Parts Yard Meets Metal Dumpster

[vtblazer]

Originally Posted by grendel

Kurt, do you think the Burb cab would be a good candidate for a Crew Cab conversion?

(thinking evil thoughts that will probably net me another project...)

Sure, it'd be a sweet set up but you'd need to replace the floor at a minimum.

[1970bowtie]

i need a good grille will take 69/70 71/72 shipped to 75754 thanks

[FormerMember]

Originally Posted by vtblazer

Sure, it'd be a sweet set up but you'd need to replace the floor at a minimum.

Hmn, I wonder if those parts are available?

[Ridgeback]

If you end up parting the suburban and the hubcaps are decent I would be interested. Thanks.

[greenhorn male]

Originally Posted by nplocoman

Do the grab bag sale. These went well earlier. I think he bought prepaid boxes layed stuff out on a towel and then took a few pic's of the odds and ends and sent. Very easy! I wonder if a truckload sale would work as well

nplocoman, They are called a "Flat Rate Box" at the post office. The boxes are free just pick some up at the post office. There are two sizes 11 x 9 x 6" and 14 x 12 x 3-1/2. The latter one has a self adhesive flap so no need to tape. Priority shipping, either box is $8.95. If you add delivery confirmation, it is $0.65 extra and $1.65 extra if you add $50.00 insurance.

As you see the boxes are not big but if you send something heavy and you could fit it in the box you come out ahead. If I can't fit it in the flat rate box and it is over 3# I usually ship Fedex unless I don't want to drive that far.

The only reason I did these grab bags is I wanted to get rid of the most stuff without working too hard and the flat rate boxes made that possible, not having to measure, weigh, get shipping cost, etc.

Luis

[vtblazer]

Originally Posted by grendel

Hmn, I wonder if those parts are available?

I wonder if the complete floor kits already being made for the trucks/blazers would work?

[vtblazer]

Okay, from the top: EDITED TO INCLUDE PRICES 7/28/07
> Postal money orders only <

bean:
No step stuff around at all.

02 GMC 97 FIII:
No 'extra' short beds (do have a complete 70 4x4 project for sale though)
Have a th-350 cover - $15.00 shipped
Have a front bumper for 71/72 - $125.00 shipped
Have inners but shipping might be an issue
No rad supports for those years

Thealiean:
Have kick panels vents complete. $50.00 shipped
Have console but need to check what kind of shape it's in.
Have filler neck. $60.00 shipped
Have the jack stuff...somewhere (need to find it)
Have blazer doors but they look to be cut down truck

trkklr77
Will check for e-brake cable, have pedal for sure
No short loop cables though

Applicable pics for above reply:
1) front bumper
2/3) kick panels non A/C
4/5) blazer doors

[vtblazer]

EDITED TO INCLUDE PRICES 7/28/07

longhorn70GMC:
Have pointers, will get pics for ya. $30 shipped. (all pieces)
Have the middle belt in black only (their pulled already so I need to pair it up)

Sams68C10:
Only have one A/C dash, no parts other than the pods

michaelssmith21:
No clam shell style burb doors, sorry

jackyl9999:
Only have the 'Custom/10' emblems
*Have 'Custom/20' emblems too

Chevyman63:
Posted a pic of one bumper, have a 2nd one that's getting a little rusty
May have more inners, depending on the fate of the burb
Same goes for the front fender, if the burb gets parted then yes

grendel:
Nothing 67/68 in the yard

Chris H
Pics posted
Willing to travel towards your location so the burb can stay whole

jaros44sr:
Have another set of 3/4 ton axles if the burb stays intact. $300.00 for the pair

Few more pics.
1/2) A/C dash
3/4) emblems
5) other 3/4 ton axle pic

[jb4short]

how much for the dash?

I also need a power steering pump and bracket...mine's "Zip-Tied" to the frame

[vtblazer]

Tri-ProAutomotive:
Can take more pics but all four are the same as the one pulled out

DennyB:
These what your looking for?

hgs notes:
Thanks.

