Bucket seats and shoulder belts - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**leddzepp** · 08-07-2009, 11:16 PM

Jeff- I have both styles that are pictured in this thread. I got a set of the "rubber" ones like jay_shy has from ClassicBowties (Mel). He told me that he had seen this style in several Blazers. I also have the ones that Blazerman posted that are black and hard plastic.

This is good info! Now I can finally install these things

**71blksuper4x4** · 08-07-2009, 11:40 PM

thanks Jeff, I forgot to look tonight. Thanks again for everything. Trevor

**71blksuper4x4** · 08-26-2009, 03:02 PM

To add to this, I believe the rubber ones to be correct for someone with utility buckets in a blazer. They should mount to the side of the brackets somewhere just below the upholstery on the side where there would normally be a console in a regular bucket seat truck. A side note for someone needing rubber ones, is that they were put in vans of the same vintage and early 73+ style vans. I have a medium blue set out of a van. This is why I come to the conclusion these would be perfect for holding the female end to the utility bucket blazers out there and should be considered correct for them. The black plastic style, should be considered to be correct for trucks and in a rare case, blazers with shoulder harnesses and bucket/console combos. Trevor

BLAZERMAN · 08-26-2009, 07:19 PM

I still believe there is another retainer that is correct for these trucks..I've seen a pic of them but never actually found any. I did once see an article in a Truckin magazine that mentioned them as being very rare because they broke very easily. I think the ones shown that were sold as an accessory for the cars are about as close as you can get but still not correct.
The rubber kind are probably the most durable as they are molded in colors matching the interior color.

08-07-2009, 11:16 PM	#26
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: Bucket seats and shoulder belts Jeff- I have both styles that are pictured in this thread. I got a set of the "rubber" ones like jay_shy has from ClassicBowties (Mel). He told me that he had seen this style in several Blazers. I also have the ones that Blazerman posted that are black and hard plastic. This is good info! Now I can finally install these things __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

08-07-2009, 11:40 PM	#27
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Bucket seats and shoulder belts thanks Jeff, I forgot to look tonight. Thanks again for everything. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

08-26-2009, 03:02 PM	#28
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Bucket seats and shoulder belts To add to this, I believe the rubber ones to be correct for someone with utility buckets in a blazer. They should mount to the side of the brackets somewhere just below the upholstery on the side where there would normally be a console in a regular bucket seat truck. A side note for someone needing rubber ones, is that they were put in vans of the same vintage and early 73+ style vans. I have a medium blue set out of a van. This is why I come to the conclusion these would be perfect for holding the female end to the utility bucket blazers out there and should be considered correct for them. The black plastic style, should be considered to be correct for trucks and in a rare case, blazers with shoulder harnesses and bucket/console combos. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

08-26-2009, 07:19 PM	#29
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	Re: Bucket seats and shoulder belts I still believe there is another retainer that is correct for these trucks..I've seen a pic of them but never actually found any. I did once see an article in a Truckin magazine that mentioned them as being very rare because they broke very easily. I think the ones shown that were sold as an accessory for the cars are about as close as you can get but still not correct. The rubber kind are probably the most durable as they are molded in colors matching the interior color. __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.