71 3/4 C20 chevy just in - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 03-24-2008, 05:42 AM

Mike, didn't take the bumper off it, tailgate was junk. I got a 72 and 71 coming in, I think the bumpers are good on them, $25 for a bumper I have a couple driver quality tailgates here, $30 for one $40 for one $70 for another.
Ernest, yes there is a difference the frame bracket is like a Big block, and the rod is a little longer I think.
Thanks Randy

tkmad · 03-24-2008, 07:38 AM

Will the PS box fit a '67 C20?

michael573 · 03-24-2008, 04:11 PM

sounds good. i was thinking about driving your way on april 5th, are you going to be around? also do you have any windshields? thanks,mike

teeitup · 03-24-2008, 05:14 PM

tkmad, it would but you'd have to dimple the frame on a 67. Thats what everyone has to do to put PS on 67's. GM didn't dimple the frame till 68
Mike, I think I have a good one in this truck I've got coming in, I can look when it gets here. I could cut the rubber when you here and take it out, I get $50 for windshields. As of now I don't have any plans for the the 5th but I need to check with my wife

Thanks Randy

ImLewie · 03-24-2008, 06:25 PM

AT linkage $25 plus shipping

Do you still have the At linkage??

teeitup · 03-24-2008, 06:36 PM

Sorry sold the setup off this awhile back. I have another truck coming in this week hopefully, I think it has the setup on it. Thanks Randy

ImLewie · 03-24-2008, 08:25 PM

Did you save any of the body trim

teeitup · 03-25-2008, 01:07 AM

I've got some body trim off alot of different trucks here, no clips though, what all are you needing? Thanks Randy

teeitup · 03-25-2008, 02:31 AM

I just bought another truck a couple minutes ago, it should have the linkage on it, it will be here late tomorrow night, I can check it out on Tues after work. Thanks Randy

michael573 · 03-25-2008, 03:13 AM

randy i sent you a pm. thanks,mike

teeitup · 03-25-2008, 04:31 AM

Mike, the 5th should work, I'll have 2 other trucks here by then for sure. Thanks Randy

68C10HotRod · 03-25-2008, 08:08 AM

Quote:

Originally Posted by teeitup

I've got some body trim off alot of different trucks here, no clips though, what all are you needing? Thanks Randy

Randy,

Would be interested in some clean LWB Upper Moldings if you have a pair. Could also use all 4 Woodgrain Wide Lower Molding for front fenders. Shoot me a price & shipping to 68134. LMK if there's a chance for a set of 3/4T Lower Control Arms somewhere along the way.

Thanks!!

teeitup · 03-25-2008, 04:25 PM

I'll look and see what I have it will be Tuesday evening, Thanks Randy

Fishwacker · 03-26-2008, 04:02 AM

Quote:

Originally Posted by teeitup

$20 plus shipping, I think it will fit in a USPS priority flat rate box, if it does it would be $9 shipping. Thanks let me know, Randy

Hey Randy, if the carb is off the truck can you check the I.D. number on the drivers side and let me know. I just want to make sure it hasn't been changed out to something much later & smoggy/detuned. Plus or minus 1-2 years will work, but the mid to late 70's had some really weird stuff done to these carbs that can be worked around but I prefer the earlier ones. Thanks.

teeitup · 03-26-2008, 07:55 AM

I'll try to get it Tues, I just got a 71 in that has a 4 barrell on it, I hauled in another 71 tonight not sure what it has on it, and I just bought a 72 that I'll probably get in this week sometime, surely one of them has the right one on it. Thanks Randy

stonewall618 · 03-26-2008, 08:41 AM

what engine is that... is the intake and carb... is it a 4 barl? if yes is it still good...if so how much +shipping?

teeitup · 03-26-2008, 09:05 AM

I took the carb off this motor before it went to scrap, I didn't save the intake, sorry. Thanks Randy

stonewall618 · 03-26-2008, 09:07 AM

DAMN!!... what carb is it?? or did you sell it?

teeitup · 03-26-2008, 09:13 AM

Fishwacker is first on the carb, I need to get some numbers off it for him. You'd be next in line. Thanks Randy

teeitup · 03-28-2008, 02:37 AM

carb number 7041208 DN 0571. Fishwacker is first then Stonewall. Thanks Randy

ZOOMY · 03-28-2008, 05:04 AM

-Randy, If you have someody headed north, I'll take the differential..............Zoomy

teeitup · 03-28-2008, 05:27 AM

Dave, I sold it already sorry. I'm getting in a 72 3/4 2wd hopefully this week. Its a running truck though, I may try to sell it complete first for $1100. Sorry I don't know anyone headed that way right now. Are you needing a 71 cheyenne cab or a good bed, I just got a pretty decent truck in with a original wood bed, still has paint on the floor, cab has been fixed once, needs a couple mounts fixed. Thanks Randy

Fishwacker · 03-30-2008, 07:58 AM

Quote:

Originally Posted by teeitup

carb number 7041208 DN 0571. Fishwacker is first then Stonewall. Thanks Randy

I sent a PM your way. Let me know so I can send payment. Thanks, Gary S.

Longhorn Man · 03-30-2008, 01:53 PM

uhhh, guys...

