cab patches f/s

[ScottH]

Bill, is the sideview mirror shown in the first pic available? Do u have one or two? Shipping would be to NJ 08753

Thanks.

Scott

[BACKYARD88]

Got my patch this weekend Bill. Thanks!

[billsbowtie]

scott it will have to be drilled out to get it off bracket is good only have the 1 mirror is cracked $20.00 shipped if you want it.
mike you're welcome.

[msgross]

Bill, let me get you some pics of the area that I need. Basically the back inside corners of the floor. Including the area that holds the seatbelts...

[Chevy_Man]

Hey bill how r the vent kick panels?

Eric

[1LoC10]

This is my cab, anyway I could get the upper rear corner behind the outside drivers door? also is the inner roof skin able to be removed, or no? i have rust over my windshield too.

[billsbowtie]

ok mike send pics.
eric i will check kick panels.
1loc10 i will look at your pics. and get back with you.

[billsbowtie]

1loc10 in the frist pic. do you just need the outer part than is showed in the pic.? in the 2nd pic. my frist cab will not have that patch. but i have 3 other cabs i can check to see if i can get you that one. bill

[msgross]

well, here's my problem areas.... don't know if its possible to get a patch from another cab or if I just need to fab up something on my own....

[billsbowtie]

msgross do you also need part of the door jam under neith the vin? i will check my cabs to see if i can get these for you. price will be $12.50 a patch plus $15.00 shipping total will be $40.00 i will cut the patches big enough to get both spots you have marked on each side . this is if the spots are good in my cabs. i wanted you to know prices before i cut because sawzaw blades and grinder wheels are not to cheap. bill

[ScottH]

Bill, thanks for letting me know. I found some I already had that will work.

Scott

[msgross]

snap some pics of what you are going to use and i'll mark them again...

nothing under VIN, that line was to show that I need the entire hidden part behind the cab corner.

[billsbowtie]

ok

[billsbowtie]

mike the cabs i have here are rusty in those places also.
1loc10 i think i can get you the patch in the frist pic. if you just need the outer part. the 2nd pic. my cabs here are bad there to.
eric kick panels have been repaired before.
buy guys i have 2 more cabs that i have not got home yet so i will check back when i get them here to see if you have found what you need yet.
1loc10 do you want me to go ahead and cut the 1 i have and wait and see on the other?

[1LoC10]

yeah I would just need the outer part if possible... let me know

[billsbowtie]

i will try to cut it out tomarrow and get you a pic.

[billsbowtie]

this is the cab i will cut it from could you tell me about how many inches from the cab line where it is put together that you need ? looks like about maybe 5 inches in ft. of line and maybe 12 to 15 inches down back of cab from line.

[msgross]

thanks for looking anyways...

[billsbowtie]

don't give up yet mike when i get my other 2 cabs in i will check them.

[1LoC10]

from that body line, i measured about 5 inches towards the roof, and about 10 inches down... as long as I have the contour I can work with it... thanks again

[billsbowtie]

i am working on cutting it taday waiting till the sawzaw batteries charge back up.

[billsbowtie]

1loc10 here it is i cut it a little larger to make sure you have enough $20.00 for the patch and we will wait to check shipping intill i see if i get the other patch you need in a few days. if so i will ship both together to help with shipping cost.

[billsbowtie]

heres the back side.

[billsbowtie]

there are still a few patches left anyone else need any?

[billsbowtie]