Let's see some sbc mighty mouse motors!!!! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VDOG · 10-03-2007, 02:54 PM

Was a mighty healthy 283 until yesterday when I heard what sounded like a family of Kebler Elves with hammers in my oil pan making cookies!
Cleaning out the garage today so I have somewhere to put my new engine stand that im going to need.

**SactoJim** · 10-03-2007, 03:19 PM

Quote:

Originally Posted by nitrofn

Blown 422 the dyno said 850hp running 2 persent over. should be good for cruzing on week ends!

That think looks pretty serious!.....looks like the only mileage that thing is intended accumulate is a quarter of a mile at a time!

OldschoolJay · 10-03-2007, 03:26 PM

here's my little one, nothing special but it works pretty good.
69 307 with a cam, double roller timing,intake, 4brl, headers, hei,
\i might dres sit up a bit.

Spray-Bomb · 10-03-2007, 03:51 PM

Dang I need a newer pic !!!

350, RPM Air Gap, "RV" cam (yeah right, more like as big as one), think it has flat tops

Don't really know what all is in it, cuz my brother built it & he doesn't remember either
It runs ok, but I plan to build something different some day

Ole Blue 68 · 10-03-2007, 05:31 PM

Quote:

Originally Posted by Sinister

nitrofn, that's totally sick...

Welcome to the board nitrofn. Let us know when this monster is rolling.

swb85 · 10-03-2007, 05:34 PM

1969 L48 stroked to 383ci, scat crank/rods, ARP everywhere, vortec heads, rpm air gap, comp roller cam/rockers, 10.4:1 compression, ~450hp/475tq......runs on 91 octane all day.

If ya wanna see/hear it run: http://s85.photobucket.com/albums/k5...nt=383idle.flv

Sinister · 10-03-2007, 06:20 PM

swb85, very nice motor...

fastom · 10-03-2007, 06:34 PM

Heres mine, GM ZZ383. Demon carb, Sanderson headers, March serpentine system.

57sailplane · 10-03-2007, 07:24 PM

hey nitrofn,

that thing is awsome..

would you mind tellin me what mid and front plate you using for engine mounts...

nitrofn · 10-03-2007, 08:18 PM

the front plate is from competition enginering and mid plate i made. The motor is all lunati parts. It is going to the painter this week Viper red with 3 small scalops on each side. I have given it the name! The truck from Hell.Hope to be on the street around xmas. This truck has really tried me.

C10-Driver · 10-03-2007, 08:40 PM

Here is mine...

355 Small Block Chevy
Edelbrock Performer RPM aluminium heads
Performer RPM cam with full roller rockers
Endurashine Performer RPM intake
Holley 670cfm Street Avenger carb
March Performance Serpentine pulleys & brackets
Edelbrock Ceramic Coated Headers & 2-1/2” Dual Exhaust

Name: 2007_0407_70-C10_Chassis0002.jpg
Views: 1436
Size: 66.0 KB

Name: 2007_0407_70-C10_Chassis0002.jpg
Views: 1436
Size: 66.0 KB

Name: 2007_0407_70-C10_Chassis0011.jpg
Views: 1112
Size: 67.7 KB

Name: 2007_0923_70-C10_Driveway0009.jpg
Views: 623
Size: 65.6 KB

Name: 2007_0923_70-C10_Pandosy0029.jpg
Views: 606
Size: 63.0 KB

jorgensensc · 10-03-2007, 08:43 PM

Simple 350 with 327 heads. Has a little rumble so I think it has a cam. I took it apart and painted it up, resealed it, put a 600cfm edelbrock and performer intake on it (had a stock 2 barrel intake and carb, but still ran awesome!!) Getting ready to refire it up again tomorrow!!

bryanw1968 · 10-03-2007, 08:54 PM

Quote:

Originally Posted by jorgensensc

Simple 350 with 327 heads. Has a little rumble so I think it has a cam. I took it apart and painted it up, resealed it, put a 600cfm edelbrock and performer intake on it (had a stock 2 barrel intake and carb, but still ran awesome!!) Getting ready to refire it up again tomorrow!!

THAT is the coolest motor I've seen so far my friend.

jott_06 · 10-03-2007, 08:58 PM

heres the 350 in my 68 GMC and the 355 in my 86 Camaro.

jorgensensc · 10-03-2007, 09:07 PM

Quote:

Originally Posted by bryanw1968

THAT is the coolest motor I've seen so far my friend.

THank you very much. I know it doesn't compare to some of these high doller beauties here, but I was going for the clean understated look. It will go well with the Hot Rodz Flat Black that the truck will be painted. Again, Thank you for the compliment!
Shawn

Zumo · 10-03-2007, 10:51 PM

These are all some nice motors. Here's mines.

