Project Monster Truck (Magnum) Finished - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**71blksuper4x4** · 04-26-2006, 11:10 AM

Here they are on the truck.... looks like a 1 to 2 inch lift higher and we are all set.

2wdBlazer · 04-26-2006, 01:45 PM

Wow. Just when I thought that truck was bad ass, you go and make it look meaner. those 49's are a huge difference.

1967k30 · 04-27-2006, 11:16 AM

Crap,those 49"s are big! I've seen some before and I didn't think they looked that big. Now you will need a D60 soon.

GMC71k20 · 04-27-2006, 11:26 AM

ridiculous. looks awesome. how are those gonna be on the street? should be fun hving that at school

stan79chevy · 04-27-2006, 08:51 PM

in michigan it wouldnt be legal. tires can only be so far outside the body and the frame cant be any higher than 26 or 28 inches off the ground. lets see some pics of it nice and dirty and see how them iroks do. ive heard bad stuff about them but they do look good.

stan

**Zoomad75** · 04-28-2006, 04:28 PM

49" Iroks on a 10 bolt front? Hope that thing never gets off road, or if you do you have a dozen spare axle shafts/ujoints for the front end. As far as a lifted show type truck goes, it looks pretty good. But I think you might have been better off actually getting a D60 (which with 49" tires is not bulletproof either). and sticking with the slightly shorter boggers until you wore them out...

I'm not flaming, its still a nice truck with a good SAS done to it. Just not strong enough axles for the tires. But hey thats just my opinion...

**71blksuper4x4** · 04-28-2006, 05:26 PM

I know the 10 bolt has to go... but for now... it will just see pavement anyways... and I do have my line on a few D60's. Some that have been built stronger than most. I will keep people posted.

**Yukon Jack** · 04-28-2006, 09:15 PM

Wow! So, how tall to the top of the cab?

Chevrolet4x4s · 04-28-2006, 09:38 PM

36 inches bottom of bumper to ground here to be legal(I think) but thats an awesome truck.
Shane

**71blksuper4x4** · 04-28-2006, 11:10 PM

Yukon- It was around 8'3" with the 44"s so I would guess around 8'7" -8'9" now.

Chevrolet... The height rule in KS is 54" to the bottom of your headlight.

Chevrolet4x4s · 04-30-2006, 11:44 AM

So essentially if you mount your headlights on your axle housing you could ru tires some where in the 108 inch range?Always looking for loopholes
Shane

FRENCHBLUE72 · 05-14-2006, 05:34 PM

Wow that thing is bad azz..

Oldtruckfanatic · 05-14-2006, 05:44 PM

That truck is WICKED nice job! Better get the oxygen masks out in case of cabin depressurization. LOL All kidding aside that is a sweet truck I've never seen that particular body style done up that way.

me nuflynn · 06-03-2006, 11:12 AM

nicely done. Doesnt look like it'll be in that garage or any for that matter. I would be putting a full roll cage inside for sure though. One that goes to the frame not just the cab.

Hoods69BadBowTie · 06-03-2006, 06:14 PM

Damn, and I thought it looked Bad azz with the 44" Boggers but those 49" Iroks are completely off the hook. Should be a blast to drive around. Are u planning on mudding at all with the new axle setup or not? Congrats on a job well done.
-Later

wibilly · 06-10-2006, 12:41 AM

nice truck now you need them folding attic staircases to put in the rear doors

chevyfreak2 · 08-09-2008, 01:35 AM

damn i would piss myself if ever got to drive (or see a truck like that for that matter) Good Job

vtblazer · 08-09-2008, 06:51 AM

Quote:

Originally Posted by 71blksuper4x4

I know the 10 bolt has to go... but for now... it will just see pavement anyways... and I do have my line on a few D60's. Some that have been built stronger than most. I will keep people posted.

Forget the D60, you've already outgrown it, go straight to Rockwells.

I've wheeled with guys on 49's, they make everything else look tiny.

*FormerMember* · 08-09-2008, 06:47 PM

Quote:

Originally Posted by vtblazer

Forget the D60, you've already outgrown it, go straight to Rockwells.

I've wheeled with guys on 49's, they make everything else look tiny.

Heh, Rockwells with Ouverson chromo shafts...

