its about time - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ostncoln · 11-20-2007, 02:32 PM

thanks guys

camero thunder, i dont plan to bag this one, yet. i sure would like to have a setup like i had on the 85 as this one though.
are you going to go to the turkey drag? let me know if you see the truck around and maybe snap a few pictures for me

ostncoln · 06-02-2008, 11:23 PM

well here we are, nine months later. got the bed in primer and back on tonight. will post a picture tomorrow in the light

ostncoln · 06-03-2008, 06:34 PM

well here is a shot with the bed on it. i cant decide if i like how its sitting. i may go back and put a 1" block under the rear to get a little rake to it. i was going to try and put some color on it but i havent been able to drive it in so long i am going to slap it together and drive it like this for a while

what do you think?

ostncoln · 10-27-2008, 09:59 PM

6 weeks has to pain turned into an indefinite amount of time so i have decided to move on to something else. a little drivetrain work. got the front end mostly yanked off this afternoon before it got dark

OARNGESI · 11-26-2008, 12:13 AM

Got it looking pretty good

FRENCHBLUE72 · 11-27-2008, 01:21 PM

Looking good keep us all posted.

ostncoln · 03-20-2009, 11:20 PM

well the months go by and finally i have an updated pic. pulled the motor today. 5 months after getting ready to

nuke1 · 03-23-2009, 01:38 AM

Starting to look a little bare up front, it sure is amazing how time flies.

ostncoln · 05-25-2010, 10:42 AM

Well 15 months and job layoff I squeezed a little work in on the truck. One thing about having it blown apart is when the wife started talking about selling it to pay bills and it wasnt even rolling makes it easy to git that idea out of her head.

ostncoln · 06-07-2010, 12:16 PM

5/30/10. got motor/tranny back in. wish i had all the odds and ends to fire it up

OARNGESI · 08-04-2010, 01:20 AM

Looking really good

VA72C10 · 08-04-2010, 01:24 AM

definitely looking nice!

ostncoln · 08-09-2010, 06:11 PM

got a little work done over the weekend

before

powder

almost ready to roll

my helper

VA72C10 · 08-09-2010, 10:24 PM

Parts look great! Cute helper

jasonhall · 08-09-2010, 10:35 PM

Truck has come along ways.. It looks great

ostncoln · 09-05-2010, 10:31 PM

Did the heater box today, new core and gaskets. i enjoyed how they were just wadded up in the package.

also got one header wrapped

texastrendz · 09-05-2010, 10:48 PM

i think your upper ball joints are on the wrong side, i think they bolt to the top of the arm, not the bottom.

ostncoln · 09-19-2010, 11:59 AM

Quote:

Originally Posted by texastrendz

i think your upper ball joints are on the wrong side, i think they bolt to the top of the arm, not the bottom.

thanks for noticing that. i was able to swap them before getting to far along so it was still easy.

yesterday finished getting the suspension and steering put on along with the sway bar. truck didnt originally come with one, went with the smaller aftermarket brackets for lowered trucks. I love removing factory rivets.

and once again she rolls and steers!

kingfish73 · 09-19-2010, 02:57 PM

Quote:

Originally Posted by ostncoln

got a little work done over the weekend

before

powder

almost ready to roll

my helper

awsome pic

ostncoln · 09-27-2010, 10:26 AM

well got half the front clip on last night. the goal was the whole thing but my aftermarket inner fender proved to be a little difficult

huero · 09-27-2010, 11:14 AM

Quote:

Originally Posted by ostncoln

hell yeah, thats me.

More pics of that black Nova please.

ostncoln · 09-27-2010, 02:33 PM

ask and receive

huero · 09-27-2010, 02:41 PM

Thanks,
Cool car!

ostncoln · 12-10-2010, 04:24 PM

some color on my valve covers and air cleaner...

BB72CHEVKT · 12-10-2010, 04:58 PM

Quote:

Originally Posted by ostncoln

some color on my valve covers and air cleaner...

That looks sweet.

11-20-2007, 02:32 PM	#26
ostncoln Registered User Join Date: Sep 2006 Location: Amarillo, TX Posts: 178	Re: its about time thanks guys camero thunder, i dont plan to bag this one, yet. i sure would like to have a setup like i had on the 85 as this one though. are you going to go to the turkey drag? let me know if you see the truck around and maybe snap a few pictures for me __________________ 1971 C-10 Project 350/400 5/7 drop My Slow Build Thread

06-02-2008, 11:23 PM	#27
ostncoln Registered User Join Date: Sep 2006 Location: Amarillo, TX Posts: 178	Re: its about time well here we are, nine months later. got the bed in primer and back on tonight. will post a picture tomorrow in the light __________________ 1971 C-10 Project 350/400 5/7 drop My Slow Build Thread