Ole Blue 68 · 10-04-2007, 04:31 PM

My eyesight must be going...I don't see a water neck on your engine. Am I missing something?

70rs/ss · 10-04-2007, 05:36 PM

Shawn,

That looks a little bit better than when I gave it to you!! Well, maybe a little bit better than a little bit!! It's amazing what a spray bomb rebuild can do for an engine!!

70GMCer · 10-04-2007, 05:36 PM

There's a lot of spent pay checks on here.........

jeffnohio · 10-04-2007, 06:06 PM

lol No Kidding ^ What he said lol ...

Here is mine in my 83 SWB .. 350/700r4 mild cam

69halfton · 10-04-2007, 06:06 PM

350 sbc bored .60 over, and 400 crank (383 stroker, which works out to about 391 ci) Edel. Air Gap intake, demon 750 double pumper, aluminum heads, headers, Rolloer cam & rockers.

not bad for a 16 year old

Spray-Bomb · 10-04-2007, 06:13 PM

Quote:

Originally Posted by Ole Blue 68

My eyesight must be going...I don't see a water neck on your engine. Am I missing something?

It's an old pic of when I had just got it in the truck

ND_guy · 10-04-2007, 06:34 PM

Zumo, I love your wheels!

Homeboy · 10-04-2007, 11:39 PM

Mine

Ole Blue 68 · 10-05-2007, 10:41 AM

Quote:

Originally Posted by Spray-Bomb

It's an old pic of when I had just got it in the truck

Ahhh, I thought I was missing something...

I just checked out your build thread and it makes sense now.

10-03-2007, 02:54 PM	#26
VDOG Grand PooBaa Member Join Date: Jan 2001 Location: LA, CA Posts: 5,302	Re: Let's see some sbc mighty mouse motors!!!! Was a mighty healthy 283 until yesterday when I heard what sounded like a family of Kebler Elves with hammers in my oil pan making cookies! Cleaning out the garage today so I have somewhere to put my new engine stand that im going to need. Attached Images

10-03-2007, 03:26 PM	#28
OldschoolJay Registered User Join Date: Dec 2006 Location: victoria bc canada Posts: 60	Re: Let's see some sbc mighty mouse motors!!!! here's my little one, nothing special but it works pretty good. 69 307 with a cam, double roller timing,intake, 4brl, headers, hei, \i might dres sit up a bit. __________________ 1950 dodge truck 1970 gmc custom 1972 toyota celica 1974 toyota corolla

10-03-2007, 03:51 PM	#29
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Let's see some sbc mighty mouse motors!!!! Dang I need a newer pic !!! 350, RPM Air Gap, "RV" cam (yeah right, more like as big as one), think it has flat tops Don't really know what all is in it, cuz my brother built it & he doesn't remember either It runs ok, but I plan to build something different some day __________________ Just not low enough... ----------------------------- Sinister Killer Last edited by Spray-Bomb; 10-03-2007 at 03:51 PM.

10-03-2007, 05:34 PM	#31
swb85 On a budget like Fred Sanford Join Date: Oct 2005 Location: Topeka, KS Posts: 2,031	Re: Let's see some sbc mighty mouse motors!!!! 1969 L48 stroked to 383ci, scat crank/rods, ARP everywhere, vortec heads, rpm air gap, comp roller cam/rockers, 10.4:1 compression, ~450hp/475tq......runs on 91 octane all day. If ya wanna see/hear it run: http://s85.photobucket.com/albums/k5...nt=383idle.flv __________________ '85 Silverado swb: 383 stroker, 10.5:1, vortec heads, 232/238 roller cam, RPM air gap, performer 750 carb, stainless longtubes, 3" duals/super 44's, T56/4.11 383ci build / exterior refresh thread '98 Camaro z28: 370ci twin turbo 370ci build '01 Tahoe LT 4x4: 5.3, longtubes/ory, magnaflow duals, custom tune....wife's DD Last edited by swb85; 10-04-2007 at 05:00 PM.

10-03-2007, 06:20 PM	#32
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Re: Let's see some sbc mighty mouse motors!!!! swb85, very nice motor... __________________ Beat it to fit, Paint it to match...

10-03-2007, 06:34 PM	#33
fastom That's right, it's Copper!! Join Date: May 2007 Location: Bakersfield, Central California Posts: 558	Re: Let's see some sbc mighty mouse motors!!!! Heres mine, GM ZZ383. Demon carb, Sanderson headers, March serpentine system. Attached Images Last edited by fastom; 10-05-2007 at 12:49 AM.

10-03-2007, 07:24 PM	#34
57sailplane Senior Member Join Date: Mar 2004 Location: Nebraska Posts: 583	Re: Let's see some sbc mighty mouse motors!!!! hey nitrofn, that thing is awsome.. would you mind tellin me what mid and front plate you using for engine mounts...