LONGHAIR · 08-09-2008, 07:21 PM

2 year old post ...the newbie must have been bored @ 1:30 A.M.

chevyfreak2 · 08-09-2008, 07:51 PM

Quote:

Originally Posted by LONGHAIR

2 year old post ...the newbie must have been bored @ 1:30 A.M.

hey, i had just got home, yes i was board and thats the first time a had seen this thread

royo · 08-09-2008, 08:34 PM

oh well who cares thats a nice truck .wonder if its still around

**71blksuper4x4** · 03-01-2010, 11:40 PM

yes, it's still around here. I just don't drive it as much as I should. Trevor

Hoods69BadBowTie · 03-02-2010, 02:50 AM

Sweet deal lol well we defiantly need 2 see some more pictures of it buddy

1970GMC468 · 03-03-2010, 10:28 PM

Looks great! Keep them big boys on the road!
Chad

04-26-2006, 11:10 AM	#26
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Project Monster Truck (Magnum) Finished 49" Iroks Here they are on the truck.... looks like a 1 to 2 inch lift higher and we are all set. Attached Images __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever Last edited by 71blksuper4x4; 04-26-2006 at 11:11 AM.

04-26-2006, 01:45 PM	#27
2wdBlazer The Blazer King Join Date: Sep 2000 Location: Valrico, Fl (Tampa) Posts: 1,212	Re: Project Monster Truck (Magnum) Finished Wow. Just when I thought that truck was bad ass, you go and make it look meaner. those 49's are a huge difference. __________________ 72 2wd Blazer. Its the superbichinest, megacoolinest, superflowinest.

04-27-2006, 11:16 AM	#28
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: Project Monster Truck (Magnum) Finished Crap,those 49"s are big! I've seen some before and I didn't think they looked that big. Now you will need a D60 soon. __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

04-27-2006, 11:26 AM	#29
GMC71k20 Registered User Join Date: Aug 2002 Location: mass Posts: 1,277	Re: Project Monster Truck (Magnum) Finished ridiculous. looks awesome. how are those gonna be on the street? should be fun hving that at school

04-27-2006, 08:51 PM	#30
stan79chevy Registered User Join Date: Sep 2003 Location: COVINGTON GEORGIA Posts: 477	Re: Project Monster Truck (Magnum) Finished in michigan it wouldnt be legal. tires can only be so far outside the body and the frame cant be any higher than 26 or 28 inches off the ground. lets see some pics of it nice and dirty and see how them iroks do. ive heard bad stuff about them but they do look good. stan __________________ 79 chevy k20 350/350/205/D44/14bFF 4.56 gears rock LWB pimer black 01 S-10 ZR2 extended cab 4.3/4L60E/233 3.73 gear 31" DICK CEPEK CRUSHERS

04-28-2006, 04:28 PM	#31
Zoomad75 K5Camper Join Date: Mar 2004 Location: Pueblo, CO Posts: 1,513	Re: Project Monster Truck (Magnum) Finished 49" Iroks on a 10 bolt front? Hope that thing never gets off road, or if you do you have a dozen spare axle shafts/ujoints for the front end. As far as a lifted show type truck goes, it looks pretty good. But I think you might have been better off actually getting a D60 (which with 49" tires is not bulletproof either). and sticking with the slightly shorter boggers until you wore them out... I'm not flaming, its still a nice truck with a good SAS done to it. Just not strong enough axles for the tires. But hey thats just my opinion... __________________ Rob Z. 1975 K5 350/465/205/D44/12b 4" lift on 35's- RIP 1991 K5 8.1L/NV4500/241/D44/14b FWC Camper

04-28-2006, 05:26 PM	#32
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Project Monster Truck (Magnum) Finished I know the 10 bolt has to go... but for now... it will just see pavement anyways... and I do have my line on a few D60's. Some that have been built stronger than most. I will keep people posted. __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

04-28-2006, 09:15 PM	#33
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Re: Project Monster Truck (Magnum) Finished Wow! So, how tall to the top of the cab? __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

04-28-2006, 09:38 PM	#34
Chevrolet4x4s Registered User Join Date: Nov 2005 Location: WV Posts: 227	Re: Project Monster Truck (Magnum) Finished 36 inches bottom of bumper to ground here to be legal(I think) but thats an awesome truck. Shane __________________ 1993 K1500 350 5 speed 1985 K10 Silverado Vortec 406 5 speed (in body shop) "I been drivin' this '85 pickup truck Them buddies of mine call it a bucket of rust She's a little beat up but she still runs like the wind Yeah, kinda like me I been banged and bruisedBeen around the block a time or two But I'm runnin' like new goin' places I never been No, I ain't broke I'm just broken in" 1963 Dodge Townwagon(its amazng what 30 years and zero miles will do to a vehicle ) Member#20327