Quote:

Originally Posted by teeitup

Sorry its already gone to scrap, Thanks Randy

teeitup · 03-30-2008, 04:17 PM

Fishwacker, Gary, I sent a pm to you for total. I'll send another now. Thanks Randy

03-24-2008, 05:42 AM	#26
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 71 3/4 C20 chevy just in Mike, didn't take the bumper off it, tailgate was junk. I got a 72 and 71 coming in, I think the bumpers are good on them, $25 for a bumper I have a couple driver quality tailgates here, $30 for one $40 for one $70 for another. Ernest, yes there is a difference the frame bracket is like a Big block, and the rod is a little longer I think. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-24-2008, 07:38 AM	#27
tkmad Registered User Join Date: Mar 2008 Location: Thousand Oaks Ca Posts: 51	Re: 71 3/4 C20 chevy just in Will the PS box fit a '67 C20?

03-24-2008, 04:11 PM	#28
michael573 Registered User Join Date: Nov 2007 Location: kingdom city,mo Posts: 38	Re: 71 3/4 C20 chevy just in sounds good. i was thinking about driving your way on april 5th, are you going to be around? also do you have any windshields? thanks,mike

03-24-2008, 05:14 PM	#29
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 71 3/4 C20 chevy just in tkmad, it would but you'd have to dimple the frame on a 67. Thats what everyone has to do to put PS on 67's. GM didn't dimple the frame till 68 Mike, I think I have a good one in this truck I've got coming in, I can look when it gets here. I could cut the rubber when you here and take it out, I get $50 for windshields. As of now I don't have any plans for the the 5th but I need to check with my wife Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-24-2008, 06:25 PM	#30
ImLewie Registered User Join Date: Apr 2007 Location: South Deerfield Ma Posts: 4	Re: 71 3/4 C20 chevy just in AT linkage $25 plus shipping Do you still have the At linkage??

03-24-2008, 06:36 PM	#31
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 71 3/4 C20 chevy just in Sorry sold the setup off this awhile back. I have another truck coming in this week hopefully, I think it has the setup on it. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-24-2008, 08:25 PM	#32
ImLewie Registered User Join Date: Apr 2007 Location: South Deerfield Ma Posts: 4	Re: 71 3/4 C20 chevy just in Did you save any of the body trim

03-25-2008, 01:07 AM	#33
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 71 3/4 C20 chevy just in I've got some body trim off alot of different trucks here, no clips though, what all are you needing? Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-25-2008, 02:31 AM	#34
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 71 3/4 C20 chevy just in I just bought another truck a couple minutes ago, it should have the linkage on it, it will be here late tomorrow night, I can check it out on Tues after work. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-25-2008, 03:13 AM	#35
michael573 Registered User Join Date: Nov 2007 Location: kingdom city,mo Posts: 38	Re: 71 3/4 C20 chevy just in randy i sent you a pm. thanks,mike

03-25-2008, 04:31 AM	#36
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 71 3/4 C20 chevy just in Mike, the 5th should work, I'll have 2 other trucks here by then for sure. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-25-2008, 04:25 PM	#38
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 71 3/4 C20 chevy just in I'll look and see what I have it will be Tuesday evening, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-26-2008, 07:55 AM	#40
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 71 3/4 C20 chevy just in I'll try to get it Tues, I just got a 71 in that has a 4 barrell on it, I hauled in another 71 tonight not sure what it has on it, and I just bought a 72 that I'll probably get in this week sometime, surely one of them has the right one on it. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-26-2008, 08:41 AM	#41
stonewall618 Just loves his truck. Join Date: Jan 2008 Location: cleburne, TX Posts: 263	Re: 71 3/4 C20 chevy just in what engine is that... is the intake and carb... is it a 4 barl? if yes is it still good...if so how much +shipping? __________________ Gold 1969 c10 LWB--350 gm crate motor 30"muds on the back...with aluminum rims with black and red Chevy bowtie center caps that look awesome! EAGLE SCOUT FTW!!!

03-26-2008, 09:05 AM	#42
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 71 3/4 C20 chevy just in I took the carb off this motor before it went to scrap, I didn't save the intake, sorry. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

03-26-2008, 09:07 AM	#43
stonewall618 Just loves his truck. Join Date: Jan 2008 Location: cleburne, TX Posts: 263	Re: 71 3/4 C20 chevy just in DAMN!!... what carb is it?? or did you sell it? __________________ Gold 1969 c10 LWB--350 gm crate motor 30"muds on the back...with aluminum rims with black and red Chevy bowtie center caps that look awesome! EAGLE SCOUT FTW!!!

03-26-2008, 09:13 AM	#44
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 71 3/4 C20 chevy just in Fishwacker is first on the carb, I need to get some numbers off it for him. You'd be next in line. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-28-2008, 02:37 AM	#45
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 71 3/4 C20 chevy just in carb number 7041208 DN 0571. Fishwacker is first then Stonewall. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-28-2008, 05:04 AM	#46
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	Re: 71 3/4 C20 chevy just in -Randy, If you have someody headed north, I'll take the differential..............Zoomy

03-28-2008, 05:27 AM	#47
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 71 3/4 C20 chevy just in Dave, I sold it already sorry. I'm getting in a 72 3/4 2wd hopefully this week. Its a running truck though, I may try to sell it complete first for $1100. Sorry I don't know anyone headed that way right now. Are you needing a 71 cheyenne cab or a good bed, I just got a pretty decent truck in with a original wood bed, still has paint on the floor, cab has been fixed once, needs a couple mounts fixed. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 03-28-2008 at 05:30 AM.

03-30-2008, 04:17 PM	#50
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 71 3/4 C20 chevy just in Fishwacker, Gary, I sent a pm to you for total. I'll send another now. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.