Parting out 1971 C10 Shortbed. - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70c10swb · 08-22-2005, 10:55 PM

Quote:

Originally Posted by grendel

I have used but solid bedsides I am going to use, a blazer tailgate in very good shape. Just looking for the floor (might use a later model one) and the front.

might be alittle work but you ever think about doing a wood floor?

oh if samwise68 doesnt take the fenders and if you still have them by then i might snag those too (funds permiting of course)

*FormerMember* · 08-22-2005, 11:14 PM

Quote:

Originally Posted by 70c10swb

might be alittle work but you ever think about doing a wood floor?

oh if samwise68 doesnt take the fenders and if you still have them by then i might snag those too (funds permiting of course)

I've thought about it.

Considering this truck will never see any weight in the bed, it make make more sense.

*FormerMember* · 08-23-2005, 09:38 AM

So, the tie rods are gone with the center link.

I am rebuilding the power steering box, it's soaking in the parts washer as I type.

What else do people need?

BTW, my prices are negotiable. I'd really like to get this stuff out of my driveway.

The 402 is up for grabs.

I am going with this, installing roller rockers back on it now:

*FormerMember* · 08-23-2005, 10:03 AM

Also, chassis is posted here:

http://67-72chevytrucks.com/vboard/s....php3?t=169479

70c10swb · 08-23-2005, 05:15 PM

Quote:

Originally Posted by grendel

So, the tie rods are gone with the center link.

I am rebuilding the power steering box, it's soaking in the parts washer as I type.

What else do people need?

BTW, my prices are negotiable. I'd really like to get this stuff out of my driveway.

The 402 is up for grabs.

I am going with this, installing roller rockers back on it now:

yeah like i said i am cosidering the bed but i wont be able to give it a go for a couple of weeks

*FormerMember* · 08-23-2005, 05:36 PM

Quote:

Originally Posted by 70c10swb

yeah like i said i am cosidering the bed but i wont be able to give it a go for a couple of weeks

No worries, no other tire kickers atm.

Also look like I just won a really awesome and really expensive bed floor.

70c10swb · 08-23-2005, 05:41 PM

Quote:

Originally Posted by grendel

No worries, no other tire kickers atm.

Also look like I just won a really awesome and really expensive bed floor.

*FormerMember* · 08-23-2005, 05:52 PM

Now all I need is a bed front and this one's free and clear for you.

70c10swb · 08-23-2005, 09:18 PM

good to hear

and TTT for you

GMC AMI · 08-24-2005, 05:47 AM

Quote:

Originally Posted by grendel

Now all I need is a bed front and this one's free and clear for you.

Hey John, I have a real nice wood floor bed front up here as well!

A 402 is great trading material. A whole 68 4x4 truck for a motor and I will toss in the bed panel.

*FormerMember* · 08-24-2005, 08:15 AM

Quote:

Originally Posted by Mike Files

Hey John, I have a real nice wood floor bed front up here as well!

Mike, quit teasing me!

GMC AMI · 08-24-2005, 12:09 PM

Quote:

Originally Posted by grendel

Mike, quit teasing me!

No teasing, a very nice pleasing front panel! not all dented to he## like most originals. At least if they were used as real working trucks!

Please check my other post as I edited the wrong one.

*FormerMember* · 08-24-2005, 05:23 PM

Quote:

Originally Posted by Mike Files

No teasing, a very nice pleasing front panel! not all dented to he## like most originals. At least if they were used as real working trucks!

Please check my other post as I edited the wrong one.

As now I see what you mean.

I won't be able to pull the 402 in time. Kurt's trying to get me to his house on Friday by 6am!

Also, looks like I am driving to KY soon to pick up a very nice and very expensive bed floor.

Still need a very nice 67-68 front clip. I think my wife would scream if I brought home another project!

Need some very nice SBC heads with roller rockers and a roller cam retro fit?

tripleblack · 08-25-2005, 10:25 AM

hows the frame and how much?

*FormerMember* · 08-25-2005, 10:31 AM

Quote:

Originally Posted by tripleblack

hows the frame and how much?

The frame is very solid.

I have the frame, cab with title, front suspension, rear suspension with a 3.73 coiled 10 bolt for 1K. However, I am open to offers to get rid of this thing.

I am hanging onto the bed for 70C10swb and the front clip and interior is up for grabs.

At this point, I am not even using the interior.

my new cab is a bucket truck, so I am installing buckets.

