My 69 custom/30 rollback project - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*bisquik65* · 01-15-2006, 11:24 AM

Quote:

Originally Posted by bojoe

That is a good idea what you are doing there. There is an awful lot of motorhome chassis running around with little or no miles on it. Looking good.

The little CST/10 just grew up to a CST/30 when i can find a pair of CST/30 fender badges...

*bisquik65* · 01-22-2006, 06:30 PM

I did get the lower bed of the rollback off today...Waiting for better weather to cut the frame and set it on...Its going to the maggey valley show...

longhorn71 · 01-22-2006, 07:31 PM

lookin great

keep us updated

**special-K** · 01-22-2006, 08:32 PM

I`m liking it!

*72CSTC5* · 01-22-2006, 09:25 PM

Dude, I have to ask. You are doing all of this work outside in the mud in your yard? Also, are you married with all of that junk around your house!!!! My wife would kill me. If I do not sweep up the garage after I am done working she just says, cant you clean up after yourself. Your wife must love you. Good luck with the project. Are you going to blast and paint everything since you have it all apart?

*bisquik65* · 01-22-2006, 09:32 PM

Quote:

Originally Posted by 72CSTC5

Dude, I have to ask. You are doing all of this work outside in the mud in your yard? Also, are you married with all of that junk around your house!!!! My wife would kill me. If I do not sweep up the garage after I am done working she just says, cant you clean up after yourself. Your wife must love you. Good luck with the project. Are you going to blast and paint everything since you have it all apart?

I have no shop big enough to put that in...My shop has a 96 taruas in it,barely can shut the doors

And i am not married..not yet anyway...And My whole yard is nothing but mud..

I am about sick of it myself..The landlord here started the yard thing 3 years ago...and its not done yet.. And yes its all going to be painted...The truck frame will have 12 inches between the cab and bed for a toolbox...And peterbilt chrome stacks...striaght up the rear of the cab...

LUV2XCLR8 · 01-22-2006, 09:35 PM

Sweeeeet Eric

*bisquik65* · 01-22-2006, 09:39 PM

Quote:

Originally Posted by LUV2XCLR8

Sweeeeet Eric

I need to stay off here for 2 hours time and get it wired up so it will run again...I have 4 wires to hook to the motor and just can't get time to do it

And i need to put the hydraboost setup on it too...It has 4 wheel disk brakes......

*72CSTC5* · 01-22-2006, 09:42 PM

Whew, I wish I was in your shoes right about now. Mine keeps *****ing because I am on this computer instead of doing house work. Damn, can't they just leave us alone to enjoy something every once in while. I went to her company party last night with a tie on and everything. I told her all the ties do is keep the foreskin down of all the ****heads that work for her company. HaHa. Keep us informed on the project. Looks like you will have a nice car hauler for cheap!!

krue · 01-22-2006, 09:43 PM

Looks good.

71chevytruckguy · 01-22-2006, 09:52 PM

that's gonna be real slick. can't wait to see it when it's done. good luck.

*bisquik65* · 01-22-2006, 10:24 PM

Quote:

Originally Posted by 71chevytruckguy

that's gonna be real slick. can't wait to see it when it's done. good luck.

It will be a month or so....And does this look like something you had?

71chevytruckguy · 01-25-2006, 10:42 PM

could have sworn i've seen that before? oh yeah, my back yard. lol. how was the trip back? make it up there in one piece?

FRENCHBLUE72 · 01-25-2006, 11:08 PM

Thats gonna be pretty nice when its done....

*bisquik65* · 01-31-2006, 11:26 PM

ttt

Alamoman · 02-10-2006, 11:42 PM

Novel idea! How much of the motorhome frame are you using? I guess you will register it with the cab as C30? Keep up the good work.

*bisquik65* · 02-11-2006, 09:40 AM

Quote:

Originally Posted by Alamoman

Novel idea! How much of the motorhome frame are you using? I guess you will register it with the cab as C30? Keep up the good work.

The motor home frame is 32 feet total length..i need to cut 2 feet off the back,then the rollback lower frame goes on it..and has 2 feet behind the frame for the wheel lift towbar..I can haul 2 cars or trucks...one on the deck,one on the bar

The title on the motor home says Incomplete chassis...77 model..And i have the 69 C/10 title..I take both to DMV ...state issues a new vin..# That simple.. I will keep everyone updated...But it will be a while...8-12 inches of snow today,and tonight..

*bisquik65* · 02-15-2006, 07:36 PM

More pics today got the steering on so i can move it

*bisquik65* · 02-15-2006, 07:43 PM

And that is 529,626 miles on the truck...chassis has 21,000 miles

*bisquik65* · 03-10-2006, 06:55 PM

I am working on it today...pics going to be on here tomorrow,got stering and brakes fixed,got to have that before you start it up...lol

LUV2XCLR8 · 03-10-2006, 07:14 PM

Quote:

Originally Posted by bisquik65

I am working on it today...pics going to be on here tomorrow

Better be, we are gonna hold you to it

**Palf70Step** · 03-10-2006, 10:34 PM

davidh · 03-11-2006, 12:27 AM

Curious, what did that truck start out as?

