Suspension Parts FS AZ - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70rs/ss · 02-28-2008, 01:23 AM

Rear springs?? Will I need a notch?? I was thinking 4" was the max without a cut out? Conversion kit with spindle? ($750?)LMK

clean71 · 02-28-2008, 02:52 AM

You won't need a notch with these springs. I have -5 or -6 on my 2wd Jimmy and I don't hit unless I hit something pretty hard. Just have to trim the bumpstops a bit I believe.

Power Disc Conversion kit w/ 2.5 drop spindles is $750 shipped.

kantista · 02-28-2008, 03:14 AM

Clean71,
I will take the panard bar.

kantista · 02-28-2008, 03:18 AM

Clean71,
I forgot to ask if you still had the rear lowering springs. If so how much drop are they, and how much $$.
Thanks,
Keith

clean71 · 03-05-2008, 09:04 PM

I know someone needs this front disc conversion kit and front drop springs. Make me an offer. This stuff needs to go. Thanks.

chevys2die4 · 03-05-2008, 10:32 PM

are they drop spindles to? I wanted to convert to 5 lug, but? what is your bottom dollar on kit wsprings?

clean71 · 03-05-2008, 11:05 PM

Yep, they're 2.5 in drop spindles. Make me an offer. I won't be offended if it's too low. I'll just let you know. You can see what I paid for them. I know there are other kits ranging from about $500 to what I paid. I know I'm going to take a loss and I'd rather have someone use them than have them sitting in storage for the next 3 years. The benefit here is that they are made specifically for our trucks and will be a bolt-on affair. Let me know.

AZRATTLER · 03-10-2008, 11:15 AM

do you still have the rear drop springs?

clean71 · 03-11-2008, 01:37 AM

Everything is sold except the front power disc drop conversion kit and the firewall insulators. Thanks.

chevys2die4 · 03-11-2008, 04:43 AM

PM Sent

Riveted1 · 03-11-2008, 05:39 AM

Do you still have the disc brake kit? If so, I'll take it pending agreement on a price.

clean71 · 03-19-2008, 06:51 AM

Updated prices.

02-28-2008, 01:23 AM	#26
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,271	Re: Suspension Parts FS AZ Rear springs?? Will I need a notch?? I was thinking 4" was the max without a cut out? Conversion kit with spindle? ($750?)LMK

02-28-2008, 02:52 AM	#27
clean71 Registered User Join Date: Aug 2002 Location: San Diego, CA Posts: 335	Re: Suspension Parts FS AZ You won't need a notch with these springs. I have -5 or -6 on my 2wd Jimmy and I don't hit unless I hit something pretty hard. Just have to trim the bumpstops a bit I believe. Power Disc Conversion kit w/ 2.5 drop spindles is $750 shipped. __________________ CPO U.S. Navy(Ret) 1972 GMC Jimmy 4x4 Custom 1972 GMC Jimmy 2x4 Custom

02-28-2008, 03:14 AM	#28
kantista Registered User Join Date: Jan 2008 Location: Austin, Tx Posts: 18	Re: Suspension Parts FS AZ Clean71, I will take the panard bar.

02-28-2008, 03:18 AM	#29
kantista Registered User Join Date: Jan 2008 Location: Austin, Tx Posts: 18	Re: Suspension Parts FS AZ Clean71, I forgot to ask if you still had the rear lowering springs. If so how much drop are they, and how much $$. Thanks, Keith

03-05-2008, 09:04 PM	#30
clean71 Registered User Join Date: Aug 2002 Location: San Diego, CA Posts: 335	Re: Suspension Parts FS AZ I know someone needs this front disc conversion kit and front drop springs. Make me an offer. This stuff needs to go. Thanks. __________________ CPO U.S. Navy(Ret) 1972 GMC Jimmy 4x4 Custom 1972 GMC Jimmy 2x4 Custom

03-05-2008, 10:32 PM	#31
chevys2die4 Junior Member Join Date: Aug 2005 Location: Bryan,OH Posts: 157	Re: Suspension Parts FS AZ are they drop spindles to? I wanted to convert to 5 lug, but? what is your bottom dollar on kit wsprings? __________________ 68 SB 396 72 SB CHEYENNE 402 04 Silverado SS

03-05-2008, 11:05 PM	#32
clean71 Registered User Join Date: Aug 2002 Location: San Diego, CA Posts: 335	Re: Suspension Parts FS AZ Yep, they're 2.5 in drop spindles. Make me an offer. I won't be offended if it's too low. I'll just let you know. You can see what I paid for them. I know there are other kits ranging from about $500 to what I paid. I know I'm going to take a loss and I'd rather have someone use them than have them sitting in storage for the next 3 years. The benefit here is that they are made specifically for our trucks and will be a bolt-on affair. Let me know. __________________ CPO U.S. Navy(Ret) 1972 GMC Jimmy 4x4 Custom 1972 GMC Jimmy 2x4 Custom

03-10-2008, 11:15 AM	#33
AZRATTLER Registered User Join Date: Aug 2006 Location: TUCSON AZ Posts: 20	Re: Suspension Parts FS AZ do you still have the rear drop springs? __________________ 1967 C-10 SHORT BED FLEETSIDE WITH SMALL WINDOW TURBO 400 REVERSE SHIFT , MANUAL VALVE BODY B&M QUICK CLICK SHIFTER SMALL BLOCK 350

03-11-2008, 01:37 AM	#34
clean71 Registered User Join Date: Aug 2002 Location: San Diego, CA Posts: 335	Re: Suspension Parts FS AZ Everything is sold except the front power disc drop conversion kit and the firewall insulators. Thanks. __________________ CPO U.S. Navy(Ret) 1972 GMC Jimmy 4x4 Custom 1972 GMC Jimmy 2x4 Custom

03-11-2008, 04:43 AM	#35
chevys2die4 Junior Member Join Date: Aug 2005 Location: Bryan,OH Posts: 157	Re: Suspension Parts FS AZ PM Sent __________________ 68 SB 396 72 SB CHEYENNE 402 04 Silverado SS

03-11-2008, 05:39 AM	#36
Riveted1 Tasty Cakes! Join Date: Apr 2003 Location: Gilbert, AZ Posts: 2,112	Re: Suspension Parts FS AZ Do you still have the disc brake kit? If so, I'll take it pending agreement on a price. __________________ I'm a little and a lot Ground beef: A cow with no legs. ---------------- '66 Chevy SWB "Penny" '67 Chevy Big Window SWB- aka "Pearl" '72 Burb- "Betty" "It's not a hearse dammit" '99 Chevy Ext. cab Silverado

03-19-2008, 06:51 AM	#37
clean71 Registered User Join Date: Aug 2002 Location: San Diego, CA Posts: 335	Re: Suspension Parts FS AZ Updated prices. __________________ CPO U.S. Navy(Ret) 1972 GMC Jimmy 4x4 Custom 1972 GMC Jimmy 2x4 Custom



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.