LMC? Anyone ever have issues? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ProjectDD** · 02-01-2008, 11:39 AM

Wow, thanks for the replies. It was an "out of curiosity question." Shoulda searched 1st so my bad on that one. I will browse the vendors on this site and see what they have. Thanks for the replies

**jaros44sr** · 02-01-2008, 11:52 AM

Quote:

Originally Posted by ProjectDD

Would anyone here think 2x about buying any part from them? Fitment issues with grills, hoods, fenders, etc.. Seems like the parts are priced fair, didn't know if it's because they cheaped on making them.

Would just appreciate some thoughts or maybe experiences with them, thanks

You have a major manufactorer of sheet metal parts in your backyard so to speak. Call Jon at Tri-Pro their parts are licensed by GM. Shipping is a lot closer than the left coast. I use his parts without issue, period

duane67c-10 · 02-01-2008, 07:22 PM

I've got alot or interior things from them, you can tell its repro but its not bad stuf, everything I got fit good. No problems with them here.

Old Chevy Mech · 02-01-2008, 08:43 PM

Quote:

Originally Posted by PanelDeland

ProjectDD,Just so you have some options,I would suggest you check the vendors that support the BB.Most will have comparable pricing,much better customer service and all of them build trucks also.This means they use what they sell and will probably sell only the best fitting highest quality parts available.On top of all that they have been vetted by the BB members as good honest dealers.There are reveiws boards to look thru.One other consideration is location,especially on larger orders one of the vendors here may be close enough that you can pick up your order and save shipping.
Just food for thought.

I can say that since joining this BB I will definately use the site vendors out of loyality over LMC. I absolutely dispise someone who sells something and is clueless about it, and on top of that disrespects the installer...us.

Frank

c10addict · 02-01-2008, 10:04 PM

I have spent a ton with LMC.... If you do not have your part numbers dont call.. They sell the same repop stuff as others so you really can not blame them for fit and finish issues.. Their shipping is a little higher than most but their return policy is AWESOME... They never even want the damaged parts back... They sent me 3 tailgates before I received one that wasn't dented and never wanted the other two back... The ones I received were minor dings but when you buy new you do not want any damage.. Just had to hold them to show UPS if questioned then you can dispose of them... right into the rafters they went! Its nice though because you do not have to wait for them to receive your old part before shipping your new part...

Wrenchbender Ret · 02-02-2008, 01:01 AM

They don,t just drop ship. They have a huge warehouse. Everything I have bought in the last 20 years from them has been in the warehouse. Their people aren,t knowledgeable about parts or the catalogs.

Sinister · 02-02-2008, 01:44 AM

i've ordered a bunch of stuff from them. Fit and finish has been good. Quick shipping. I ordered a windshield wiper switch and it was DOA. They sent another and didn't want the other one back...

jgrh64 · 02-02-2008, 02:00 AM

Back when I had my 64 I ordered a few items from them most were fine ( I knew I wasn't paying gold prices so I didn't expect show quality ) The windshield washer pump was wrong but fits my 70 and the door checks needed to be combined with my old ones to work properly but you gotta figure Long Motor Company sounds chinese to me ,if you want top parts go elsewhere if it's a driver use them.

tcb-1 · 02-02-2008, 03:14 AM

I can just run over there to get parts since it's only a few miles from my house.

Word to the wise:
Do not ask anyone there about technical issues. Most are not truck people, they are simply employees who pull parts. Lately, they have had a new person behind the desk everytime I go there.

And their credit dept.....I had an issue with a credit, and it finally took me calling and screaming to get my money back.

As a previous posted mention, most parts houses get their parts from the same place, and unfortunately it's China.

**ProjectDD** · 02-02-2008, 07:31 AM

Thanks, I'm not building a show truck by no means, but would like some nice original parts. The interior will be mostly stock looking parts with exception of the seats. I will tuck and roll them. That and a few minor exterior parts like chrome and grills. Other then that if the old original part is bad or rusted I'll make something of repair it.

02-01-2008, 11:39 AM	#26
ProjectDD Paint, Body & Metalworker Join Date: Jan 2008 Location: Airville, PA Posts: 35	Re: LMC? Anyone ever have issues? Wow, thanks for the replies. It was an "out of curiosity question." Shoulda searched 1st so my bad on that one. I will browse the vendors on this site and see what they have. Thanks for the replies

02-01-2008, 07:22 PM	#28
duane67c-10 Registered User Join Date: Oct 2007 Location: fairview tennessee Posts: 122	Re: LMC? Anyone ever have issues? I've got alot or interior things from them, you can tell its repro but its not bad stuf, everything I got fit good. No problems with them here.

02-01-2008, 10:04 PM	#30
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: LMC? Anyone ever have issues? I have spent a ton with LMC.... If you do not have your part numbers dont call.. They sell the same repop stuff as others so you really can not blame them for fit and finish issues.. Their shipping is a little higher than most but their return policy is AWESOME... They never even want the damaged parts back... They sent me 3 tailgates before I received one that wasn't dented and never wanted the other two back... The ones I received were minor dings but when you buy new you do not want any damage.. Just had to hold them to show UPS if questioned then you can dispose of them... right into the rafters they went! Its nice though because you do not have to wait for them to receive your old part before shipping your new part... __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

02-02-2008, 01:01 AM	#31
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,229	Re: LMC? Anyone ever have issues? They don,t just drop ship. They have a huge warehouse. Everything I have bought in the last 20 years from them has been in the warehouse. Their people aren,t knowledgeable about parts or the catalogs.

02-02-2008, 01:44 AM	#32
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Re: LMC? Anyone ever have issues? i've ordered a bunch of stuff from them. Fit and finish has been good. Quick shipping. I ordered a windshield wiper switch and it was DOA. They sent another and didn't want the other one back... __________________ Beat it to fit, Paint it to match...

02-02-2008, 02:00 AM	#33
jgrh64 Prestige member Old Farts Club Join Date: Nov 2005 Location: Cleveland Posts: 502	Re: LMC? Anyone ever have issues? Back when I had my 64 I ordered a few items from them most were fine ( I knew I wasn't paying gold prices so I didn't expect show quality ) The windshield washer pump was wrong but fits my 70 and the door checks needed to be combined with my old ones to work properly but you gotta figure Long Motor Company sounds chinese to me ,if you want top parts go elsewhere if it's a driver use them. __________________ Hey sombodys gotta do it!

02-02-2008, 03:14 AM	#34
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: LMC? Anyone ever have issues? I can just run over there to get parts since it's only a few miles from my house. Word to the wise: Do not ask anyone there about technical issues. Most are not truck people, they are simply employees who pull parts. Lately, they have had a new person behind the desk everytime I go there. And their credit dept.....I had an issue with a credit, and it finally took me calling and screaming to get my money back. As a previous posted mention, most parts houses get their parts from the same place, and unfortunately it's China. __________________ Doug THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten". The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson

02-02-2008, 07:31 AM	#35
ProjectDD Paint, Body & Metalworker Join Date: Jan 2008 Location: Airville, PA Posts: 35	Re: LMC? Anyone ever have issues? Thanks, I'm not building a show truck by no means, but would like some nice original parts. The interior will be mostly stock looking parts with exception of the seats. I will tuck and roll them. That and a few minor exterior parts like chrome and grills. Other then that if the old original part is bad or rusted I'll make something of repair it.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.