10-03-2007, 08:18 PM	#35
nitrofn Registered User Join Date: May 2006 Location: Santa Fe Posts: 42	Re: Let's see some sbc mighty mouse motors!!!! the front plate is from competition enginering and mid plate i made. The motor is all lunati parts. It is going to the painter this week Viper red with 3 small scalops on each side. I have given it the name! The truck from Hell.Hope to be on the street around xmas. This truck has really tried me.

10-03-2007, 08:40 PM	#36
C10-Driver Chevy Truck Addict Join Date: Aug 2006 Location: Kelowna, BC Posts: 1,176	Re: Let's see some sbc mighty mouse motors!!!! Here is mine... 355 Small Block Chevy Edelbrock Performer RPM aluminium heads Performer RPM cam with full roller rockers Endurashine Performer RPM intake Holley 670cfm Street Avenger carb March Performance Serpentine pulleys & brackets Edelbrock Ceramic Coated Headers & 2-1/2” Dual Exhaust __________________ . 1970 Chev C/10 SWB, 355 SBC, 700R4, 3.73 Posi, Air Ride (Click to view Build Thread) (SOLD) 1978 Chevy C/10 SWB 1970 Pontiac Lemans .

10-03-2007, 08:43 PM	#37
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: Let's see some sbc mighty mouse motors!!!! Simple 350 with 327 heads. Has a little rumble so I think it has a cam. I took it apart and painted it up, resealed it, put a 600cfm edelbrock and performer intake on it (had a stock 2 barrel intake and carb, but still ran awesome!!) Getting ready to refire it up again tomorrow!! __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

10-03-2007, 08:58 PM	#39
jott_06 Camaro Club Join Date: Jun 2007 Location: ohio Posts: 472	Re: Let's see some sbc mighty mouse motors!!!! heres the 350 in my 68 GMC and the 355 in my 86 Camaro. Attached Images

10-03-2007, 10:51 PM	#41
Zumo Hot Rods For Life Join Date: Sep 2001 Location: Waxahachie, TX Posts: 3,305	Re: Let's see some sbc mighty mouse motors!!!! These are all some nice motors. Here's mines. Attached Images __________________ 1968 C10 LWB **SOLD* Andy Viva Los Bicicletas! Los Muertos Custom Bicycles

10-04-2007, 04:31 PM	#42
Ole Blue 68 Registered User Join Date: Aug 2005 Location: Philly Posts: 1,140	Hey Spray Bomb My eyesight must be going...I don't see a water neck on your engine. Am I missing something?

10-04-2007, 05:36 PM	#43
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,271	Re: Let's see some sbc mighty mouse motors!!!! Shawn, That looks a little bit better than when I gave it to you!! Well, maybe a little bit better than a little bit!! It's amazing what a spray bomb rebuild can do for an engine!!

10-04-2007, 05:36 PM	#44
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Let's see some sbc mighty mouse motors!!!! There's a lot of spent pay checks on here......... __________________ 1997 GMC Sierra Ext 1965 Mustang



Register or Log In To remove these advertisements.

10-04-2007, 06:06 PM	#45
jeffnohio Registered User Join Date: Oct 2007 Location: NW Ohio Posts: 58	Re: Let's see some sbc mighty mouse motors!!!! lol No Kidding ^ What he said lol ... Here is mine in my 83 SWB .. 350/700r4 mild cam __________________ Jeff 1967 GMC 3/4ton LWB, Orginal Straight 6, 4 on the floor Project truck

10-04-2007, 06:06 PM	#46
69halfton Registered User Join Date: Apr 2007 Location: King City, Ontario, Canada Posts: 974	Re: Let's see some sbc mighty mouse motors!!!! 350 sbc bored .60 over, and 400 crank (383 stroker, which works out to about 391 ci) Edel. Air Gap intake, demon 750 double pumper, aluminum heads, headers, Rolloer cam & rockers. not bad for a 16 year old Attached Images __________________ - Jason If you can turn, Youre not going fast enough. Favorite caption: first car to 200 mph in the 1/4 mile, no parachute, drum brakes all the way around.. ..back when men were men.

10-04-2007, 06:34 PM	#48
ND_guy Tool Addiction=Money Shortage Join Date: Mar 2006 Location: Grand Forks, ND Posts: 233	Re: Let's see some sbc mighty mouse motors!!!! Zumo, I love your wheels! __________________ 1967 K20 400TBI SM465/NP205 posi front, Detroit locker 4.56 rear

10-04-2007, 11:39 PM	#49
Homeboy Registered User Join Date: Feb 2002 Location: Canyon, Tx. Posts: 62	Re: Let's see some sbc mighty mouse motors!!!! Mine Attached Images __________________ "Where would we be without the agitators of the world attaching the electrodes of knowledge to the nipples of ignorance?"

Register or Log In To remove these advertisements.