Parting '69 C20 chassis NW Missouri - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jeffspower · 08-11-2007, 12:03 PM

No commitments have been made on anything but the grille. Coast2coast, let me know if you want the bumper.

Thanks
Jeff

BAGGERSOCAL · 08-11-2007, 03:52 PM

is the frame getting tossed

my 1/2 ton frame front was tweaked and missing a section from the front
frame horns..

coast2coast · 08-11-2007, 08:31 PM

If the front bumper is back up for grabs, yes I'll take it. Will next Friday evening work for you?

corn · 08-11-2007, 08:38 PM

Im looking for a pair of 3/4 ton lower A-arms. Any idea how much shipped to NW Ia? 51058...

jeffspower · 08-12-2007, 02:47 PM

BAGGERSOCAL, I plan on chopping it up for repair parts/ scrap. Let me know where you would want me to cut it.

coast to coast, it's yours. I'm not sure If I'll be here Friday night- I'll know more later this week. I might have scored a true "church on Sunday" '76 Impala that I'll be anxious to get.

corn, I'll gladly pull them after the engine/ trans are out. I want to keep it a roller until there is nothing left to pick. Just a wild guess, I know they weigh a bit- maybe $80 shipped? I'll look them over better & see if they have much rust.

Thanks
Jeff

BAGGERSOCAL · 08-12-2007, 06:36 PM

12" back from the front Horns.

Quote:

Originally Posted by jeffspower

BAGGERSOCAL, I plan on chopping it up for repair parts/ scrap. Let me know where you would want me to cut it.

coast to coast, it's yours. I'm not sure If I'll be here Friday night- I'll know more later this week. I might have scored a true "church on Sunday" '76 Impala that I'll be anxious to get.

corn, I'll gladly pull them after the engine/ trans are out. I want to keep it a roller until there is nothing left to pick. Just a wild guess, I know they weigh a bit- maybe $80 shipped? I'll look them over better & see if they have much rust.

Thanks
Jeff

red71cheyenne · 08-12-2007, 07:31 PM

Is the clutch linkage spoken for yet? I need the push rod from pedal to z-bar, z-bar, and rod from z-bar to fork. Price plus shipping to 98311. Thanks, Jeff.

jeffspower · 08-12-2007, 08:23 PM

Quote:

Originally Posted by red71cheyenne

Is the clutch linkage spoken for yet? I need the push rod from pedal to z-bar, z-bar, and rod from z-bar to fork. Price plus shipping to 98311. Thanks, Jeff.

It's up for grabs. Complete with fork-to-frame spring. $20 + shipping, which should run about $10.

wyatt earp · 08-12-2007, 08:45 PM

jeffspower, hey i'm in need of a part you have its the clutch pivot that goes from the frame to the motor it's in the first motor pic, also the exhaust mans. if you want to seperate them from the motor? let me know, thanks.

jeffspower · 08-12-2007, 10:36 PM

Quote:

Originally Posted by wyatt earp

jeffspower, hey i'm in need of a part you have its the clutch pivot that goes from the frame to the motor it's in the first motor pic, also the exhaust mans. if you want to seperate them from the motor? let me know, thanks.

red71cheyenne has dibs on the clutch linkage. If he passes, you are next in line. RH manifold is cracked. LH might be good- I'll look it over. If it is no good, I can come up with a pair this fall. My old timer friend wants to turn some of his collection into cash. He probably has a couple dozen pairs- strung all over 2 acres

red71cheyenne · 08-12-2007, 10:56 PM

Sold!! PM me with your paypal and I'll deposit your $$$. Thanks, Jeff.

jeffspower · 08-13-2007, 10:46 PM

Left exhaust manifold is very good, right is junk.

Lower control arms look good with heavy surface rust, but not as bad as the uppers.

RicksTrucks · 08-21-2007, 11:26 PM

Looks like I may be up in the KC area this weekend. Would you cut me a deal on the seat, rear bumper and shocks - $100?

jeffspower · 08-22-2007, 09:10 PM

Quote:

Originally Posted by RicksTrucks

Looks like I may be up in the KC area this weekend. Would you cut me a deal on the seat, rear bumper and shocks - $100?

Works for me, if you want to lend a hand taking stuff off. I'll have tools here

1sik7t2 · 08-23-2007, 12:29 AM

your post says the grille is sold so i'm asking a stupid question IS IT? (iT'S STILL PICTURED THATS WHY I ASK) HOPE NOT how much if not???? thx dave

jeffspower · 08-23-2007, 08:45 PM

Quote:

Originally Posted by 1sik7t2

your post says the grille is sold so i'm asking a stupid question IS IT? (iT'S STILL PICTURED THATS WHY I ASK) HOPE NOT how much if not???? thx dave

Sorry, it's gone.

Cochise · 08-23-2007, 10:56 PM

Jeff, do you have any Chevelle projects?

jeffspower · 08-24-2007, 08:01 PM

Quote:

Originally Posted by Cochise

Jeff, do you have any Chevelle projects?

Only in my dreams

RicksTrucks · 08-24-2007, 09:57 PM

Quote:

Originally Posted by jeffspower

Works for me, if you want to lend a hand taking stuff off. I'll have tools here

Not sure if I will have the time or room to come by this weekend, but will let you know. PM me contact info just in case.

jeffspower · 08-24-2007, 10:11 PM

Quote:

Originally Posted by RicksTrucks

Not sure if I will have the time or room to come by this weekend, but will let you know. PM me contact info just in case.

