parting out the 72 suburban email me with requests - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Sublvr72* · 06-17-2005, 01:54 AM

71-72 chevy factory correct parts. drop spindles are 2.5" I forget the brand but all the company does is make early muscle car disk brake conversions and drop spindles for vintage cars and trucks. no coils, just air bags (also for sale) Bushings were all replaced with the factory correct 71-72 parts.

Quote:

Originally Posted by 53burb

Could you send more info about the frontend?? I assume it is 5-lug. What is the drop on the spindles?? What about the coil springs?? What kind of bushings are used (73-87 or 71-72). Where are the spindles from?? etc, etc.

sixty8c10 · 06-17-2005, 09:21 AM

i'm interested in the airbag setup, do you have front and rear? compressor(s), tank(s), lines, switches, etc. how much shipped to 70659?

Burnsman · 06-17-2005, 10:43 AM

How much for the steering wheel and all adapter parts? And shipping to 16335? Thanks. Brian

*Sublvr72* · 06-17-2005, 11:25 AM

Quote:

Originally Posted by Burnsman

How much for the steering wheel and all adapter parts? And shipping to 16335? Thanks. Brian

steering wheel is gone

*Sublvr72* · 06-17-2005, 11:25 AM

Quote:

Originally Posted by sixty8c10

i'm interested in the airbag setup, do you have front and rear? compressor(s), tank(s), lines, switches, etc. how much shipped to 70659?

I only have brackets for the front, 2 bags, and fittings. $200 shipped

*Sublvr72* · 06-18-2005, 12:41 PM

ttt

c-1072 · 06-18-2005, 12:48 PM

Any interest in selling the steering wheel ?

*Sublvr72* · 06-18-2005, 03:54 PM

steering wheel is already gone...

curley1 · 06-19-2005, 12:28 PM

72:is the motor&trans for sale? I also might be interested in the front suspension stuff.. What's the info on the motor??? stock or modified

thanks

curley

sixty8c10 · 06-19-2005, 01:12 PM

pm'd ya

*Sublvr72* · 06-20-2005, 04:07 AM

Quote:

Originally Posted by curley1

72:is the motor&trans for sale? I also might be interested in the front suspension stuff.. What's the info on the motor??? stock or modified

thanks

curley

yes motor and trans are for sale, $1000 for both. Both have less than 2K miles on them. stock 350 motor with small cam, edelbrock intake, edelbrock 600cfm carb, HEI conversion, Accell 8.8MM wires. Suspension is also for sale too.

*Sublvr72* · 06-20-2005, 04:08 AM

Quote:

Originally Posted by sixty8c10

pm'd ya

replied, I just saw what it is for. Paypal or money order is fine. I will PM you back with the info.

*Sublvr72* · 06-20-2005, 07:36 PM

steering wheel is gone.

*Sublvr72* · 06-20-2005, 07:39 PM

here is a close up pic of one of the wheels, I took it off and polished it to show how clean they are.

Drivers front wheel after polish

*Sublvr72* · 06-21-2005, 12:02 AM

ttt

Nightrider · 06-22-2005, 10:38 AM

seats?

rodstored-72 · 06-22-2005, 11:08 AM

Sublvr72,
if the inner fenders are not rusted or dented i am interested in them, if available. i am in chandler,az. i will be in san diego in a couple of weeks, how far is that to where you are??? if i get them then maybe i can pick them up?? you can pm with more info..

thanks!

rodstored-72

*Sublvr72* · 06-22-2005, 04:58 PM

Seats are for sale (as a package), I will also consider partial trade for a bench seat. I want $1000 for the seat set, two buckets, center console, 60/40 split folding bench with drink holders and seat belts. They were removed from a totaled 41K mile tahoe.

rodstored-72 - the inner fenders were removed and thrown out when I did the bags. sorry. I am about 2 hours from San Diego btw.

*Sublvr72* · 06-23-2005, 04:09 AM

shameless bump

milehightoyz · 06-23-2005, 04:37 PM

im interested in the spindles? how much? and also what would the price be for all the front brake parts needed for disc conversion on my 68?

*Sublvr72* · 06-23-2005, 08:41 PM

Complete rebuilt suspension with spindle, brakes, control arms, tie rods, etc. $500

*newin72* · 06-23-2005, 10:48 PM

i'll take the hatch/liftgate rubbers, the rocker panel and whatever else you feel like throwing in the same box!

how much shipped to 75605?

got any more rubber/panels...

also, give me more info on the motor trans... who rebuilt it etc.??

*Sublvr72* · 06-24-2005, 03:49 PM

Let me check on the shipping for the seals and the rocker. I will get back to you.