70c10swb · 08-25-2005, 08:21 PM

Quote:

Originally Posted by grendel

The frame is very solid.

I have the frame, cab with title, front suspension, rear suspension with a 3.73 coiled 10 bolt for 1K. However, I am open to offers to get rid of this thing.

I am hanging onto the bed for 70C10swb and the front clip and interior is up for grabs.

At this point, I am not even using the interior.

my new cab is a bucket truck, so I am installing buckets.

thnaks for looking out

*FormerMember* · 08-25-2005, 08:25 PM

YW.

Although I'd really prefer you to come and look at it, say you'll take it and then come get it later.

70c10swb · 08-26-2005, 01:03 AM

i would if you were closer (over 100 miles each way)

samwise68 · 08-26-2005, 11:56 AM

grendel, great price on the front clip. just don't have the funds right now. maybe i'll get back to you if you still have it, ocne some cash comes in. thanks.

.sam.

*FormerMember* · 08-27-2005, 07:42 PM

This whole truck minus engine and transmission is now available.

*FormerMember* · 08-28-2005, 09:40 PM

delivery could be done very easily on any of these on the eastern seaboard...

70c10swb · 08-28-2005, 11:37 PM

just a quick thought since i cant make it up that way soon, do you think you could snap a few pics of the problem areas? If not no big deal

*FormerMember* · 08-29-2005, 07:10 AM

Quote:

Originally Posted by 70c10swb

just a quick thought since i cant make it up that way soon, do you think you could snap a few pics of the problem areas? If not no big deal

Yes, when I get back from my sojourn, no problem.

70c10swb · 08-29-2005, 06:53 PM

Quote:

Originally Posted by grendel

Yes, when I get back from my sojourn, no problem.

70c10swb · 09-02-2005, 06:42 PM

still interested
ttt

08-23-2005, 09:38 AM	#28
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	So, the tie rods are gone with the center link. I am rebuilding the power steering box, it's soaking in the parts washer as I type. What else do people need? BTW, my prices are negotiable. I'd really like to get this stuff out of my driveway. The 402 is up for grabs. I am going with this, installing roller rockers back on it now: Last edited by FormerMember; 10-04-2007 at 06:33 PM.

08-23-2005, 09:18 PM	#34
70c10swb no brain no headache Join Date: Jan 2005 Location: Cape Cod MA Posts: 567	good to hear and TTT for you __________________ 1996 GMC Sierra z71 1970 SWB 2wd (project)

08-26-2005, 01:03 AM	#43
70c10swb no brain no headache Join Date: Jan 2005 Location: Cape Cod MA Posts: 567	i would if you were closer (over 100 miles each way) __________________ 1996 GMC Sierra z71 1970 SWB 2wd (project)

08-28-2005, 11:37 PM	#47
70c10swb no brain no headache Join Date: Jan 2005 Location: Cape Cod MA Posts: 567	just a quick thought since i cant make it up that way soon, do you think you could snap a few pics of the problem areas? If not no big deal __________________ 1996 GMC Sierra z71 1970 SWB 2wd (project)

09-02-2005, 06:42 PM	#50
70c10swb no brain no headache Join Date: Jan 2005 Location: Cape Cod MA Posts: 567	still interested ttt __________________ 1996 GMC Sierra z71 1970 SWB 2wd (project)

08-23-2005, 10:03 AM	#29
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Also, chassis is posted here: http://67-72chevytrucks.com/vboard/s....php3?t=169479

08-23-2005, 05:52 PM	#33
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Now all I need is a bed front and this one's free and clear for you.

08-25-2005, 10:25 AM	#39
tripleblack short sell Ford stock Join Date: Aug 2005 Location: Houston, Texas Posts: 104	hows the frame and how much?

08-25-2005, 08:25 PM	#42
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	YW. Although I'd really prefer you to come and look at it, say you'll take it and then come get it later.

08-26-2005, 11:56 AM	#44
samwise68 FarmBoy. Join Date: Feb 2005 Location: Rhinelander, WI Posts: 1,103	grendel, great price on the front clip. just don't have the funds right now. maybe i'll get back to you if you still have it, ocne some cash comes in. thanks. .sam.

08-27-2005, 07:42 PM	#45
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	This whole truck minus engine and transmission is now available.

08-28-2005, 09:40 PM	#46
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	delivery could be done very easily on any of these on the eastern seaboard...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.