Done

08-11-2007, 12:03 PM	#26
jeffspower Well, Whoop-dee-do! Join Date: Mar 2003 Location: Easton, Mo. pop.- me & scarcely a few others Posts: 2,302	Re: Parting '69 C20 chassis NW Missouri No commitments have been made on anything but the grille. Coast2coast, let me know if you want the bumper. Thanks Jeff __________________ '68 GMC shortbox 4x4 350/SM465/T221- bought it in '83 SOLD '72 K20 500 Cad/TH400/NP205 SOLD '92 Chevy 2500 6.5 mech TD 4L80E crusty daily driver '72 Monte Carlo... sweet low mile toy '11 Dodge Challenger IE 392 6spd... midlife car

08-11-2007, 03:52 PM	#27
BAGGERSOCAL Active Member Join Date: May 2007 Location: SO CAL Posts: 226	Re: Parting '69 C20 chassis NW Missouri is the frame getting tossed my 1/2 ton frame front was tweaked and missing a section from the front frame horns..

08-11-2007, 08:31 PM	#28
coast2coast Registered User Join Date: Oct 2006 Location: Strafford Missouri Posts: 217	Re: Parting '69 C20 chassis NW Missouri If the front bumper is back up for grabs, yes I'll take it. Will next Friday evening work for you?

08-11-2007, 08:38 PM	#29
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: Parting '69 C20 chassis NW Missouri Im looking for a pair of 3/4 ton lower A-arms. Any idea how much shipped to NW Ia? 51058...

08-12-2007, 02:47 PM	#30
jeffspower Well, Whoop-dee-do! Join Date: Mar 2003 Location: Easton, Mo. pop.- me & scarcely a few others Posts: 2,302	Re: Parting '69 C20 chassis NW Missouri BAGGERSOCAL, I plan on chopping it up for repair parts/ scrap. Let me know where you would want me to cut it. coast to coast, it's yours. I'm not sure If I'll be here Friday night- I'll know more later this week. I might have scored a true "church on Sunday" '76 Impala that I'll be anxious to get. corn, I'll gladly pull them after the engine/ trans are out. I want to keep it a roller until there is nothing left to pick. Just a wild guess, I know they weigh a bit- maybe $80 shipped? I'll look them over better & see if they have much rust. Thanks Jeff __________________ '68 GMC shortbox 4x4 350/SM465/T221- bought it in '83 SOLD '72 K20 500 Cad/TH400/NP205 SOLD '92 Chevy 2500 6.5 mech TD 4L80E crusty daily driver '72 Monte Carlo... sweet low mile toy '11 Dodge Challenger IE 392 6spd... midlife car

08-12-2007, 07:31 PM	#32
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: Parting '69 C20 chassis NW Missouri Is the clutch linkage spoken for yet? I need the push rod from pedal to z-bar, z-bar, and rod from z-bar to fork. Price plus shipping to 98311. Thanks, Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

08-12-2007, 08:45 PM	#34
wyatt earp Registered User Join Date: Apr 2007 Location: ohio Posts: 77	Re: Parting '69 C20 chassis NW Missouri jeffspower, hey i'm in need of a part you have its the clutch pivot that goes from the frame to the motor it's in the first motor pic, also the exhaust mans. if you want to seperate them from the motor? let me know, thanks.

08-12-2007, 10:56 PM	#36
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: Parting '69 C20 chassis NW Missouri Sold!! PM me with your paypal and I'll deposit your $$$. Thanks, Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

08-13-2007, 10:46 PM	#37
jeffspower Well, Whoop-dee-do! Join Date: Mar 2003 Location: Easton, Mo. pop.- me & scarcely a few others Posts: 2,302	Re: Parting '69 C20 chassis NW Missouri Left exhaust manifold is very good, right is junk. Lower control arms look good with heavy surface rust, but not as bad as the uppers. __________________ '68 GMC shortbox 4x4 350/SM465/T221- bought it in '83 SOLD '72 K20 500 Cad/TH400/NP205 SOLD '92 Chevy 2500 6.5 mech TD 4L80E crusty daily driver '72 Monte Carlo... sweet low mile toy '11 Dodge Challenger IE 392 6spd... midlife car

08-21-2007, 11:26 PM	#38
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	Re: Parting '69 C20 chassis NW Missouri Looks like I may be up in the KC area this weekend. Would you cut me a deal on the seat, rear bumper and shocks - $100? __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

08-23-2007, 12:29 AM	#40
1sik7t2 dave Join Date: Jul 2007 Location: el cajon Posts: 558	Re: Parting '69 C20 chassis NW Missouri your post says the grille is sold so i'm asking a stupid question IS IT? (iT'S STILL PICTURED THATS WHY I ASK) HOPE NOT how much if not???? thx dave __________________ check out my build "DIRTY BURB"

08-23-2007, 10:56 PM	#42
Cochise Junior Member Join Date: Apr 2006 Location: Rogers, AR Posts: 298	Re: Parting '69 C20 chassis NW Missouri Jeff, do you have any Chevelle projects?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.