*Sublvr72* · 06-26-2005, 03:12 AM

ttt

*Sublvr72* · 06-27-2005, 05:40 AM

newin72 - I will get that shipping quote for you tomorrow

06-17-2005, 09:21 AM	#27
sixty8c10 MY EX DRIVES A BROOM Join Date: Nov 2003 Location: Herington, KS Posts: 869	i'm interested in the airbag setup, do you have front and rear? compressor(s), tank(s), lines, switches, etc. how much shipped to 70659? __________________ They say nobody's perfect. I'm a nobody, so I must be perfect. Building Nemo -1968 C10 Long Bed FRED -1947 KB-2 International

06-17-2005, 10:43 AM	#28
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Steering wheel How much for the steering wheel and all adapter parts? And shipping to 16335? Thanks. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

06-18-2005, 12:48 PM	#32
c-1072 Registered User Join Date: Sep 2004 Location: rochester NY Posts: 777	steering wheel Any interest in selling the steering wheel ?

06-19-2005, 01:12 PM	#35
sixty8c10 MY EX DRIVES A BROOM Join Date: Nov 2003 Location: Herington, KS Posts: 869	pm'd ya __________________ They say nobody's perfect. I'm a nobody, so I must be perfect. Building Nemo -1968 C10 Long Bed FRED -1947 KB-2 International

06-22-2005, 10:38 AM	#41
Nightrider Registered User Join Date: Jan 2001 Location: Anywhere, Texas Posts: 253	seats? __________________ ] : - 71' burb,5.3,4wd 02' f350.7.3 00' F250-powerstroke 00' Roadstar 84' Eagle model 10 72' GMC 18' camery 12' ZX14R-

06-18-2005, 12:41 PM	#31
Sublvr72 Account Suspended Join Date: May 2004 Location: Simi Valley, CA Posts: 1,387	ttt

06-18-2005, 03:54 PM	#33
Sublvr72 Account Suspended Join Date: May 2004 Location: Simi Valley, CA Posts: 1,387	steering wheel is already gone...

06-19-2005, 12:28 PM	#34
curley1 Registered User Join Date: Jan 2004 Location: los banos, ca Posts: 84	72:is the motor&trans for sale? I also might be interested in the front suspension stuff.. What's the info on the motor??? stock or modified thanks curley

06-20-2005, 07:36 PM	#38
Sublvr72 Account Suspended Join Date: May 2004 Location: Simi Valley, CA Posts: 1,387	steering wheel is gone.

06-20-2005, 07:39 PM	#39
Sublvr72 Account Suspended Join Date: May 2004 Location: Simi Valley, CA Posts: 1,387	here is a close up pic of one of the wheels, I took it off and polished it to show how clean they are. Drivers front wheel after polish

06-21-2005, 12:02 AM	#40
Sublvr72 Account Suspended Join Date: May 2004 Location: Simi Valley, CA Posts: 1,387	ttt

06-22-2005, 11:08 AM	#42
rodstored-72 chevy truck fan Join Date: Mar 2005 Location: Gilbert, arizona 85298 Posts: 1,984	Sublvr72, if the inner fenders are not rusted or dented i am interested in them, if available. i am in chandler,az. i will be in san diego in a couple of weeks, how far is that to where you are??? if i get them then maybe i can pick them up?? you can pm with more info.. thanks! rodstored-72

06-22-2005, 04:58 PM	#43
Sublvr72 Account Suspended Join Date: May 2004 Location: Simi Valley, CA Posts: 1,387	Seats are for sale (as a package), I will also consider partial trade for a bench seat. I want $1000 for the seat set, two buckets, center console, 60/40 split folding bench with drink holders and seat belts. They were removed from a totaled 41K mile tahoe. rodstored-72 - the inner fenders were removed and thrown out when I did the bags. sorry. I am about 2 hours from San Diego btw.

06-23-2005, 04:09 AM	#44
Sublvr72 Account Suspended Join Date: May 2004 Location: Simi Valley, CA Posts: 1,387	shameless bump

06-23-2005, 04:37 PM	#45
milehightoyz AttentionDeficitDisorder Join Date: Mar 2005 Location: COLORADO Posts: 600	im interested in the spindles? how much? and also what would the price be for all the front brake parts needed for disc conversion on my 68?



Register or Log In To remove these advertisements.

06-23-2005, 08:41 PM	#46
Sublvr72 Account Suspended Join Date: May 2004 Location: Simi Valley, CA Posts: 1,387	Complete rebuilt suspension with spindle, brakes, control arms, tie rods, etc. $500

06-23-2005, 10:48 PM	#47
newin72 Account Suspended Join Date: May 2005 Location: East Texas Posts: 545	i'll take the hatch/liftgate rubbers, the rocker panel and whatever else you feel like throwing in the same box! how much shipped to 75605? got any more rubber/panels... also, give me more info on the motor trans... who rebuilt it etc.??

06-24-2005, 03:49 PM	#48
Sublvr72 Account Suspended Join Date: May 2004 Location: Simi Valley, CA Posts: 1,387	Let me check on the shipping for the seals and the rocker. I will get back to you.

06-26-2005, 03:12 AM	#49
Sublvr72 Account Suspended Join Date: May 2004 Location: Simi Valley, CA Posts: 1,387	ttt

06-27-2005, 05:40 AM	#50
Sublvr72 Account Suspended Join Date: May 2004 Location: Simi Valley, CA Posts: 1,387	newin72 - I will get that shipping quote for you tomorrow

Register or Log In To remove these advertisements.