04-28-2006, 11:10 PM	#35
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Project Monster Truck (Magnum) Finished Yukon- It was around 8'3" with the 44"s so I would guess around 8'7" -8'9" now. Chevrolet... The height rule in KS is 54" to the bottom of your headlight. __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

04-30-2006, 11:44 AM	#36
Chevrolet4x4s Registered User Join Date: Nov 2005 Location: WV Posts: 227	Re: Project Monster Truck (Magnum) Finished So essentially if you mount your headlights on your axle housing you could ru tires some where in the 108 inch range?Always looking for loopholes Shane __________________ 1993 K1500 350 5 speed 1985 K10 Silverado Vortec 406 5 speed (in body shop) "I been drivin' this '85 pickup truck Them buddies of mine call it a bucket of rust She's a little beat up but she still runs like the wind Yeah, kinda like me I been banged and bruisedBeen around the block a time or two But I'm runnin' like new goin' places I never been No, I ain't broke I'm just broken in" 1963 Dodge Townwagon(its amazng what 30 years and zero miles will do to a vehicle ) Member#20327

05-14-2006, 05:34 PM	#37
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Project Monster Truck (Magnum) Finished Wow that thing is bad azz.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

05-14-2006, 05:44 PM	#38
Oldtruckfanatic Truck junkie Join Date: May 2006 Location: Reno NV Posts: 697	Re: Project Monster Truck (Magnum) Finished That truck is WICKED nice job! Better get the oxygen masks out in case of cabin depressurization. LOL All kidding aside that is a sweet truck I've never seen that particular body style done up that way.

06-03-2006, 11:12 AM	#39
me nuflynn Registered User Join Date: Apr 2006 Location: gresham or Posts: 5	Re: Project Monster Truck (Magnum) Finished nicely done. Doesnt look like it'll be in that garage or any for that matter. I would be putting a full roll cage inside for sure though. One that goes to the frame not just the cab.

06-03-2006, 06:14 PM	#40
Hoods69BadBowTie Chevys Kick A$$ Join Date: Jan 2005 Location: Zootown, MT Posts: 12,699	Re: Project Monster Truck (Magnum) Finished Damn, and I thought it looked Bad azz with the 44" Boggers but those 49" Iroks are completely off the hook. Should be a blast to drive around. Are u planning on mudding at all with the new axle setup or not? Congrats on a job well done. -Later __________________ HOODS is what I answer too -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER I would rather push a Chevy then drive a ford!!



Register or Log In To remove these advertisements.

06-10-2006, 12:41 AM	#41
wibilly Senior Member Join Date: Nov 2005 Location: northwestern wi Posts: 2,111	Re: Project Monster Truck (Magnum) Finished nice truck now you need them folding attic staircases to put in the rear doors __________________ common sense isn't so common anymore

08-09-2008, 01:35 AM	#42
chevyfreak2 Registered User Join Date: May 2008 Location: monroe Louisiana Posts: 28	Re: Project Monster Truck (Magnum) Finished damn i would piss myself if ever got to drive (or see a truck like that for that matter) Good Job

08-09-2008, 07:21 PM	#45
LONGHAIR just can't cover up my redneck Join Date: May 2004 Location: Columbus OH Posts: 11,414	Re: Project Monster Truck (Magnum) Finished 2 year old post ...the newbie must have been bored @ 1:30 A.M.

08-09-2008, 08:34 PM	#47
royo Registered User Join Date: Feb 2007 Location: knoxville tn Posts: 1,013	Re: Project Monster Truck (Magnum) Finished oh well who cares thats a nice truck .wonder if its still around __________________ nickle and dime

03-01-2010, 11:40 PM	#48
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Project Monster Truck (Magnum) Finished yes, it's still around here. I just don't drive it as much as I should. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

03-02-2010, 02:50 AM	#49
Hoods69BadBowTie Chevys Kick A$$ Join Date: Jan 2005 Location: Zootown, MT Posts: 12,699	Re: Project Monster Truck (Magnum) Finished Sweet deal lol well we defiantly need 2 see some more pictures of it buddy __________________ HOODS is what I answer too -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER I would rather push a Chevy then drive a ford!!

03-03-2010, 10:28 PM	#50
1970GMC468 Registered User Join Date: Jan 2008 Location: Orland, California Posts: 72	Re: Project Monster Truck (Magnum) Finished Looks great! Keep them big boys on the road! Chad

Register or Log In To remove these advertisements.