HeavyD · 03-11-2006, 12:51 AM

Purple inserts in the seats is something I have never seen before. Going to be a nice truck!

chevy_fatman · 03-11-2006, 03:22 AM

It's tomorrow already!

and you don't need no stinking brakes

01-22-2006, 06:30 PM	#27
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	Re: My 69 custom/30 rollback project I did get the lower bed of the rollback off today...Waiting for better weather to cut the frame and set it on...Its going to the maggey valley show... Attached Images

01-22-2006, 07:31 PM	#28
longhorn71 Senior Member Join Date: Sep 2004 Location: CANADA Posts: 1,681	Re: My 69 custom/30 rollback project lookin great keep us updated

01-22-2006, 08:32 PM	#29
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: My 69 custom/30 rollback project I`m liking it! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-22-2006, 09:25 PM	#30
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,522	Re: My 69 custom/30 rollback project Dude, I have to ask. You are doing all of this work outside in the mud in your yard? Also, are you married with all of that junk around your house!!!! My wife would kill me. If I do not sweep up the garage after I am done working she just says, cant you clean up after yourself. Your wife must love you. Good luck with the project. Are you going to blast and paint everything since you have it all apart?

01-22-2006, 09:35 PM	#32
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: My 69 custom/30 rollback project Sweeeeet Eric __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

01-22-2006, 09:42 PM	#34
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,522	Re: My 69 custom/30 rollback project Whew, I wish I was in your shoes right about now. Mine keeps ***ing because I am on this computer instead of doing house work. Damn, can't they just leave us alone to enjoy something every once in while. I went to her company party last night with a tie on and everything. I told her all the ties do is keep the foreskin down of all the **heads that work for her company. HaHa. Keep us informed on the project. Looks like you will have a nice car hauler for cheap!!

01-22-2006, 09:43 PM	#35
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: My 69 custom/30 rollback project Looks good. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

01-22-2006, 09:52 PM	#36
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: My 69 custom/30 rollback project that's gonna be real slick. can't wait to see it when it's done. good luck. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

01-25-2006, 10:42 PM	#38
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: My 69 custom/30 rollback project could have sworn i've seen that before? oh yeah, my back yard. lol. how was the trip back? make it up there in one piece? __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

01-25-2006, 11:08 PM	#39
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: My 69 custom/30 rollback project Thats gonna be pretty nice when its done.... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

01-31-2006, 11:26 PM	#40
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	Re: My 69 custom/30 rollback project ttt

02-10-2006, 11:42 PM	#41
Alamoman Registered User Join Date: Jan 2006 Location: Middle of Nowhere, NM Posts: 3	Re: My 69 custom/30 rollback project Novel idea! How much of the motorhome frame are you using? I guess you will register it with the cab as C30? Keep up the good work. __________________ If You're Not Making Mistakes, You're Not Taking Enough Risks! 72 Blazer CST 4x4 350/4spd (needs body/int work) 75 1/2 ton stepside 350/4spd, (restrorod?) 67 C20 1 Ton Dually 396/4spd flat bed, (car hauler?) Anyone got a dovetail?

02-15-2006, 07:36 PM	#43
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	Re: My 69 custom/30 rollback project More pics today got the steering on so i can move it Attached Images

02-15-2006, 07:43 PM	#44
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	Re: My 69 custom/30 rollback project And that is 529,626 miles on the truck...chassis has 21,000 miles Attached Images

03-10-2006, 06:55 PM	#45
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	Re: My 69 custom/30 rollback project I am working on it today...pics going to be on here tomorrow,got stering and brakes fixed,got to have that before you start it up...lol



Register or Log In To remove these advertisements.

03-10-2006, 10:34 PM	#47
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: My 69 custom/30 rollback project __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

03-11-2006, 12:27 AM	#48
davidh Senior Member Join Date: Feb 2004 Location: Ponca city now kingfisher Oklahoma Posts: 1,220	Re: My 69 custom/30 rollback project Curious, what did that truck start out as?

03-11-2006, 12:51 AM	#49
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,180	Re: My 69 custom/30 rollback project Purple inserts in the seats is something I have never seen before. Going to be a nice truck! __________________ "You can take the man out of PA, but you can't take PA out of the man"

03-11-2006, 03:22 AM	#50
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,620	Re: My 69 custom/30 rollback project It's tomorrow already! and you don't need no stinking brakes __________________ Paul How do you make the invisible, visible?.........You take it away.

Register or Log In To remove these advertisements.