THREAD, OLD THREAD!!!

Anyway this guys daughter called me yesterday and wants me to get together with her father and the family to try to make a deal on all these again. He's a rich old guy that doesn't need the money, thats what the daughter told me, but the kids want to try to get rid of some of his stuff. Hopefully I can get something to happen with these this month. Just thought I'd bring it to the top for everyone to look at pics!!! NOT A FOR SALE THREAD!!! Just pics of some old trucks I found. Thanks Randy

teeitup · 10-19-2007, 02:11 PM

2 years and 5 months later, I'm going back to meet with this guy and try to work a deal. I'm headed over there Sat afternoon, hopefully he'll be ready to sell. I know the big block is gone but don't know about any of the others. This has been a pain trying to work with this guy on these trucks. If I get them all bought I'll be parting them all except the 67 GMC with the V6 in it. Wish me luck, Thanks Randy

**Bob B.** · 10-19-2007, 06:07 PM

Probably don't need to bring up how rare '67-'68 V-6 A/C compressor brackets and pulleys are, do I?

BLAZERMAN · 10-19-2007, 06:07 PM

Good luck Old Buddy, Old Pall!!!!! I see lots of stuff in there I cant live without!!

67_C-30 · 10-19-2007, 06:14 PM

Keep me in mind if you get any FACTORY Jr. West mirrors!!

tcb-1 · 10-19-2007, 06:34 PM

rear bumper brackets would be a real nice early Christmas present to myself........ and I'm in Shawnee I could even help take them off!!!! keep me in mind.

teeitup · 10-19-2007, 11:13 PM

Bob, I thought about you and this V6!!
Rob, Ole Buddy!!! he he, you know I always work with you!!
67_C-30 and Tcb-1, I'll let you know if I get them bought, it will be on parts board if do
Thanks Randy

teeitup · 10-20-2007, 08:57 PM

Finally got them bought, brought the GMC home tonight!!!!!!

71swb4x4 · 10-20-2007, 09:37 PM

Nice haul Randy. That 67 GMC is a heck of a truck.

tcb-1 · 10-20-2007, 09:41 PM

congrats on the deal of the century!

chipflyer · 10-20-2007, 09:45 PM

Good job Randy! Can't wait to get a look at that 67!

Jeff

xshadow · 10-20-2007, 10:03 PM

Wow............

03-07-2006, 01:12 PM	#26
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: Looked at a different one tonight!!!!!!! Let me know on the 67 stuff, looking for good complete front clip or parts to make one and good SWB leaf spring frames, 4X4 or 2wheel, need 2 both for rusted out 4X4's, I have all the crossmembers, spring shakles etc to convert a 2 wheelto 4 wheel just need leaf spring frames with the straight rear frame rails. Thanks, Steve Pm me I get confused easily and might not check this thread!

03-08-2006, 06:05 AM	#27
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Looked at a different one tonight!!!!!!! Thanks guys, I'm going Monday to try work a deal. I think he's wanting $3500 for the GMC alone. If I get them all bought I'll try to sell the rest and see how it all does before I part the GMC. I'll try to sell it whole first. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-08-2006, 08:37 AM	#28
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Looked at a different one tonight!!!!!!! It`s a diamond in the rough to a select group.But,$3,500?Sheesh __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-08-2006, 10:48 AM	#30
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: Looked at a different one tonight!!!!!!! mannnn what a scoreeeeeeeeeeeeeeee __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

03-08-2006, 02:45 PM	#31
BobS Senior Member Join Date: May 2001 Location: West Central Minnesota Posts: 568	Re: Looked at a different one tonight!!!!!!! There was a truck just like this one that sold on E-Bay a few weeks ago for $3500. The body was in good shape and I thought it was worth more than that considering what I've seen some trucks sell for. I hope you're able to find someone to give it a good home and not cut it up. What kind of shape is it in? Bob __________________ V-6....only GMC Trucks have it! 62 GMC W5000 NAPCO-V6 65 GMC 2500 NAPCO Panel-V6 66 GMC 1000-V6 66 GMC 1500-V6 67 GMC K1500-SBC (originally a KM-V6) 68 GMC C1500-V6 68 GMC C1500-V6 68 GMC Suburban C2500 70 Chevy K20-SBC 71 Chevy C30 Longhorn-SBC 72 GMC Suburban C1500-BBC 72 Chevy C10-SBC 72 GMC C5500-ToroFlow Diesel