06-03-2008, 06:34 PM	#28
ostncoln Registered User Join Date: Sep 2006 Location: Amarillo, TX Posts: 178	Re: its about time well here is a shot with the bed on it. i cant decide if i like how its sitting. i may go back and put a 1" block under the rear to get a little rake to it. i was going to try and put some color on it but i havent been able to drive it in so long i am going to slap it together and drive it like this for a while what do you think? __________________ 1971 C-10 Project 350/400 5/7 drop My Slow Build Thread

10-27-2008, 09:59 PM	#29
ostncoln Registered User Join Date: Sep 2006 Location: Amarillo, TX Posts: 178	Re: its about time 6 weeks has to pain turned into an indefinite amount of time so i have decided to move on to something else. a little drivetrain work. got the front end mostly yanked off this afternoon before it got dark __________________ 1971 C-10 Project 350/400 5/7 drop My Slow Build Thread

11-26-2008, 12:13 AM	#30
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: its about time Got it looking pretty good

11-27-2008, 01:21 PM	#31
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: its about time Looking good keep us all posted. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-20-2009, 11:20 PM	#32
ostncoln Registered User Join Date: Sep 2006 Location: Amarillo, TX Posts: 178	Re: its about time well the months go by and finally i have an updated pic. pulled the motor today. 5 months after getting ready to __________________ 1971 C-10 Project 350/400 5/7 drop My Slow Build Thread

03-23-2009, 01:38 AM	#33
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: its about time Starting to look a little bare up front, it sure is amazing how time flies. __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

05-25-2010, 10:42 AM	#34
ostncoln Registered User Join Date: Sep 2006 Location: Amarillo, TX Posts: 178	Re: its about time Well 15 months and job layoff I squeezed a little work in on the truck. One thing about having it blown apart is when the wife started talking about selling it to pay bills and it wasnt even rolling makes it easy to git that idea out of her head. __________________ 1971 C-10 Project 350/400 5/7 drop My Slow Build Thread

06-07-2010, 12:16 PM	#35
ostncoln Registered User Join Date: Sep 2006 Location: Amarillo, TX Posts: 178	Re: its about time 5/30/10. got motor/tranny back in. wish i had all the odds and ends to fire it up __________________ 1971 C-10 Project 350/400 5/7 drop My Slow Build Thread

08-04-2010, 01:20 AM	#36
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: its about time Looking really good __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

08-04-2010, 01:24 AM	#37
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: its about time definitely looking nice! __________________ Looking for a 67-72 swb or blazer project in or around VA.

08-09-2010, 06:11 PM	#38
ostncoln Registered User Join Date: Sep 2006 Location: Amarillo, TX Posts: 178	Re: its about time got a little work done over the weekend before powder almost ready to roll my helper __________________ 1971 C-10 Project 350/400 5/7 drop My Slow Build Thread

08-09-2010, 10:24 PM	#39
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: its about time Parts look great! Cute helper __________________ Looking for a 67-72 swb or blazer project in or around VA.

08-09-2010, 10:35 PM	#40
jasonhall Registered User Join Date: May 2008 Location: Stillwater Oklahoma Posts: 829	Re: its about time Truck has come along ways.. It looks great



Register or Log In To remove these advertisements.

09-05-2010, 10:31 PM	#41
ostncoln Registered User Join Date: Sep 2006 Location: Amarillo, TX Posts: 178	Re: its about time Did the heater box today, new core and gaskets. i enjoyed how they were just wadded up in the package. also got one header wrapped __________________ 1971 C-10 Project 350/400 5/7 drop My Slow Build Thread Last edited by ostncoln; 09-05-2010 at 10:32 PM.

09-05-2010, 10:48 PM	#42
texastrendz Registered User Join Date: Jan 2008 Location: HOUSTON TX Posts: 1,161	Re: its about time i think your upper ball joints are on the wrong side, i think they bolt to the top of the arm, not the bottom.

09-27-2010, 10:26 AM	#45
ostncoln Registered User Join Date: Sep 2006 Location: Amarillo, TX Posts: 178	Re: its about time well got half the front clip on last night. the goal was the whole thing but my aftermarket inner fender proved to be a little difficult __________________ 1971 C-10 Project 350/400 5/7 drop My Slow Build Thread

09-27-2010, 02:33 PM	#47
ostncoln Registered User Join Date: Sep 2006 Location: Amarillo, TX Posts: 178	Re: its about time ask and receive __________________ 1971 C-10 Project 350/400 5/7 drop My Slow Build Thread

09-27-2010, 02:41 PM	#48
huero 1969 Short, Fleet, and Beat Join Date: Apr 2007 Location: Long Beach, Ca. Posts: 867	Re: its about time Thanks, Cool car!

12-10-2010, 04:24 PM	#49
ostncoln Registered User Join Date: Sep 2006 Location: Amarillo, TX Posts: 178	Re: its about time some color on my valve covers and air cleaner... __________________ 1971 C-10 Project 350/400 5/7 drop My Slow Build Thread

Register or Log In To remove these advertisements.