Toomany2count:
Nothing from a 68 but do have several later colunms

Pics
1/2) 5 lug rally's with rings/tires
3/4) sport mirrors
5) little 283 motor

[Thealien]

I now only need passenger side A/C vent and controls if you have

Cut down doors are OK if they have no rust, my doors are rust free but PO welded up the window frame.

Jack stuff

I am going to carlisle next weekend but could come up to pick stuff up the next week or weekend after if you/I can reach an agreement.

Thanks, I am not in a rush
Mark

[-Greg72]

Any 2WD 'Burbs for sale??? Looking for a red one, with 5-lug wheels....maybe a Panel would be cool?

What about serious question: Do you have a good quality tilt-column? I've been waiting for a Brothers Trucks backorder (about 2 months and counting)

[vtblazer]

Originally Posted by Thealien

I now only need passenger side A/C vent and controls if you have

Cut down doors are OK if they have no rust, my doors are rust free but PO welded up the window frame.

Jack stuff

I am going to carlisle next weekend but could come up to pick stuff up the next week or weekend after if you/I can reach an agreement.

Thanks, I am not in a rush
Mark

Maybe if you have a trailer you could haul some of the bigger stuff south for those that may want parts?

These blazer doors aren't rust free, not trash but far from rust 'free'

Gerg72:
No tilts, used em all already

[Thealien]

I have no trailer. I have a GMC Safari mini van. If I come to get some stuff from you I wouldn't mind bringing some stuff down here if they were to be picked up fairly quickly. I have no place for storage.

I guess I am down to just the jack stuff, maybe a filler tube, and any A/c vent parts?? which I could all fit in my motorcycle. I am still willing to help out a board member with bringing some stuff to Mass if it helps someone out?

Mark

[c-1072]

got a good blazer windshield frame or any other parts of interest for a blazer my cousin is coming up for a visit he lives near ya .are you still lookin for a short bed ? i got a driver one here might give me an excuse to come see ya .Take it easy
Todd

[hgs_notes]

I would like the black middle seat belt set and how much for those sport mirrors?

I'm also looking for a rebuildable 4 barrel carb, preferably a spreadbore. I'm not too particular on brand, as long as it is useable. Got any HEI distributors laying around? How about tranny coolers?

Mike

[DennyB]

These are the mirrors I'm looking for..

http://cgi.ebay.com/ebaymotors/ws/eB...m=120145300072

Thanks anyway.

Denny

[DennyB]

Originally Posted by hgs_notes

I would like the black middle seat belt set and how much for those sport mirrors?

I'm also looking for a rebuildable 4 barrel carb, preferably a spreadbore. I'm not too particular on brand, as long as it is useable. Got any HEI distributors laying around? How about tranny coolers?

Mike

Mike, If VT can't help you out I'm sure I can.

[Pip]

Any pics of the '70 4x4 project?

[nplocoman]

Louis, Thanks for the explanation on the flatrate boxes. I was not sure how that worked.

[vtblazer]

Originally Posted by Pip

Any pics of the '70 4x4 project?

This is the truck under cover.
http://67-72chevytrucks.com/vboard/s...d.php?t=115613

DennyB, thought those were it but wanted to let ya see what was here.

hgs notes, I have several carbs and lots of seat belts, you want black, right?

[-Greg72]

Kurt,

OK...OK....no tilt columns, then what about a set of front inner fender wells? That's a simple one, right? Maybe a salvageable factory wiring harness including fuse block???

[vtblazer]

Originally Posted by -Greg72

Kurt,

OK...OK....no tilt columns, then what about a set of front inner fender wells? That's a simple one, right? Maybe a salvageable factory wiring harness including fuse block???

Your (I believe) 3rd in line for a set of inners, wiring harness sounds doable.

When's the panel going to wanna head your way?

[rlm316]

Do you have another gear indicator for the '69-'72 non-tilt auto column. Thanks, Lane.

[vtblazer]

Originally Posted by rlm316

Do you have another gear indicator for the '69-'72 non-tilt auto column. Thanks, Lane.

Going up later today, I'll look and will get pics.