03-08-2006, 10:03 PM	#32
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Looked at a different one tonight!!!!!!! If I do get them all bought, I don't want to part it but its the major part of whole deal with all the options it has. If it was a 4x4 I'd keep it and fix it up, I'm not into fixing up 2wd's. As I said I'd prefer to sell it whole if I get it. I need to look at it again Monday, check it out, its been 9 months or longer since I looked at it. Thanks to all for your input, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-09-2006, 09:20 AM	#33
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Looked at a different one tonight!!!!!!! I was thinking that price was high considering you were buying him out.A guy should expect to not get full-value in deals like this,as Im sure you well know,room has to be left to make it worth a buyer`s while.You end up buying junk to get the good stuff,too.And,it`s alot of work people overlook.It`s not like you just get dropped off and drive them away.That,and you need a rig to do it or pay a heela bunch of money to have someone do it.I hope the guy makes you a deal you can go with.Good luck. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-09-2006, 09:47 AM	#34
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Looked at a different one tonight!!!!!!! Your exactly right Special-K, Thats what I'm trying to tell the seller, he has 13 other trucks I have to haul, over half of them, probably more don't have many useable parts on them so they'll be hauled to scrap. This stuff is over an hour from me so your right about that too fuel and time comes into play on the buying part of it too. Another problem is I really am finding it hard to find time to keep doing the truck parting deal with 2 kids now and a grouchey wife too Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-09-2006, 04:57 PM	#35
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Looked at a different one tonight!!!!!!! HOLY OLD THREAD BATMAN __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

03-09-2006, 05:05 PM	#36
JAKES 68GMC Aluminum slot wheels rule... Join Date: Jan 2006 Location: Maine Posts: 6,211	Re: Looked at a different one tonight!!!!!!! I wish the area around the shop looked like that.

03-10-2006, 01:24 AM	#38
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Looked at a different one tonight!!!!!!! Going back to try to buy them, between pregancy and buying the new old house, these got put on the back burner. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-01-2007, 10:44 AM	#39
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Looked at a different one tonight!!!!!!! OLD THREAD, OLD THREAD!!! Anyway this guys daughter called me yesterday and wants me to get together with her father and the family to try to make a deal on all these again. He's a rich old guy that doesn't need the money, thats what the daughter told me, but the kids want to try to get rid of some of his stuff. Hopefully I can get something to happen with these this month. Just thought I'd bring it to the top for everyone to look at pics!!! NOT A FOR SALE THREAD!!! Just pics of some old trucks I found. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-19-2007, 02:11 PM	#40
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Looked at a different one tonight!!!!!!! 2 years and 5 months later, I'm going back to meet with this guy and try to work a deal. I'm headed over there Sat afternoon, hopefully he'll be ready to sell. I know the big block is gone but don't know about any of the others. This has been a pain trying to work with this guy on these trucks. If I get them all bought I'll be parting them all except the 67 GMC with the V6 in it. Wish me luck, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-19-2007, 06:07 PM	#41
Bob B. Senior Member Join Date: Aug 2005 Location: Los Angeles Posts: 1,363	Re: Looked at a different one tonight!!!!!!! Probably don't need to bring up how rare '67-'68 V-6 A/C compressor brackets and pulleys are, do I? __________________ 1967 GMC CM-2500 Camper Cruiser, 351E V-6, NP 435 4 speed, Dana 60, and factory A/C. 2012 GMC K-3500 WT regular cab, 6.0L Vortec, 6L90.

10-19-2007, 06:07 PM	#42
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	Re: Looked at a different one tonight!!!!!!! Good luck Old Buddy, Old Pall!!!!! I see lots of stuff in there I cant live without!! __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C



Register or Log In To remove these advertisements.

10-19-2007, 06:14 PM	#43
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: Looked at a different one tonight!!!!!!! Keep me in mind if you get any FACTORY Jr. West mirrors!! __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

10-19-2007, 06:34 PM	#44
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: Looked at a different one tonight!!!!!!! rear bumper brackets would be a real nice early Christmas present to myself........ and I'm in Shawnee I could even help take them off!!!! keep me in mind.

10-19-2007, 11:13 PM	#45
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Looked at a different one tonight!!!!!!! Bob, I thought about you and this V6!! Rob, Ole Buddy!!! he he, you know I always work with you!! 67_C-30 and Tcb-1, I'll let you know if I get them bought, it will be on parts board if do Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-20-2007, 08:57 PM	#46
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Looked at a different one tonight!!!!!!! Finally got them bought, brought the GMC home tonight!!!!!! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-20-2007, 09:37 PM	#47
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: Looked at a different one tonight!!!!!!! Nice haul Randy. That 67 GMC is a heck of a truck. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

10-20-2007, 09:41 PM	#48
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: Looked at a different one tonight!!!!!!! congrats on the deal of the century!

10-20-2007, 09:45 PM	#49
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: Looked at a different one tonight!!!!!!! Good job Randy! Can't wait to get a look at that 67! Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

10-20-2007, 10:03 PM	#50
xshadow Registered User Join Date: Apr 2006 Location: va Posts: 553	Re: Looked at a different one tonight!!!!!!! Wow............

Register or Log In To remove these advertisements.